Re: [PATCH V2] regulator: core: add support for configuring turn-on time through constraints

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 11 September 2013 10:47 PM, Stephen Warren wrote:
On 09/11/2013 06:58 AM, Laxman Dewangan wrote:
The Turn-on time of the regulator depends on the regulator device's
electrical characteristics. Sometimes regulator turn-on time also
depends on the capacitive load on the given platform and it can be
more than the datasheet value.

The driver provides the enable-time as per datasheet.

Add support for configure the enable ramp time through regulator
constraints so that regulator core can take this value for enable
time for that regulator.
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
  - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
    For hardwares which support disabling ramp rate, it should be explicitly
    intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
+- regulator-enable-ramp-delay: Turn-on time for regulator(in uSec). This is
+  the time time taken to reach within some proportion of the target voltage
+  from off state.
This is still a bit unclear. What proportion of the target voltage?
There's no mention that this describes the delay due to the
board/environment rather than the delay due to the internal operation of
the regulator itself. How about:

- regulator-enable-ramp-delay: The time taken, in uSec, for the supply
rail to reach the target voltage, plus/minus whatever tolerance the
board design requires, once the regulator output itself has ramped up.
This value is in addition to whatever built-in ramp time is inherent in
the regulator's own internal design or configuration. This property
describes the additional ramp time required due to board design issues
such as trace capacitance and load on the supply.

That's text repeats "additional" a bit, but I think describes the
situation correctly?

I wanted to provide the absolute delay rather than additional delay on top of inherit delay from device.

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux