On 29/08/13 10:11, Sean Young wrote:
> On Wed, Aug 28, 2013 at 04:33:50PM +0100, Srinivas KANDAGATLA wrote:
>> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
>>
>> This patch adds support to ST RC driver, which is basically a IR/UHF
>> receiver and transmitter. This IP (IRB) is common across all the ST
>> parts for settop box platforms. IRB is embedded in ST COMMS IP block.
>> It supports both Rx & Tx functionality.
>>
>> In this driver adds only Rx functionality via LIRC codec.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
>> ---
>> Hi Chehab,
>>
>> This is a very simple rc driver for IRB controller found in STi ARM CA9 SOCs.
>> STi ARM SOC support went in 3.11 recently.
>> This driver is a raw driver which feeds data to lirc codec for the user lircd
>> to decode the keys.
>>
>> This patch is based on git://linuxtv.org/media_tree.git master branch.
>>
>> Changes since v1:
>> - Device tree bindings cleaned up as suggested by Mark and Pawel
>> - use ir_raw_event_reset under overflow conditions as suggested by Sean.
>> - call ir_raw_event_handle in interrupt handler as suggested by Sean.
>> - correct allowed_protos flag with RC_BIT_ types as suggested by Sean.
>> - timeout and rx resolution added as suggested by Sean.
>
> Acked-by: Sean Young <sean@xxxxxxxx>
Thankyou Sean for the Ack.
>
> Note minor nitpicks below.
>>
>> Thanks,
>> srini
>>
>> Documentation/devicetree/bindings/media/st-rc.txt | 24 ++
>> drivers/media/rc/Kconfig | 10 +
>> drivers/media/rc/Makefile | 1 +
>> drivers/media/rc/st_rc.c | 392 +++++++++++++++++++++
>> 4 files changed, 427 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/media/st-rc.txt
>> create mode 100644 drivers/media/rc/st_rc.c
>>
>> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
>> index 11e84bc..bf301ed 100644
>> --- a/drivers/media/rc/Kconfig
>> +++ b/drivers/media/rc/Kconfig
>> @@ -322,4 +322,14 @@ config IR_GPIO_CIR
>> To compile this driver as a module, choose M here: the module will
>> be called gpio-ir-recv.
>>
>> +config RC_ST
>> + tristate "ST remote control receiver"
>> + depends on ARCH_STI && LIRC && OF
>
> Minor nitpick, this should not depend on LIRC, it depends on RC_CORE.
Yes, I will make it depend on RC_CORE, remove OF as suggested by Mauro
CC and select LIRC to something like.
depends on ARCH_STI && RC_CORE
select LIRC
>> +static int st_rc_probe(struct platform_device *pdev)
>> +{
>> + int ret = -EINVAL;
>> + struct rc_dev *rdev;
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + struct st_rc_device *rc_dev;
>> + struct device_node *np = pdev->dev.of_node;
>> + const char *rx_mode;
>> +
>> + rc_dev = devm_kzalloc(dev, sizeof(struct st_rc_device), GFP_KERNEL);
>> + rdev = rc_allocate_device();
>> +
>> + if (!rc_dev || !rdev)
>> + return -ENOMEM;
>
> If one fails and the other succeeds you have a leak.
Yes... I will fix it in v3.
>
>> +
>> + if (np && !of_property_read_string(np, "rx-mode", &rx_mode)) {
>> +
[...]
>> +static SIMPLE_DEV_PM_OPS(st_rc_pm_ops, st_rc_suspend, st_rc_resume);
>> +#endif
>> +
>> +#ifdef CONFIG_OF
>
> Since this depends on OF it will always be defined.
Removed OF dependency in Kconfig.
>> +module_platform_driver(st_rc_driver);
>> +
>> +MODULE_DESCRIPTION("RC Transceiver driver for STMicroelectronics platforms");
>> +MODULE_AUTHOR("STMicroelectronics (R&D) Ltd");
>> +MODULE_LICENSE("GPL");
>> --
>> 1.7.6.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
