On 08/26/2013 12:18 PM, Fabian Vogt wrote: > This driver supports the GPIO controller found in LSI ZEVIO SoCs. > It has been successfully tested on a TI nspire CX calculator. What changed in v5 (or indeed any other versions?) > diff --git a/Documentation/devicetree/bindings/gpio/gpio-zevio.txt b/Documentation/devicetree/bindings/gpio/gpio-zevio.txt > +Zevio GPIO controller > + > +Required properties: > +- compatible = "lsi,zevio-gpio" > +- reg = <BASEADDR SIZE> Perhaps this should say: reg: Contains a single register specifier for the GPIO module's registers. > +- #gpio-cells = <2> This should describe what those cells are. For example perhaps: #gpio-cells. Must be 2. The first cell is the GPIO number. The second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
