Added 'mask' parameter to the shutdown_write() function. Now it can either write or update bits, depending on the value of mask. This is needed, because for alarms a write is necessary, but for resolution only the resolution bits should be updated. Signed-off-by: Daniel Matyas <daniel.matyas@xxxxxxxxxx> --- v4 -> v6: No change. v4: Added patch. drivers/hwmon/max31827.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c index 738ce5ca6e39..41e4f716605a 100644 --- a/drivers/hwmon/max31827.c +++ b/drivers/hwmon/max31827.c @@ -80,7 +80,7 @@ static const struct regmap_config max31827_regmap = { }; static int shutdown_write(struct max31827_state *st, unsigned int reg, - unsigned int val) + unsigned int mask, unsigned int val) { unsigned int cfg; unsigned int cnv_rate; @@ -97,7 +97,10 @@ static int shutdown_write(struct max31827_state *st, unsigned int reg, mutex_lock(&st->lock); if (!st->enable) { - ret = regmap_write(st->regmap, reg, val); + if (!mask) + ret = regmap_write(st->regmap, reg, val); + else + ret = regmap_update_bits(st->regmap, reg, mask, val); goto unlock; } @@ -112,7 +115,11 @@ static int shutdown_write(struct max31827_state *st, unsigned int reg, if (ret) goto unlock; - ret = regmap_write(st->regmap, reg, val); + if (!mask) + ret = regmap_write(st->regmap, reg, val); + else + ret = regmap_update_bits(st->regmap, reg, mask, val); + if (ret) goto unlock; @@ -130,7 +137,7 @@ static int write_alarm_val(struct max31827_state *st, unsigned int reg, { val = MAX31827_M_DGR_TO_16_BIT(val); - return shutdown_write(st, reg, val); + return shutdown_write(st, reg, 0, val); } static umode_t max31827_is_visible(const void *state, -- 2.34.1