On Wed, 18 Sep 2013, Maxime COQUELIN wrote:
> This patch supplies I2C configuration to STiH415 SoC.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@xxxxxx>
> ---
> arch/arm/boot/dts/stih415-pinctrl.dtsi | 36 ++++++++++++++++++++
> arch/arm/boot/dts/stih415.dtsi | 57 ++++++++++++++++++++++++++++++++
> 2 files changed, 93 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
> index 1d322b2..e56449d 100644
> --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
> @@ -86,6 +86,24 @@
> };
> };
> };
> +
> + sbc_i2c0 {
> + pinctrl_sbc_i2c0_default: sbc_i2c0-default {
> + st,pins {
> + sda = <&PIO4 6 ALT1 BIDIR>;
> + scl = <&PIO4 5 ALT1 BIDIR>;
> + };
> + };
> + };
> +
> + sbc_i2c1 {
> + pinctrl_sbc_i2c1_default: sbc_i2c1-default {
> + st,pins {
> + sda = <&PIO3 2 ALT2 BIDIR>;
> + scl = <&PIO3 1 ALT2 BIDIR>;
> + };
> + };
> + };
> };
>
> pin-controller-front {
> @@ -143,6 +161,24 @@
> reg = <0x7000 0x100>;
> st,bank-name = "PIO12";
> };
> +
> + i2c0 {
> + pinctrl_i2c0_default: i2c0-default {
> + st,pins {
> + sda = <&PIO9 3 ALT1 BIDIR>;
> + scl = <&PIO9 2 ALT1 BIDIR>;
> + };
> + };
> + };
> +
> + i2c1 {
> + pinctrl_i2c1_default: i2c1-default {
> + st,pins {
> + sda = <&PIO12 1 ALT1 BIDIR>;
> + scl = <&PIO12 0 ALT1 BIDIR>;
> + };
> + };
> + };
> };
>
> pin-controller-rear {
> diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
> index 74ab8de..643ae1c 100644
> --- a/arch/arm/boot/dts/stih415.dtsi
> +++ b/arch/arm/boot/dts/stih415.dtsi
> @@ -9,6 +9,7 @@
> #include "stih41x.dtsi"
> #include "stih415-clock.dtsi"
> #include "stih415-pinctrl.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> / {
>
> L2: cache-controller {
> @@ -83,5 +84,61 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_sbc_serial1>;
> };
> +
> + i2c0: i2c@fed40000{
Space before the '{'.
> + compatible = "st,comms-i2c";
> + status = "disabled";
Consider putting the node status at the bottom.
> + reg = <0xfed40000 0x110>;
> + interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&CLKS_ICN_REG_0>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c0_default>;
> + st,glitches;
> + st,glitch-clk = <500>;
> + st,glitch-dat = <500>;
> + };
> +
> + i2c1: i2c@fed41000{
Same here and throughout.
> + compatible = "st,comms-i2c";
> + status = "disabled";
Same here and throughout.
> + reg = <0xfed41000 0x110>;
> + interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&CLKS_ICN_REG_0>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1_default>;
> + st,glitches;
> + st,glitch-clk = <500>;
> + st,glitch-dat = <500>;
> + };
> +
> + sbc_i2c0: i2c@fe540000{
> + compatible = "st,comms-i2c";
> + status = "disabled";
> + reg = <0xfe540000 0x110>;
> + interrupts = <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&CLK_SYSIN>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sbc_i2c0_default>;
> + st,glitches;
> + st,glitch-clk = <500>;
> + st,glitch-dat = <500>;
> + };
> +
> + sbc_i2c1: i2c@fe541000{
> + compatible = "st,comms-i2c";
> + status = "disabled";
> + reg = <0xfe541000 0x110>;
> + interrupts = <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&CLK_SYSIN>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sbc_i2c1_default>;
> + st,glitches;
> + st,glitch-clk = <500>;
> + st,glitch-dat = <500>;
> + };
> };
> };
Is this odd tabbing just the result of the patch format?
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
