On 11/15/2023 10:31 PM, Conor Dooley wrote:
On Wed, Nov 15, 2023 at 10:06:26PM +0800, Luo Jie wrote:
From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
10G-QXGMII is a MAC-to-PHY interface defined by the USXGMII multiport
specification. It uses the same signaling as USXGMII, but it multiplexes
4 ports over the link, resulting in a maximum speed of 2.5G per port.
Some in-tree SoCs like the NXP LS1028A use "usxgmii" when they mean
either the single-port USXGMII or the quad-port 10G-QXGMII variant, and
they could get away just fine with that thus far. But there is a need to
distinguish between the 2 as far as SerDes drivers are concerned.
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
---
.../devicetree/bindings/net/ethernet-controller.yaml | 1 +
I know it is one line, but bindings need to be in their own patches
please.
Ok, will split the binding change out as a separate patch.
Thanks Conor for the suggestion.
