On Tue, Oct 17, 2023 at 4:35 PM Saravana Kannan <saravanak@xxxxxxxxxx> wrote: > > On Sat, Oct 14, 2023 at 9:17 AM Uwe Kleine-König > <u.kleine-koenig@xxxxxxxxxxxxxx> wrote: > > > > On Fri, Oct 13, 2023 at 02:42:20PM -0700, Saravana Kannan wrote: > > > On Tue, Oct 10, 2023 at 1:05 AM Uwe Kleine-König > > > <u.kleine-koenig@xxxxxxxxxxxxxx> wrote: > > > > > > > > Hello Saravana, > > > > > > > > you were pointed out to me as the expert for device links. I found a > > > > problem with these. > > > > > > > > On Tue, Jul 25, 2023 at 11:10:04PM +0200, Uwe Kleine-König wrote: > > > > > Today I managed to trigger the problem I intend to address with this > > > > > series. My machine to test this on is an stm32mp157. To be able to > > > > > trigger the problem reliably I applied the following patches on top of > > > > > v6.5-rc1: > > > > > > > > > > - pwm: stm32: Don't modify HW state in .remove() callback > > > > > This is a cleanup that I already sent out. > > > > > https://lore.kernel.org/r/20230713155142.2454010-2-u.kleine-koenig@xxxxxxxxxxxxxx > > > > > The purpose for reproducing the problem is to not trigger further > > > > > calls to the apply callback. > > > > > > > > > > - The following patch: > > > > > > > > > > diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c > > > > > index 687967d3265f..c7fc02b0fa3c 100644 > > > > > --- a/drivers/pwm/pwm-stm32.c > > > > > +++ b/drivers/pwm/pwm-stm32.c > > > > > @@ -451,6 +451,10 @@ static int stm32_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, > > > > > struct stm32_pwm *priv = to_stm32_pwm_dev(chip); > > > > > int ret; > > > > > > > > > > + dev_info(chip->dev, "%s:%d\n", __func__, __LINE__); > > > > > + msleep(5000); > > > > > + dev_info(chip->dev, "%s:%d\n", __func__, __LINE__); > > > > > + > > > > > enabled = pwm->state.enabled; > > > > > > > > > > if (enabled && !state->enabled) { > > > > > @@ -650,7 +654,11 @@ static void stm32_pwm_remove(struct platform_device *pdev) > > > > > { > > > > > struct stm32_pwm *priv = platform_get_drvdata(pdev); > > > > > > > > > > + dev_info(&pdev->dev, "%s:%d\n", __func__, __LINE__); > > > > > pwmchip_remove(&priv->chip); > > > > > + dev_info(&pdev->dev, "%s:%d\n", __func__, __LINE__); > > > > > + > > > > > + priv->regmap = NULL; > > > > > } > > > > > > > > > > static int __maybe_unused stm32_pwm_suspend(struct device *dev) > > > > > > > > > > The first hunk is only there to widen the race window. The second is to > > > > > give some diagnostics and make stm32_pwm_apply() crash if it continues > > > > > to run after the msleep. (Without it it didn't crash reproducibly, don't > > > > > understand why. *shrug*) > > > > > > > > > > The device tree contains a pwm-fan device making use of one of the PWMs. > > > > > > > > > > Now I do the following: > > > > > > > > > > echo fan > /sys/bus/platform/drivers/pwm-fan/unbind & sleep 1; echo 40007000.timer:pwm > /sys/bus/platform/drivers/stm32-pwm/unbind > > > > > > > > > > Unbinding the fan device has two effects: > > > > > > > > > > - The device link between fan and pwm looses its property to unbind fan > > > > > when pwm gets unbound. > > > > > (Its .status changes from DL_STATE_ACTIVE to DL_STATE_AVAILABLE) > > > > > - It calls pwm_fan_cleanup() which triggers a call to > > > > > pwm_apply_state(). > > > > > > > > > > So when the pwm device gets unbound the first thread is sleeping in > > > > > stm32_pwm_apply(). The driver calls pwmchip_remove() and sets > > > > > priv->regmap to NULL. Then a few seconds later the first thread wakes up > > > > > in stm32_pwm_apply() with the chip freed and priv->regmap = NULL. Bang! > > > > > > > > > > This looks as follows: > > > > > > > > > > root@crown:~# echo fan > /sys/bus/platform/drivers/pwm-fan/unbind & sleep 1; echo 40007000.timer:pwm > /sys/bus/platform/drivers/stm32-pwm/unbind > > > > > [ 187.182113] stm32-pwm 40007000.timer:pwm: stm32_pwm_apply:454 > > > > > [ 188.164769] stm32-pwm 40007000.timer:pwm: stm32_pwm_remove:657 > > > > > [ 188.184555] stm32-pwm 40007000.timer:pwm: stm32_pwm_remove:659 > > > > > root@crown:~# [ 192.236423] platform 40007000.timer:pwm: stm32_pwm_apply:456 > > > > > [ 192.240727] 8<--- cut here --- > > > > > [ 192.243759] Unable to handle kernel NULL pointer dereference at virtual address 0000001c