Hi Francesco,
On Wed, Nov 29, 2023 at 8:29 AM Francesco Dolcini <francesco@xxxxxxxxxx> wrote:
> On Sat, Nov 25, 2023 at 07:44:22PM +0100, Krzysztof Kozlowski wrote:
> > Document preferred coding style for Devicetree sources (DTS and DTSI),
> > to bring consistency among all (sub)architectures and ease in reviews.
>
> Thank Krzysztof, we had most of this collected as BKM in some internal
> documents and it's great to see the effort to consolidate this and add
> it to the kernel documentation.
>
> > ---
> > +Following order of properties in device nodes is preferred:
> > +
> > +1. compatible
> > +2. reg
> > +3. ranges
> > +4. Standard/common properties (defined by common bindings, e.g. without
> > + vendor-prefixes)
> > +5. Vendor-specific properties
> > +6. status (if applicable)
> > +7. Child nodes, where each node is preceded with a blank line
>
> On point 4, do you have a more explicit way to define what is an actual
> standard/common property? You mention the vendor-prefixes as an example,
> is this just an example or this is the whole definition?
I think there are three classes of standard properties:
1. Device Tree Specification (from devicetree.org)
2. dt-schema
3. Common subsystem bindings (Documentation/devicetree/bindings/)
(may be moved to 2).
> What would be the order for this for example (from an existing DTS file)?
>
> reg_sdhc1_vmmc: regulator-sdhci1 {
> compatible = "regulator-fixed";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_sd1_pwr_en>;
> enable-active-high;
> gpio = <&main_gpio0 29 GPIO_ACTIVE_HIGH>;
> off-on-delay-us = <100000>;
> regulator-max-microvolt = <3300000>;
> regulator-min-microvolt = <3300000>;
> regulator-name = "+V3.3_SD";
> startup-delay-us = <2000>;
> };
>
> I guess the point that is not obvious to me here is where do we want
> pinctrl. I like it at position between 3 and 4, the rationale is that is
> a very frequent property and this way it will be in a similar place for
> every node.
The pinctrl properties are only present in board DTS files, not in
SoC DTSi files. There are two classes of them:
1. Extension of on-SoC devices, where they are added to already
existing nodes, defined in the SoC DTSi files, e.g. (from the same
existing DTS file):
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1>;
status = "disabled";
};
2. Pure board devices, in new nodes (e.g. your regulator example).
These are less common, so I don't even know from the top of my
mind when I last added one, and where ;-)
I'd guess after all standard properties?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
