Hi Ahmad,
On Tue, 5 Dec 2023 at 04:48, Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
>
> Hello Simon,
>
> On 02.12.23 04:54, Simon Glass wrote:
> > Add a script which produces a Flat Image Tree (FIT), a single file
> > containing the built kernel and associated devicetree files.
> > Compression defaults to gzip which gives a good balance of size and
> > performance.
> >
> > The files compress from about 86MB to 24MB using this approach.
> >
> > The FIT can be used by bootloaders which support it, such as U-Boot
> > and Linuxboot. It permits automatic selection of the correct
> > devicetree, matching the compatible string of the running board with
> > the closest compatible string in the FIT. There is no need for
> > filenames or other workarounds.
> >
> > Add a 'make image.fit' build target for arm64, as well. Use
> > FIT_COMPRESSION to select a different algorithm.
> >
> > The FIT can be examined using 'dumpimage -l'.
> >
> > This features requires pylibfdt (use 'pip install libfdt'). It also
> > requires compression utilities for the algorithm being used. Supported
> > compression options are the same as the Image.xxx files. For now there
> > is no way to change the compression other than by editing the rule for
> > $(obj)/image.fit
> >
> > While FIT supports a ramdisk / initrd, no attempt is made to support
> > this here, since it must be built separately from the Linux build.
> >
> > Signed-off-by: Simon Glass <sjg@xxxxxxxxxxxx>
>
> kernel_noload support is now in barebox next branch and I tested this
> series against it:
>
> Tested-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> # barebox
>
OK great thank you.
> > +"""Build a FIT containing a lot of devicetree files
> > +
> > +Usage:
> > + make_fit.py -A arm64 -n 'Linux-6.6' -O linux
> > + -f arch/arm64/boot/image.fit -k /tmp/kern/arch/arm64/boot/image.itk
> > + /tmp/kern/arch/arm64/boot/dts/ -E -c gzip
> > +
> > +Creates a FIT containing the supplied kernel and a directory containing the
> > +devicetree files.
> > +
> > +Use -E to generate an external FIT (where the data is placed after the
> > +FIT data structure). This allows parsing of the data without loading
> > +the entire FIT.
> > +
> > +Use -c to compress the data, using bzip2, gzip, lz4, lzma, lzo and
> > +zstd algorithms.
> > +
> > +The resulting FIT can be booted by bootloaders which support FIT, such
> > +as U-Boot, Linuxboot, Tianocore, etc.
>
> Feel free to add barebox to the list. Did you check whether Linuxboot and
> Tianocore support kernel_noload?
Only what I was told by people in those projects. They may not even
look at the load address, but I am not an expert on that.
>
> > + fsw.property_u32('load', 0)
> > + fsw.property_u32('entry', 0)
>
> I still think load and entry dummy values are confusing and should be dropped.
This is what the spec requires at present. But I agree we should
change it. I will dig into that at some point to see what is needed.
>
> > + with fsw.add_node(f'fdt-{seq}'):
> > + # Get the compatible / model information
> > + with open(fname, 'rb') as inf:
> > + data = inf.read()
> > + fdt = libfdt.FdtRo(data)
> > + model = fdt.getprop(0, 'model').as_str()
> > + compat = fdt.getprop(0, 'compatible')
> > +
> > + fsw.property_string('description', model)
> > + fsw.property_string('type', 'flat_dt')
> > + fsw.property_string('arch', arch)
> > + fsw.property_string('compression', compress)
> > + fsw.property('compatible', bytes(compat))
> > +
> > + with open(fname, 'rb') as inf:
> > + compressed = compress_data(inf, compress)
> > + fsw.property('data', compressed)
> > + return model, compat
>
> After Doug's elaboration, extracting multiple compatibles is fine by me.
OK good.
Regards,
Simon