when read > > > > > ... > > > > > > > > > > Even without the crash you can see that stm32_pwm_apply() is still > > > > > running after pwmchip_remove() completed. > > > > > > > > > > I'm unsure if the device link could be improved here to ensure that the > > > > > fan is completely unbound even if it started unbinding already before > > > > > the pwm device gets unbound. (And if it could, would this fit the device > > > > > links purpose and so be a sensible improvement?) > > > > > > > > While I think that there is something to be done in the pwm core that > > > > this doesn't explode (i.e. do proper lifetime tracking such that a > > > > pwm_chip doesn't disappear while still being used---and I'm working on > > > > that) I expected that the device links between pwm consumer and provider > > > > would prevent the above described oops, too. But somehow the fan already > > > > going away (but still using the PWM) when the PWM is unbound, results in > > > > the PWM disappearing before the fan is completely gone. > > > > > > > > Is this expected, or a problem that can (and should?) be fixed? > > > > > > I didn't read your full series, but I read this email. With what's in > > > this email, the problem seems to be in the driver or the pwm > > > framework. The pwm driver/framework can't tell the driver core that > > > you successfully unbound (returning from .remove()) before you have > > > finish all your ongoing transactions with the device. If your > > > "apply()" is still running, you need to make sure it's complete before > > > .remove() does any resource releasing/clean up. > > > > > > Also, how is the consumer driver's .remove() succeeding if it has an > > > ongoing pwm call()? > > > > The thing that works fine and as expected is: > > > > - trigger unbind of PWM device via sysfs > > > > Because there is a device link PWM provider -> pwm consumer (fan), the > > fan is removed and once its gone (and not earlier), the PWM gets unbound. > > > > The failing sequence is: > > > > - trigger unbind of fan device in userspace thread A via sysfs. The > > fan's remove callback blocks for 5s in pwm_apply_state() and so > > .remove() doesn't complete yet. > > > > - a second later: trigger unbind of PWM device via sysfs in thread B. > > As before I'd expect that the device link results in waiting for the > > fan to be removed completely, but the PWM is removed immediately. > > > > - pwm_apply_state's sleep completes (in thread B) and operates on freed > > resources => bang! > > > > > This all sounds like insufficient locking and > > > critical region protection in both the consumer and supplier. > > > > My (and I think also Thierry's) expectation was, that the device link > > provides the needed synchronisation. But it doesn't as it doesn't block > > the PWM provider going away until the fan is completely gone. > > > > > Device links can't do anything here because you are giving it wrong > > > info -- that the unbind was successful before it actually is. > > > > The fan's unbind is ongoing, but not complete yet and I'd expect that > > the device link blocks unbinding the PWM until the fan is completely > > gone. So I think there is no wrong information. > > > > > Device links will and can make sure that the consumer is unbound > > > successfully before the unbind is called on the supplier. And it looks > > > like that's still true here. > > > > I hope you understood the situation better now and see the problem we > > have. > > > > The problem is fixable in the pwm framework (and I'm working on that), > > but I think there is also something to improve around devicelink > > handling. > > Thanks for a better explanation of the issue. I agree, this seems like > something device links should be able to take care of. > > I'll take a look into this. Took me a while to debug this because I couldn't find the .remove() function and I was very confused about what's going on. I'm guessing you started hitting this issue only after moving to the devm_ variant of the pwm APIs. I think I have a fix. https://lore.kernel.org/lkml/20231018013851.3303928-1-saravanak@xxxxxxxxxx/T/#u I didn't even compile test it, but it's a trivial change. Can you please test it out and give your "tested-by" if it fixes your issue? Thanks, Saravana
