On Tue, Jan 23, 2024 at 02:22:18PM +0000, Jonathan Cameron wrote:
> On Tue, 23 Jan 2024 13:10:44 +0000
> "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx> wrote:
>
> > On Tue, Jan 23, 2024 at 10:26:03AM +0000, Jonathan Cameron wrote:
> > > On Tue, 2 Jan 2024 14:53:20 +0000
> > > Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> wrote:
> > >
> > > > On Mon, 18 Dec 2023 13:03:32 +0000
> > > > "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx> wrote:
> > > >
> > > > > On Wed, Dec 13, 2023 at 12:50:38PM +0000, Russell King wrote:
> > > > > > From: James Morse <james.morse@xxxxxxx>
> > > > > >
> > > > > > acpi_processor_get_info() registers all present CPUs. Registering a
> > > > > > CPU is what creates the sysfs entries and triggers the udev
> > > > > > notifications.
> > > > > >
> > > > > > arm64 virtual machines that support 'virtual cpu hotplug' use the
> > > > > > enabled bit to indicate whether the CPU can be brought online, as
> > > > > > the existing ACPI tables require all hardware to be described and
> > > > > > present.
> > > > > >
> > > > > > If firmware describes a CPU as present, but disabled, skip the
> > > > > > registration. Such CPUs are present, but can't be brought online for
> > > > > > whatever reason. (e.g. firmware/hypervisor policy).
> > > > > >
> > > > > > Once firmware sets the enabled bit, the CPU can be registered and
> > > > > > brought online by user-space. Online CPUs, or CPUs that are missing
> > > > > > an _STA method must always be registered.
> > > > >
> > > > > ...
> > > > >
> > > > > > @@ -526,6 +552,9 @@ static void acpi_processor_post_eject(struct acpi_device *device)
> > > > > > acpi_processor_make_not_present(device);
> > > > > > return;
> > > > > > }
> > > > > > +
> > > > > > + if (cpu_present(pr->id) && !(sta & ACPI_STA_DEVICE_ENABLED))
> > > > > > + arch_unregister_cpu(pr->id);
> > > > >
> > > > > This change isn't described in the commit log, but seems to be the cause
> > > > > of the build error identified by the kernel build bot that is fixed
> > > > > later in this series. I'm wondering whether this should be in a
> > > > > different patch, maybe "ACPI: Check _STA present bit before making CPUs
> > > > > not present" ?
> > > >
> > > > Would seem a bit odd to call arch_unregister_cpu() way before the code
> > > > is added to call the matching arch_registers_cpu()
> > > >
> > > > Mind you this eject doesn't just apply to those CPUs that are registered
> > > > later I think, but instead to all. So we run into the spec hole that
> > > > there is no way to identify initially 'enabled' CPUs that might be disabled
> > > > later.
> > > >
> > > > >
> > > > > Or maybe my brain isn't working properly (due to being Covid positive.)
> > > > > Any thoughts, Jonathan?
> > > >
> > > > I'll go with a resounding 'not sure' on where this change belongs.
> > > > I blame my non existent start of the year hangover.
> > > > Hope you have recovered!
> > >
> > > Looking again, I think you were right, move it to that earlier patch.
> >
> > I'm having second thoughts - because this patch introduces the
> > arch_register_cpu() into the acpi_processor_add() path (via
> > acpi_processor_get_info() and acpi_processor_make_enabled(), so isn't
> > it also correct to add arch_unregister_cpu() to the detach/post_eject
> > path as well? If we add one without the other, doesn't stuff become
> > a bit asymetric?
> >
> > Looking more deeply at these changes, I'm finding it isn't easy to
> > keep track of everything that's going on here.
>
> I can sympathize.
>
> >
> > We had attach()/detach() callbacks that were nice and symetrical.
> > How we have this post_eject() callback that makes things asymetrical.
> >
> > We have the attach() method that registers the CPU, but no detach
> > method, instead having the post_eject() method. On the face of it,
> > arch_unregister_cpu() doesn't look symetric unless one goes digging
> > more in the code - by that, I mean arch_register_cpu() only gets
> > called of present=1 _and_ enabled=1. However, arch_unregister_cpu()
> > gets called buried in acpi_processor_make_not_present(), called when
> > present=0, and then we have this new one to handle the case where
> > enabled=0. It is not obvious that arch_unregister_cpu() is the reverse
> > of what happens with arch_register_cpu() here.
>
> One option would be to pull the arch_unregister_cpu() out so it
> happens in one place in both the present = 0 and enabled = 0 cases but
> I'm not sure if it's safe to reorder the contents of
> acpi_processor_not_present() as it's followed by a bunch of things.
>
> Would looks something like
>
> if (cpu_present(pr->id)) {
> if (!(sta & ACPI_STA_DEVICE_PRESENT)) {
> acpi_processor_make_not_present(device); /* Remove arch_cpu_unregister() */
> } else if (!(sta & ACPI_STA_DEVICE_ENABLED)) {
> /* Nothing to do in this case */
> } else {
> return; /* Firmware did something silly - probably racing */
> }
> arch_unregister_cpu(pr->id);
>
> return;
> }
>
> >
> > Then we have the add() method allocating pr->throttling.shared_cpu_map,
> > and acpi_processor_make_not_present() freeing it. From what I read in
> > ACPI v6.5, enabled is not allowed to be set without present. So, if
> > _STA reports that a CPU that had present=1 enabled=1, but then is
> > later reported to be enabled=0 (which we handle by calling only
> > arch_unregister_cpu()) then what happens when _STA changes to
> > enabled=1 later? Does add() get called?
>
> yes it does (I poked it to see) which indeed isn't good (unless I've
> broken my setup in some obscure way).
Thanks for confirming - I haven't had a chance to do any testing (late
lunch because of spending so long looking at this...)
> Seems we need a few more things than arch_unregister_cpu() pulled out
> in the above code.
Yes, and I also wonder whether we should be doing any of that
unconditionally...
> > If it does, this would cause
> > a new acpi_processor structure to be allocated and the old one to be
> > leaked... I hope I'm wrong about add() being called - but if it isn't,
> > how does enabled going from 0->1 get handled... and if we are handling
> > its 1->0 transition separately from present, then surely we should be
> > handling that.
> >
> > Maybe I'm just getting confused, but I've spent much of this morning
> > trying to unravel all this... and I'm of the opinion that this isn't a
> > sign of a good approach.
>
> It's all annoyingly messy at the root of things, but indeed you've found
> some issues in current implementation. Feels like just ripping out
> a bunch of stuff from acpi_processor_make_not_present() and calling it
> for both paths will probably work, but I've not tested that yet.
... since surely if we've already got to the point of issuing a
post_eject() callback, the device has already been ejected
and thus has gone - and if it is ever "replaced" we will get an
attach() callback.
Moreover, looking at acpi_scan_hot_remove(), if we are the device
being ejected, then after ej0 is evaluated, _STA is checked, and
acpi_bus_post_eject() called only if enabled=0. (This will also
end up calling post_eject() for any children as well which won't
have their _STA evaluated.)
So this has got me wondering whether acpi_processor_post_eject()
should be doing all the cleanup in acpi_processor_make_not_present()
except if we believe the call is in error (e.g.
!ACPI_HOTPLUG_PRESENT_CPU and present=0) - thus preparing the way
for a future attach() callback.
Hmm. I wonder if Rafael has any input on this.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
