Intel Sub-NUMA Cluster (SNC) is a feature that subdivides the CPU cores and memory controllers on a socket into two or more groups. These are presented to the operating system as NUMA nodes. This may enable some workloads to have slightly lower latency to memory as the memory controller(s) in an SNC node are electrically closer to the CPU cores on that SNC node. This cost may be offset by lower bandwidth since the memory accesses for each core can only be interleaved between the memory controllers on the same SNC node. Resctrl monitoring on Intel system depends upon attaching RMIDs to tasks to track L3 cache occupancy and memory bandwidth. There is an MSR that controls how the RMIDs are shared between SNC nodes. The default mode divides them numerically. E.g. when there are two SNC nodes on a socket the lower number half of the RMIDs are given to the first node, the remainder to the second node. This would be difficult to use with the Linux resctrl interface as specific RMID values assigned to resctrl groups are not visible to users. The other mode divides the RMIDs and renumbers the ones on the second SNC node to start from zero. Even with this redumbering SNC mode requires several changes in resctrl behavior for correct operation. Add a global integer "snc_nodes_per_l3_cache" that will show how many SNC nodes share each L3 cache. When this is "1", SNC mode is either not implemented, or not enabled. A later patch will detect SNC mode and set snc_nodes_per_l3_cache to the appropriate value. For now it remains at the default "1" to indicate SNC mode is not active. Code that needs to take action when SNC is enabled is: 1) The number of logical RMIDs per L3 cache available for use is the number of physical RMIDs divided by the number of SNC nodes. 2) Likewise the "mon_scale" value must be adjusted for the number of SNC nodes. 3) The RMID renumbering operates when using the value from the IA32_PQR_ASSOC MSR to count accesses by a task. When reading an RMID counter, code must adjust from the logical RMID used to the physical RMID value for the SNC node that it wishes to read and load the adjusted value into the IA32_QM_EVTSEL MSR. 4) The L3 cache is divided between the SNC nodes. So the value reported in the resctrl "size" file is adjusted. 5) The "-o mba_MBps" mount option must be disabled in SNC mode because the monitoring is being done per SNC node, while the bandwidth allocation is still done at the L3 cache scope. Trying to use this feedback loop might result in contradictory changes to the throttling level coming from each of the SNC node bandwidth measurements. Signed-off-by: Tony Luck <tony.luck@xxxxxxxxx> --- Changes since v5: Major overhaul to the commit message. Starts with high level overview of what SNC is, before going into details on changes needed. Begin with definiton of the SNC acronym. Clarify in point "1" that available RMIDs are per L3 cache. Add extra detail in "5" why mba_MBps is incompatible with SNC mode. Code changes: Reformat a comment to use longer lines. Added a period at end of sentence for a comment. --- arch/x86/kernel/cpu/resctrl/internal.h | 2 ++ arch/x86/kernel/cpu/resctrl/core.c | 6 ++++++ arch/x86/kernel/cpu/resctrl/monitor.c | 16 +++++++++++++--- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 4 ++-- 4 files changed, 23 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h index ee38249c6f1d..0a17ace5811e 100644 --- a/arch/x86/kernel/cpu/resctrl/internal.h +++ b/arch/x86/kernel/cpu/resctrl/internal.h @@ -446,6 +446,8 @@ DECLARE_STATIC_KEY_FALSE(rdt_alloc_enable_key); extern struct dentry *debugfs_resctrl; +extern int snc_nodes_per_l3_cache; + enum resctrl_res_level { RDT_RESOURCE_L3, RDT_RESOURCE_L2, diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c index e61bf919ac78..1f94b7b11f3e 100644 --- a/arch/x86/kernel/cpu/resctrl/core.c +++ b/arch/x86/kernel/cpu/resctrl/core.c @@ -48,6 +48,12 @@ int max_name_width, max_data_width; */ bool rdt_alloc_capable; +/* + * Number of SNC nodes that share each L3 cache. Default is 1 for + * systems that do not support SNC, or have SNC disabled. + */ +int snc_nodes_per_l3_cache = 1; + static void mba_wrmsr_intel(struct rdt_ctrl_domain *d, struct msr_param *m, struct rdt_resource *r); diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c index 97d2ed829f5d..e6e566921a60 100644 --- a/arch/x86/kernel/cpu/resctrl/monitor.c +++ b/arch/x86/kernel/cpu/resctrl/monitor.c @@ -148,8 +148,18 @@ static inline struct rmid_entry *__rmid_entry(u32 rmid) static int __rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *val) { + struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl; + int cpu = smp_processor_id(); + int rmid_offset = 0; u64 msr_val; + /* + * When SNC mode is on, need to compute the offset to read the + * physical RMID counter for the node to which this CPU belongs. + */ + if (snc_nodes_per_l3_cache > 1) + rmid_offset = (cpu_to_node(cpu) % snc_nodes_per_l3_cache) * r->num_rmid; + /* * As per the SDM, when IA32_QM_EVTSEL.EvtID (bits 7:0) is configured * with a valid event code for supported resource type and the bits @@ -158,7 +168,7 @@ static int __rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *val) * IA32_QM_CTR.Error (bit 63) and IA32_QM_CTR.Unavailable (bit 62) * are error bits. */ - wrmsr(MSR_IA32_QM_EVTSEL, eventid, rmid); + wrmsr(MSR_IA32_QM_EVTSEL, eventid, rmid + rmid_offset); rdmsrl(MSR_IA32_QM_CTR, msr_val); if (msr_val & RMID_VAL_ERROR) @@ -783,8 +793,8 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r) int ret; resctrl_rmid_realloc_limit = boot_cpu_data.x86_cache_size * 1024; - hw_res->mon_scale = boot_cpu_data.x86_cache_occ_scale; - r->num_rmid = boot_cpu_data.x86_cache_max_rmid + 1; + hw_res->mon_scale = boot_cpu_data.x86_cache_occ_scale / snc_nodes_per_l3_cache; + r->num_rmid = (boot_cpu_data.x86_cache_max_rmid + 1) / snc_nodes_per_l3_cache; hw_res->mbm_width = MBM_CNTR_WIDTH_BASE; if (mbm_offset > 0 && mbm_offset <= MBM_CNTR_WIDTH_OFFSET_MAX) diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c index b0901fb95aa9..a5404c412f53 100644 --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c @@ -1357,7 +1357,7 @@ unsigned int rdtgroup_cbm_to_size(struct rdt_resource *r, } } - return size; + return size / snc_nodes_per_l3_cache; } /** @@ -2590,7 +2590,7 @@ static int rdt_parse_param(struct fs_context *fc, struct fs_parameter *param) ctx->enable_cdpl2 = true; return 0; case Opt_mba_mbps: - if (!supports_mba_mbps()) + if (!supports_mba_mbps() || snc_nodes_per_l3_cache > 1) return -EINVAL; ctx->enable_mba_mbps = true; return 0; -- 2.41.0