Should have at least something w/regards to a commit message.
On Aug 20, 2013, at 10:07 PM, Xiubo Li wrote:
> Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/pwm/fsl-ftm-pwm.txt | 52 ++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
>
> diff --git a/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt b/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
> new file mode 100644
> index 0000000..698965b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
> @@ -0,0 +1,52 @@
> +Freescale FTM PWM controller
> +
> +Required properties:
> +- compatible: should be "fsl,vf610-ftm-pwm"
> +- reg: physical base address and length of the controller's registers
> +- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
> + First cell specifies the per-chip channel index of the PWM to use, the
> + second cell is the period in nanoseconds and bit 0 in the third cell is
> + used to encode the polarity of PWM output. Set bit 0 of the third in PWM
> + specifier to 1 for inverse polarity & set to 0 for normal polarity.
> +- fsl,pwm-clk-ps: the ftm0 pwm clock's prescaler, divide-by 2^n(n = 0 ~ 7).
> +- fsl,pwm-cpwm: Center-Aligned PWM (CPWM) mode.
Should describe this in more detail, what does the value actually mean for what modes there are?
> +- fsl,pwm-number: the number of PWM devices, and is must equal to the number
> + of "fsl,pwm-channels".
If they must be equal why do we need both?
> +- fsl,pwm-channels: the channels' order which is be used for pwm in ftm0
> + module, and they must be one or some of 0 ~ 7, because the ftm0 only has
> + 8 channels can be used.
> +- for very channel, the revlatived the pinctrl should be at least two state
revlatived?
> + {"enN", "dsN"}, which "en" means "enable", "ds" means "disable" and "N"
> + means the order of the channel.
> +
> +Example:
> +
> +pwm0: pwm@40038000 {
> + compatible = "fsl,vf610-ftm-pwm";
> + reg = <0x40038000 0x1000>;
> + #pwm-cells = <3>;
> + pinctrl-names = "en0", "ds0", "en3", "ds3";
> + pinctrl-0 = <&pinctrl_pwm0_ch0_en>;
> + pinctrl-1 = <&pinctrl_pwm0_ch0_ds>;
> + pinctrl-2 = <&pinctrl_pwm0_ch3_en>;
> + pinctrl-3 = <&pinctrl_pwm0_ch3_ds>;
> + fsl,pwm-clk-ps = <7>;
> + fsl,pwm-cpwm = <0>;
> + fsl,pwm-number = <2>;
> + fsl,pwm-channels = <0 3>;
> + ...
> + };
> +
> +leds {
> + compatible = "pwm-leds";
> + led {
> + label = "fsl_led";
> + pwms = <&pwm0 0 10000000 0>;
> + max-brightness = <127>;
> + };
> + backlight {
> + label = "fsl_backlight";
> + pwms = <&pwm0 3 10000000 1>;
> + max-brightness = <100>;
> + };
> +};
> --
> 1.8.0
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
