On 08/28/13 14:14, Jason Cooper wrote:
On Wed, Aug 28, 2013 at 02:14:33AM +0200, Sebastian Hesselbarth wrote:This adds very basic device tree files for the Marvell Armada 1500 SoC (88DE3100) and the Sony NSZ-GS7 GoogleTV board. Currently, SoC only has nodes for cpus, some clocks, l2 cache controller, local timer, apb timers, uart, and interrupt controllers. The Sony NSZ-GS7 is a GoogleTV consumer device comprising the Armada 1500 SoC above. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> --- Changelog: v1->v2: - add binding documentation (Reported by Jason Cooper) - change l2cc from aurora to tauros3 (Reported by Thomas Petazzoni) - add copyright reference - adapt compatibles to mach-berlin instead of mach-mvebu Cc: Jason Cooper <jason@xxxxxxxxxxxxxx> Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> Cc: Arnd Bergmann <arnd@xxxxxxxx> Cc: Russell King <linux@xxxxxxxxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-doc@xxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx --- .../devicetree/bindings/arm/marvell,berlin.txt | 23 ++ arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts | 29 +++ arch/arm/boot/dts/mv88de3100.dtsi | 222 ++++++++++++++++++++ 4 files changed, 276 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/marvell,berlin.txt create mode 100644 arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts create mode 100644 arch/arm/boot/dts/mv88de3100.dtsi diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt new file mode 100644 index 0000000..a4c3056 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -0,0 +1,23 @@ +Marvell Berlin (88DE3xxx) family SoCs Device Tree Bindings +--------------------------------------------------------------- + +Boards with a SoC of the Marvell Berlin (88DE3xxx) family, e.g. Armada 1500 +shall have the following properties: + +* Required root node properties: +compatible: must contain "marvell,berlin" + +In addition, the above compatible shall be extended with the specific +SoC used, i.e. + "marvell,88de3100" for Marvell 88DE3100 (Armada 1500), + "marvell,88de3010" for Marvell 88DE3010 (Armada 1000), + "marvell,88de3005" for Marvell 88DE3005 (Armada 1500-mini) + +* Example: + +/ { + model = "Sony NSZ-GS7"; + compatible = "marvell,88de3100", "marvell,berlin";I would make this: compatible = "sony,nsz-gs7", "marvell,88de3100", "marvell,berlin";
Ok.
+ + ... +} diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d45058e..2989b51 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -43,6 +43,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb +dtb-$(CONFIG_ARCH_BERLIN) += \ + mv88de3100-sony-nsz-gs7.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ diff --git a/arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts b/arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts new file mode 100644 index 0000000..1081bc1 --- /dev/null +++ b/arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts @@ -0,0 +1,29 @@ +/* + * Device Tree file for Sony NSZ-GS7 + * + * Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "mv88de3100.dtsi" + +/ { + model = "Sony NSZ-GS7"; + compatible = "sony,nsz-gs7", "marvell,88de3100", "marvell,berlin"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk verbose debug";I would remove 'verbose debug' before official submission, no point to defaulting to log-spammer.
Agree. Maybe, for the next patches, I'll add some I/O device drivers that allow you to actually boot into some rootfs. All those fooHCI IP shouldn't be that hard - hopefully some quirks only. I also had a look at I2C and SPI, both DW IP with mainline drivers available. SPI needs a little DT tweaking and I did not carry out any functional tests, yet. Thanks for the constant reviews! Sebastian -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
