Re: [PATCH net-next v2 2/9] net: ethernet: oa_tc6: implement mac-phy software reset

[<Parthiban.Veerasooran@xxxxxxxxxxxxx>]

Hi Andrew,

On 24/10/23 4:13 am, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
>> +     ret = oa_tc6_perform_ctrl(tc6, RESET, &regval, 1, true, true);
>> +     ret = oa_tc6_perform_ctrl(tc6, RESET, &regval, 1, true, false);
> 
> Just looking at this, it is not clear what these true/false mean. Maybe add some #defines
> 
> #define TC6_READ true
> #define TC6_WRITE false
> #define TC6_PROTECTED true
> #define TC6_UNPROTECTED false
Sure will do this.
> 
>> +     if (ret)
>> +             return ret;
>> +
>> +     /* The chip completes a reset in 3us, we might get here earlier than
>> +      * that, as an added margin we'll conditionally sleep 5us.
>> +      */
>> +     udelay(5);
>> +
>> +     ret = oa_tc6_perform_ctrl(tc6, STATUS0, &regval, 1, false, false);
>> +     if (ret)
>> +             return ret;
>> +
>> +     /* Check for reset complete interrupt status */
>> +     if (regval & RESETC) {
>> +             regval = RESETC;
> 
> People don't always agree, but i found STATUS0_RESETC easier to see
> you have the correct bit for the register you just read.
Do you want me to define STATUS0_RESETC instead of RESETC or is my 
understanding is wrong?

Best Regards,
Parthiban V
> 
>          Andrew