[PATCH v5 15/44] drm/connector: hdmi: Compute bpc and format automatically

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that we have all the infrastructure needed, we can add some code
that will, for a given connector state and mode, compute the best output
format and bpc.

The algorithm is the same one than the one already found in i915 and
vc4.

Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
---
 drivers/gpu/drm/drm_atomic_state_helper.c          | 183 ++++++-
 .../gpu/drm/tests/drm_atomic_state_helper_test.c   | 529 ++++++++++++++++++++-
 drivers/gpu/drm/tests/drm_kunit_edid.h             | 160 +++++++
 3 files changed, 860 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index a36edda590f8..2442b5a2d94f 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -682,6 +682,96 @@ static bool hdmi_is_full_range(const struct drm_connector *connector,
 	return drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL ? true : false;
 }
 
+static bool
+sink_supports_format_bpc(const struct drm_connector *connector,
+			 const struct drm_display_info *info,
+			 const struct drm_display_mode *mode,
+			 unsigned int format, unsigned int bpc)
+{
+	struct drm_device *dev = connector->dev;
+	u8 vic = drm_match_cea_mode(mode);
+
+	if (vic == 1 && bpc != 8) {
+		drm_dbg(dev, "VIC1 requires a bpc of 8, got %u\n", bpc);
+		return false;
+	}
+
+	if (!info->is_hdmi &&
+	    (format != HDMI_COLORSPACE_RGB || bpc != 8)) {
+		drm_dbg(dev, "DVI Monitors require an RGB output at 8 bpc\n");
+		return false;
+	}
+
+	if (!(connector->hdmi.supported_formats & BIT(format))) {
+		drm_dbg(dev, "%s format unsupported by the connector.\n",
+			drm_hdmi_connector_get_output_format_name(format));
+		return false;
+	}
+
+	switch (format) {
+	case HDMI_COLORSPACE_RGB:
+		drm_dbg(dev, "RGB Format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444))
+			return false;
+
+		if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) {
+			drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
+			return false;
+		}
+
+		if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) {
+			drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "RGB format supported in that configuration.\n");
+
+		return true;
+
+	case HDMI_COLORSPACE_YUV422:
+		drm_dbg(dev, "YUV422 format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) {
+			drm_dbg(dev, "Sink doesn't support YUV422.\n");
+			return false;
+		}
+
+		if (bpc != 12) {
+			drm_dbg(dev, "YUV422 only supports 12 bpc.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "YUV422 format supported in that configuration.\n");
+
+		return true;
+
+	case HDMI_COLORSPACE_YUV444:
+		drm_dbg(dev, "YUV444 format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR444)) {
+			drm_dbg(dev, "Sink doesn't support YUV444.\n");
+			return false;
+		}
+
+		if (bpc == 10 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_30)) {
+			drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
+			return false;
+		}
+
+		if (bpc == 12 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_36)) {
+			drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "YUV444 format supported in that configuration.\n");
+
+		return true;
+	}
+
+	return false;
+}
+
 static enum drm_mode_status
 hdmi_clock_valid(const struct drm_connector *connector,
 		 const struct drm_display_mode *mode,
@@ -726,6 +816,95 @@ hdmi_compute_clock(const struct drm_connector *connector,
 	return 0;
 }
 
