Should be 'if' here. Signed-off-by: Tsung-Han Lin <tsunghan.tw@xxxxxxxxx> --- Documentation/arch/arm64/arm-acpi.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/arch/arm64/arm-acpi.rst b/Documentation/arch/arm64/arm-acpi.rst index a46c34fa9604..e59e4505d0d9 100644 --- a/Documentation/arch/arm64/arm-acpi.rst +++ b/Documentation/arch/arm64/arm-acpi.rst @@ -130,7 +130,7 @@ When an Arm system boots, it can either have DT information, ACPI tables, or in some very unusual cases, both. If no command line parameters are used, the kernel will try to use DT for device enumeration; if there is no DT present, the kernel will try to use ACPI tables, but only if they are present. -In neither is available, the kernel will not boot. If acpi=force is used +If neither is available, the kernel will not boot. If acpi=force is used on the command line, the kernel will attempt to use ACPI tables first, but fall back to DT if there are no ACPI tables present. The basic idea is that the kernel will not fail to boot unless it absolutely has no other choice. -- 2.34.1
