On 08/27/2013 01:42 AM, Nicolas Ferre wrote: > On 27/08/2013 08:16, boris brezillon : >> On 27/08/2013 05:55, Stephen Warren wrote: >>> On 08/26/2013 11:01 AM, boris brezillon wrote: >>>> Hello Stephen, >>>> >>>> On 26/08/2013 18:50, Stephen Warren wrote: >>>>> On 08/24/2013 03:35 PM, Boris BREZILLON wrote: >>>>>> Add a new parameter to support deglitch filter configuration. >>>>>> A deglitch filter works like a debounce filter but with a smaller >>>>>> delay (nanoseconds). >>>>> Why not use the existing debounce property, just with a small delay >>>>> specified. It seems like that's exactly what the property is for? >>>> That's one of the question I asked in my cover letter :-) >>>> >>>> Indeed the at91 deglitch filter delay is not configurable and is >>>> statically >>>> assigned to half a master clk cycle (if master clk = 133MHz -> 8 ns). >>>> The debounce property argument is currently expressed in usecs. >>>> >>>> This will result in always selecting the debounce filter (which is also >>>> available on at91 SoCs) over the deglitch filter. >>>> >>>> Could we add a flag in the deglitch argument to specify the delay unit >>>> (nsecs or usecs) ? >>> If the value is hard-coded in HW, why not use non-zero (or 1) to enable >>> and zero to disable? >> >> Indeed at91 pins support both deglitch and debounce filter and I have to >> choose >> between the two given the argument value (in usec). >> >> Here's what I can do: >> >> if (arg >= 1/2 * slowclock) /* debounce case */ >> /* choose debounce filter and configure the delay >> according to the given argument value */ >> else /* deglitch case */ >> /* choose deglitch filter */ >> >> >> Slow clock is running at 32KHz which gives a 30 usec clock cycle. > > I am not in favor for this kind of complicated heuristic. Deglitch and > Debounce filters are different features in at91 (even if they pursuit > the same goal). So I do prefer to let the user choose which feature is > preferred for his application and add a different flag. > > >>> (this kind of thing is why I'm not convinced that generic pinconf works >>> so well... What if we need psecs in the future?) >> >> Should I keep the at91 native pinconf binding and add the missing flags >> to this binding >> (OUTPUT configuration flags) ? >> >> This was another question I asked in my cover letter: wether or not the >> generic pinconf >> binding should be used. > > The question is: how much this "generic" pinconf is... well... generic! This is why I don't really like the concept of generic pinconf; it ends up being more: whoever defines something first imposes their SoCs' viewpoint on that feature/property, and then everything else is declared non-generic. In many cases, I think bindings will need to add SoC-specific properties beyond generic pinconf (or perhaps only use SoC-specific properties and ignore generic pinconf). In the case of deglitch here, perhaps that's the best answer. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
