Tue, Oct 03, 2023 at 01:03:00AM CEST, arkadiusz.kubalewski@xxxxxxxxx wrote:
>>From: Jiri Pirko <jiri@xxxxxxxxxxx>
>>Sent: Monday, October 2, 2023 5:04 PM
>>
>>Mon, Oct 02, 2023 at 04:32:30PM CEST, arkadiusz.kubalewski@xxxxxxxxx wrote:
>>>>From: Vadim Fedorenko <vadim.fedorenko@xxxxxxxxx>
>>>>Sent: Wednesday, September 27, 2023 8:09 PM
>>>>
>>>>On 27/09/2023 10:24, Arkadiusz Kubalewski wrote:
>>>>> Add callback op (get) for pin-dpll phase-offset measurment.
>>>>> Add callback ops (get/set) for pin signal phase adjustment.
>>>>> Add min and max phase adjustment values to pin proprties.
>>>>> Invoke get callbacks when filling up the pin details to provide user
>>>>> with phase related attribute values.
>>>>> Invoke phase-adjust set callback when phase-adjust value is provided
>>>>> for
>>>>> pin-set request.
>>>>>
>>>>> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@xxxxxxxxx>
>>>>
>>>>[...]
>>>>
>>>>> +static int
>>>>> +dpll_pin_phase_adj_set(struct dpll_pin *pin, struct nlattr
>>>>> *phase_adj_attr,
>>>>> + struct netlink_ext_ack *extack)
>>>>> +{
>>>>> + struct dpll_pin_ref *ref;
>>>>> + unsigned long i;
>>>>> + s32 phase_adj;
>>>>> + int ret;
>>>>> +
>>>>> + phase_adj = nla_get_s32(phase_adj_attr);
>>>>> + if (phase_adj > pin->prop->phase_range.max ||
>>>>> + phase_adj < pin->prop->phase_range.min) {
>>>>> + NL_SET_ERR_MSG(extack, "phase adjust value not supported");
>>>>> + return -EINVAL;
>>>>> + }
>>>>> + xa_for_each(&pin->dpll_refs, i, ref) {
>>>>> + const struct dpll_pin_ops *ops = dpll_pin_ops(ref);
>>>>> + struct dpll_device *dpll = ref->dpll;
>>>>> +
>>>>> + if (!ops->phase_adjust_set)
>>>>> + return -EOPNOTSUPP;
>>>>
>>>>I'm thinking about this part. We can potentially have dpll devices with
>>>>different expectations on phase adjustments, right? And if one of them
>>>>won't be able to adjust phase (or will fail in the next line), then
>>>>netlink will return EOPNOTSUPP while _some_ of the devices will be
>>>>adjusted. Doesn't look great. Can we think about different way to apply
>>>>the change?
>>>>
>>>
>>>Well makes sense to me.
>>>
>>>Does following makes sense as a fix?
>>>We would call op for all devices which has been provided with the op.
>>>If device has no op -> add extack error, continue
>>
>>Is it real to expect some of the device support this and others don't?
>>Is it true for ice?
>>If not, I would got for all-or-nothing here.
>>
>
>Let's step back a bit.
>The op itself is introduced as per pin-dpll tuple.. did this intentionally,
>to inform each dpll that the offset has been changed - in case dplls are
>controlled by separated driver/firmware instances but still sharing the pin.
>Same way a pin frequency is being set, from user perspective on a pin, but
>callback is called for each dpll the pin was registered with.
>Whatever we do here, it shall be probably done for frequency_set() callback as
>well.
>
>The answers:
>So far I don't know the device that might do it this way, it rather supports
>phase_adjust or not. In theory we allow such behavior to be implemented, i.e.
>pin is registered with 2 dplls, one has the callback, second not.
If there is only theoretical device like that now, implement
all-or-nothing. If such theoretical device appears in real, this could
be changed. The UAPI would not change, no problem.
>Current hardware of ice sets phase offset for a pin no matter on which dpll
>device callback was invoked.
>"all-or-nothing" - do you mean to check all callback returns and then decide
>if it was successful?
Check if all dplls have ops and only perform the action in such case. In
case one of the dplls does not have the op filled, return -EOPNOTSUPP.
Regarding the successful/failed op, I think you can just return. In
these cases, when user performs multiaction cmd, he should be prepared
to deal with consequences if part of this cmd fails. We don't have
rollback for any other multiaction cmd in dpll, I don't see why this
should be treated differently.
>
>Thank you!
>Arkadiusz
>
>>
>>>If device fails to set -> add extack error, continue
>>>Function always returns 0.
>>>
>>>Thank you!
>>>Arkadiusz
>>>
>>>>
>>>>> + ret = ops->phase_adjust_set(pin,
>>>>> + dpll_pin_on_dpll_priv(dpll, pin),
>>>>> + dpll, dpll_priv(dpll), phase_adj,
>>>>> + extack);
>>>>> + if (ret)
>>>>> + return ret;
>>>>> + }
>>>>> + __dpll_pin_change_ntf(pin);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>