+static bool
+hdmi_try_format_bpc(const struct drm_connector *connector,
+		    struct drm_connector_state *state,
+		    const struct drm_display_mode *mode,
+		    unsigned int bpc, enum hdmi_colorspace fmt)
+{
+	const struct drm_display_info *info = &connector->display_info;
+	struct drm_device *dev = connector->dev;
+	int ret;
+
+	drm_dbg(dev, "Trying %s output format\n",
+		drm_hdmi_connector_get_output_format_name(fmt));
+
+	if (!sink_supports_format_bpc(connector, info, mode, fmt, bpc)) {
+		drm_dbg(dev, "%s output format not supported with %u bpc\n",
+			drm_hdmi_connector_get_output_format_name(fmt), bpc);
+		return false;
+	}
+
+	ret = hdmi_compute_clock(connector, state, mode, bpc, fmt);
+	if (ret) {
+		drm_dbg(dev, "Couldn't compute clock for %s output format and %u bpc\n",
+			drm_hdmi_connector_get_output_format_name(fmt), bpc);
+		return false;
+	}
+
+	drm_dbg(dev, "%s output format supported with %u (TMDS char rate: %llu Hz)\n",
+		drm_hdmi_connector_get_output_format_name(fmt), bpc, state->hdmi.tmds_char_rate);
+
+	return true;
+}
+
+static int
+hdmi_compute_format(const struct drm_connector *connector,
+		    struct drm_connector_state *state,
+		    const struct drm_display_mode *mode,
+		    unsigned int bpc)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (hdmi_try_format_bpc(connector, state, mode, bpc, HDMI_COLORSPACE_RGB)) {
+		state->hdmi.output_format = HDMI_COLORSPACE_RGB;
+		return 0;
+	}
+
+	if (hdmi_try_format_bpc(connector, state, mode, bpc, HDMI_COLORSPACE_YUV422)) {
+		state->hdmi.output_format = HDMI_COLORSPACE_YUV422;
+		return 0;
+	}
+
+	drm_dbg(dev, "Failed. No Format Supported for that bpc count.\n");
+
+	return -EINVAL;
+}
+
+static int
+hdmi_compute_config(const struct drm_connector *connector,
+		    struct drm_connector_state *state,
+		    const struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+	unsigned int max_bpc = clamp_t(unsigned int,
+				       state->max_bpc,
+				       8, connector->max_bpc);
+	unsigned int bpc;
+	int ret;
+
+	for (bpc = max_bpc; bpc >= 8; bpc -= 2) {
+		drm_dbg(dev, "Trying with a %d bpc output\n", bpc);
+
+		ret = hdmi_compute_format(connector, state, mode, bpc);
+		if (ret)
+			continue;
+
+		state->hdmi.output_bpc = bpc;
+
+		drm_dbg(dev,
+			"Mode %ux%u @ %uHz: Found configuration: bpc: %u, fmt: %s, clock: %llu\n",
+			mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode),
+			state->hdmi.output_bpc,
+			drm_hdmi_connector_get_output_format_name(state->hdmi.output_format),
+			state->hdmi.tmds_char_rate);
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
  * @connector: DRM Connector
@@ -751,9 +930,7 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
 
 	new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);
 
-	ret = hdmi_compute_clock(connector, new_state, mode,
-				 new_state->hdmi.output_bpc,
-				 new_state->hdmi.output_format);
+	ret = hdmi_compute_config(connector, new_state, mode);
 	if (ret)
 		return ret;
 
diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
index e7dbdd4a4e7f..860e34b00fee 100644
--- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
@@ -70,9 +70,6 @@ static int light_up_connector(struct kunit *test,
 	conn_state = drm_atomic_get_connector_state(state, connector);
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
 
-	conn_state->hdmi.output_bpc = connector->max_bpc;
-	conn_state->hdmi.output_format = HDMI_COLORSPACE_RGB;
-
 	ret = drm_atomic_set_crtc_for_connector(conn_state, crtc);
 	KUNIT_EXPECT_EQ(test, ret, 0);
 
@@ -720,10 +717,15 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
 						     10);
 	KUNIT_ASSERT_NOT_NULL(test, priv);
 
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
 	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
 
-	conn = &priv->connector;
 	preferred = find_preferred_mode(conn);
 	KUNIT_ASSERT_NOT_NULL(test, preferred);
 
@@ -741,11 +743,11 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
 	old_conn_state = drm_atomic_get_old_connector_state(state, conn);
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
 
-	new_conn_state->hdmi.output_bpc = 8;
+	new_conn_state->max_requested_bpc = 8;
 
 	KUNIT_ASSERT_NE(test,
-			old_conn_state->hdmi.output_bpc,
-			new_conn_state->hdmi.output_bpc);
+			old_conn_state->max_requested_bpc,
+			new_conn_state->max_requested_bpc);
 
 	ret = drm_atomic_check_only(state);
 	KUNIT_ASSERT_EQ(test, ret, 0);
@@ -789,10 +791,15 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
 						     10);
 	KUNIT_ASSERT_NOT_NULL(test, priv);
 
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
 	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
 
-	conn = &priv->connector;
 	preferred = find_preferred_mode(conn);
 	KUNIT_ASSERT_NOT_NULL(test, preferred);
 
@@ -832,6 +839,56 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
 	KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
 }
 
+/*
+ * Test that if we have an HDMI connector but a !HDMI display, we always
+ * output RGB with 8 bpc.
+ */
+static void drm_test_check_output_bpc_dvi(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_display_info *info;
+	struct drm_display_mode *preferred;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB) |
+						     BIT(HDMI_COLORSPACE_YUV422) |
+						     BIT(HDMI_COLORSPACE_YUV444),
+						     12);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_dvi_1080p,
+				 ARRAY_SIZE(test_edid_dvi_1080p));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	info = &conn->display_info;
+	KUNIT_ASSERT_FALSE(test, info->is_hdmi);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	conn_state = conn->state;
+	KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
 /*
  * Test that when doing a commit which would use RGB 8bpc, the TMDS
  * clock rate stored in the connector state is equal to the mode clock
@@ -1024,6 +1081,452 @@ static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test)
 	KUNIT_EXPECT_LT(test, ret, 0);
 }
 
+/*
+ * Test that if:
+ * - We have an HDMI connector supporting RGB only
+ * - The chosen mode has a TMDS character rate higher than the display
+ *   supports in RGB/12bpc
+ * - The chosen mode has a TMDS character rate lower than the display
+ *   supports in RGB/10bpc.
+ *
+ * Then we will pick the latter, and the computed TMDS character rate
+ * will be equal to 1.25 times the mode pixel clock.
+ */
+static void drm_test_check_max_tmds_rate_bpc_fallback(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_display_info *info;
+	struct drm_display_mode *preferred;
+	unsigned long long rate;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     12);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	info = &conn->display_info;
+	KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+	KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+	KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+	KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB);
+	KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	conn_state = conn->state;
+	KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1250);
+}
+
+/*
+ * Test that if:
+ * - We have an HDMI connector supporting both RGB and YUV422 and up to
+ *   12 bpc
+ * - The chosen mode has a TMDS character rate higher than the display
+ *   supports in RGB/12bpc
+ * - The chosen mode has a TMDS character rate lower than the display
+ *   supports in YUV422/12bpc.
+ *
+ * Then we will pick the latter, and the computed TMDS character rate
+ * will be equal to the mode pixel clock.
+ */
+static void drm_test_check_max_tmds_rate_format_fallback(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_display_info *info;
+	struct drm_display_mode *preferred;
+	unsigned long long rate;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB) |
+						     BIT(HDMI_COLORSPACE_YUV422) |
+						     BIT(HDMI_COLORSPACE_YUV444),
+						     12);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	info = &conn->display_info;
+	KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+	KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+	KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+	KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+	KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	conn_state = conn->state;
+	KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 12);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_YUV422);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1000);
+}
+
+/*
+ * Test that if a driver and screen supports RGB and YUV formats, and we
+ * try to set the VIC 1 mode, we end up with 8bpc RGB even if we could
+ * have had a higher bpc.
+ */
+static void drm_test_check_output_bpc_format_vic_1(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_display_info *info;
+	struct drm_display_mode *mode;
+	unsigned long long rate;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB) |
+						     BIT(HDMI_COLORSPACE_YUV422) |
+						     BIT(HDMI_COLORSPACE_YUV444),
+						     12);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	info = &conn->display_info;
+	KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+	KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	mode = drm_display_mode_from_cea_vic(drm, 1);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	/*
+	 * NOTE: We can't use drm_connector_hdmi_compute_mode_clock()
+	 * here because we're trying to get the rate of an invalid
+	 * configuration.
+	 *
+	 * Thus, we have to calculate the rate by hand.
+	 */
+	rate = mode->clock * 1500;
+	KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	conn_state = conn->state;
+	KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a driver supports only RGB but the screen also supports
+ * YUV formats, we only end up with an RGB format.
+ */
+static void drm_test_check_output_bpc_format_driver_rgb_only(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_display_info *info;
+	struct drm_display_mode *preferred;
+	unsigned long long rate;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     12);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	info = &conn->display_info;
+	KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+	KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+	/*
+	 * We're making sure that YUV422 would be the preferred option
+	 * here: we're always favouring higher bpc, we can't have RGB
+	 * because the TMDS character rate exceeds the maximum supported
+	 * by the display, and YUV422 works for that display.
+	 *
+	 * But since the driver only supports RGB, we should fallback to
+	 * a lower bpc with RGB.
+	 */
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+	KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+	KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	conn_state = conn->state;
+	KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+	KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a screen supports only RGB but the driver also supports
+ * YUV formats, we only end up with an RGB format.
+ */
+static void drm_test_check_output_bpc_format_display_rgb_only(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_display_info *info;
+	struct drm_display_mode *preferred;
+	unsigned long long rate;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB) |
+						     BIT(HDMI_COLORSPACE_YUV422) |
+						     BIT(HDMI_COLORSPACE_YUV444),
+						     12);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_max_200mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_200mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	info = &conn->display_info;
+	KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+	KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+	/*
+	 * We're making sure that YUV422 would be the preferred option
+	 * here: we're always favouring higher bpc, we can't have RGB
+	 * because the TMDS character rate exceeds the maximum supported
+	 * by the display, and YUV422 works for that display.
+	 *
+	 * But since the display only supports RGB, we should fallback to
+	 * a lower bpc with RGB.
+	 */
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+	KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+	KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	conn_state = conn->state;
+	KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+	KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a display supports higher bpc but the driver only
+ * supports 8 bpc, we only end up with 8 bpc even if we could have had a
+ * higher bpc.
+ */
+static void drm_test_check_output_bpc_format_driver_8bpc_only(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_display_info *info;
+	struct drm_display_mode *preferred;
+	unsigned long long rate;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     8);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	info = &conn->display_info;
+	KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+	KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+	/*
+	 * We're making sure that we have headroom on the TMDS character
+	 * clock to actually use 12bpc.
+	 */
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+	KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	conn_state = conn->state;
+	KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a driver supports higher bpc but the display only
+ * supports 8 bpc, we only end up with 8 bpc even if we could have had a
+ * higher bpc.
+ */
+static void drm_test_check_output_bpc_format_display_8bpc_only(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_display_info *info;
+	struct drm_display_mode *preferred;
+	unsigned long long rate;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB) |
+						     BIT(HDMI_COLORSPACE_YUV422) |
+						     BIT(HDMI_COLORSPACE_YUV444),
+						     12);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_max_340mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_340mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	info = &conn->display_info;
+	KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+	KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+	/*
+	 * We're making sure that we have headroom on the TMDS character
+	 * clock to actually use 12bpc.
+	 */
+	rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+	KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	conn_state = conn->state;
+	KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
 static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
 	KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
 	KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
@@ -1034,8 +1537,16 @@ static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
 	KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
 	KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
 	KUNIT_CASE(drm_test_check_hdmi_funcs_reject_rate),
+	KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback),
+	KUNIT_CASE(drm_test_check_max_tmds_rate_format_fallback),
 	KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
 	KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
+	KUNIT_CASE(drm_test_check_output_bpc_dvi),
+	KUNIT_CASE(drm_test_check_output_bpc_format_vic_1),
+	KUNIT_CASE(drm_test_check_output_bpc_format_display_8bpc_only),
+	KUNIT_CASE(drm_test_check_output_bpc_format_display_rgb_only),
+	KUNIT_CASE(drm_test_check_output_bpc_format_driver_8bpc_only),
+	KUNIT_CASE(drm_test_check_output_bpc_format_driver_rgb_only),
 	KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_8bpc),
 	KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_10bpc),
 	KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_12bpc),
@@ -1167,7 +1678,7 @@ static void drm_test_check_format_value(struct kunit *test)
 
 	conn = &priv->connector;
 	conn_state = conn->state;
-	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, 0);
 }
 
 /*
diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h
index 24f3377ef0f0..3e3527c58c31 100644
--- a/drivers/gpu/drm/tests/drm_kunit_edid.h
+++ b/drivers/gpu/drm/tests/drm_kunit_edid.h
@@ -1,6 +1,64 @@
 #ifndef DRM_KUNIT_EDID_H_
 #define DRM_KUNIT_EDID_H_
 
+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 0a 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ab
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ *   EDID Structure Version & Revision: 1.3
+ *   Vendor & Product Identification:
+ *     Manufacturer: LNX
+ *     Model: 42
+ *     Made in: 2023
+ *   Basic Display Parameters & Features:
+ *     Digital display
+ *     DFP 1.x compatible TMDS
+ *     Maximum image size: 160 cm x 90 cm
+ *     Gamma: 2.20
+ *     RGB color display
+ *     First detailed timing is the preferred timing
+ *   Color Characteristics:
+ *     Red  : 0.0000, 0.0000
+ *     Green: 0.0000, 0.0000
+ *     Blue : 0.0000, 0.0000
+ *     White: 0.0000, 0.0000
+ *   Established Timings I & II: none
+ *   Standard Timings: none
+ *   Detailed Timing Descriptors:
+ *     DTD 1:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (1600 mm x 900 mm)
+ *                  Hfront   88 Hsync  44 Hback  148 Hpol P
+ *                  Vfront    4 Vsync   5 Vback   36 Vpol P
+ *     Display Product Name: 'Test EDID'
+ *     Display Range Limits:
+ *       Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ *     Dummy Descriptor:
+ * Checksum: 0xab
+ */
+const unsigned char test_edid_dvi_1080p[] = {
+  0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+  0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+  0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+  0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+  0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+  0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+  0x46, 0x1e, 0x46, 0x0f, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+  0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xab
+};
+
 /*
  * edid-decode (hex):
  *
@@ -103,6 +161,108 @@ const unsigned char test_edid_hdmi_1080p_rgb_max_200mhz[] = {
   0x00, 0x00, 0x00, 0xd0
 };
 
+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00
+ * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 92
+ *
+ * 02 03 1b 81 e3 05 00 20 41 10 e2 00 4a 6d 03 0c
+ * 00 12 34 00 28 20 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ *   EDID Structure Version & Revision: 1.3
+ *   Vendor & Product Identification:
+ *     Manufacturer: LNX
+ *     Model: 42
+ *     Made in: 2023
+ *   Basic Display Parameters & Features:
+ *     Digital display
+ *     DFP 1.x compatible TMDS
+ *     Maximum image size: 160 cm x 90 cm
+ *     Gamma: 2.20
+ *     Monochrome or grayscale display
+ *     First detailed timing is the preferred timing
+ *   Color Characteristics:
+ *     Red  : 0.0000, 0.0000
+ *     Green: 0.0000, 0.0000
+ *     Blue : 0.0000, 0.0000
+ *     White: 0.0000, 0.0000
+ *   Established Timings I & II:
+ *     DMT 0x04:   640x480    59.940476 Hz   4:3     31.469 kHz     25.175000 MHz
+ *   Standard Timings: none
+ *   Detailed Timing Descriptors:
+ *     DTD 1:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (1600 mm x 900 mm)
+ *                  Hfront   88 Hsync  44 Hback  148 Hpol P
+ *                  Vfront    4 Vsync   5 Vback   36 Vpol P
+ *     Display Product Name: 'Test EDID'
+ *     Display Range Limits:
+ *       Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ *     Dummy Descriptor:
+ *   Extension blocks: 1
+ * Checksum: 0x92
+ *
+ * ----------------
+ *
+ * Block 1, CTA-861 Extension Block:
+ *   Revision: 3
+ *   Underscans IT Video Formats by default
+ *   Native detailed modes: 1
+ *   Colorimetry Data Block:
+ *     sRGB
+ *   Video Data Block:
+ *     VIC  16:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz
+ *   Video Capability Data Block:
+ *     YCbCr quantization: No Data
+ *     RGB quantization: Selectable (via AVI Q)
+ *     PT scan behavior: No Data
+ *     IT scan behavior: Always Underscanned
+ *     CE scan behavior: Always Underscanned
+ *   Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
+ *     Source physical address: 1.2.3.4
+ *     Maximum TMDS clock: 340 MHz
+ *     Extended HDMI video details:
+ * Checksum: 0xd0  Unused space in Extension Block: 100 bytes
+ */
+const unsigned char test_edid_hdmi_1080p_rgb_max_340mhz[] = {
+  0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+  0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
+  0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+  0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+  0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+  0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+  0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+  0x46, 0x00, 0x00, 0xc4, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+  0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x41, 0x02, 0x03, 0x1b, 0x81,
+  0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0x4a, 0x6d, 0x03, 0x0c,
+  0x00, 0x12, 0x34, 0x00, 0x44, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0xd0
+};
+
 /*
  * edid-decode (hex):
  *

-- 
2.43.0





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux