[PATCH v12 01/10] x86/resctrl: Add multiple tasks to the resctrl group at once

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The resctrl task assignment for monitor or control group needs to be
done one at a time. For example:

  $mount -t resctrl resctrl /sys/fs/resctrl/
  $mkdir /sys/fs/resctrl/ctrl_grp1
  $echo 123 > /sys/fs/resctrl/ctrl_grp1/tasks
  $echo 456 > /sys/fs/resctrl/ctrl_grp1/tasks
  $echo 789 > /sys/fs/resctrl/ctrl_grp1/tasks

This is not user-friendly when dealing with hundreds of tasks.

Support multiple task assignment in one command with tasks ids separated
by commas. For example:
  $echo 123,456,789 > /sys/fs/resctrl/ctrl_grp1/tasks

Signed-off-by: Babu Moger <babu.moger@xxxxxxx>
Tested-by: Peter Newman <peternewman@xxxxxxxxxx>
Reviewed-by: Peter Newman <peternewman@xxxxxxxxxx>
Tested-by: Tan Shaopeng <tan.shaopeng@xxxxxxxxxxxxxx>
Reviewed-by: Tan Shaopeng <tan.shaopeng@xxxxxxxxxxxxxx>
Reviewed-by: Fenghua Yu <fenghua.yu@xxxxxxxxx>
Reviewed-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
v12: No changes
---
 Documentation/arch/x86/resctrl.rst     |  9 ++++++++-
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 25 ++++++++++++++++++++++---
 2 files changed, 30 insertions(+), 4 deletions(-)

diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst
index cb05d90111b4..8154e9975d1e 100644
--- a/Documentation/arch/x86/resctrl.rst
+++ b/Documentation/arch/x86/resctrl.rst
@@ -299,7 +299,14 @@ All groups contain the following files:
 "tasks":
 	Reading this file shows the list of all tasks that belong to
 	this group. Writing a task id to the file will add a task to the
-	group. If the group is a CTRL_MON group the task is removed from
+	group. Multiple tasks can be added by separating the task ids
+	with commas. Tasks will be assigned sequentially. Multiple
+	failures are not supported. A single failure encountered while
+	attempting to assign a task will cause the operation to abort and
+	already added tasks before the failure will remain in the group.
+	Failures will be logged to /sys/fs/resctrl/info/last_cmd_status.
+
+	If the group is a CTRL_MON group the task is removed from
 	whichever previous CTRL_MON group owned the task and also from
 	any MON group that owned the task. If the group is a MON group,
 	then the task must already belong to the CTRL_MON parent of this
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 725344048f85..f0d163950969 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -696,11 +696,10 @@ static ssize_t rdtgroup_tasks_write(struct kernfs_open_file *of,
 				    char *buf, size_t nbytes, loff_t off)
 {
 	struct rdtgroup *rdtgrp;
+	char *pid_str;
 	int ret = 0;
 	pid_t pid;
 
-	if (kstrtoint(strstrip(buf), 0, &pid) || pid < 0)
-		return -EINVAL;
 	rdtgrp = rdtgroup_kn_lock_live(of->kn);
 	if (!rdtgrp) {
 		rdtgroup_kn_unlock(of->kn);
@@ -715,7 +714,27 @@ static ssize_t rdtgroup_tasks_write(struct kernfs_open_file *of,
 		goto unlock;
 	}
 
-	ret = rdtgroup_move_task(pid, rdtgrp, of);
+	while (buf && buf[0] != '\0' && buf[0] != '\n') {
+		pid_str = strim(strsep(&buf, ","));
+
+		if (kstrtoint(pid_str, 0, &pid)) {
+			rdt_last_cmd_printf("Task list parsing error pid %s\n", pid_str);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (pid < 0) {
+			rdt_last_cmd_printf("Invalid pid %d\n", pid);
+			ret = -EINVAL;
+			break;
+		}
+
+		ret = rdtgroup_move_task(pid, rdtgrp, of);
+		if (ret) {
+			rdt_last_cmd_printf("Error while processing task %d\n", pid);
+			break;
+		}
+	}
 
 unlock:
 	rdtgroup_kn_unlock(of->kn);
-- 
2.34.1





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux