Re: [PATCH 05/13] spi: axi-spi-engine: add SPI offload support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 10, 2024 at 04:31:25PM -0600, David Lechner wrote:
> On Wed, Jan 10, 2024 at 3:39 PM Mark Brown <broonie@xxxxxxxxxx> wrote:

> > Glancing through here I'm not seeing anything here that handles DMA
> > mapping, given that the controller will clearly be doing DMA here that
> > seems surprising.

> In the use case implemented in this series, the RX data is going to
> DMA, but in general, that doesn't have to be the case. In theory, it
> could get piped directly to a DSP or something like that. So I left
> the RX DMA part out of the SPI controller and implemented as a
> separate device in "iio: offload: add new PWM triggered DMA buffer
> driver". The SPI controller itself isn't aware that it is connected to
> DMA (i.e. there are no registers that have to be poked to enable DMA
> or anything like that).

If there's a buffer being assigned to the device (or removed from the
device) it needs mapping, this will ensure the device is allowed to
access it if there's IOMMUs involved, and that there's no pending cache
operations which could corrupt data.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux