Re: [PATCH v12 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023-09-27 09:55, Niklas Schnelle wrote:
On Tue, 2023-09-26 at 13:08 -0300, Jason Gunthorpe wrote:
On Tue, Sep 26, 2023 at 05:04:28PM +0200, Joerg Roedel wrote:
Hi Niklas,

On Fri, Aug 25, 2023 at 12:11:15PM +0200, Niklas Schnelle wrote:
Niklas Schnelle (6):
       iommu: Allow .iotlb_sync_map to fail and handle s390's -ENOMEM return
       s390/pci: prepare is_passed_through() for dma-iommu
       s390/pci: Use dma-iommu layer
       iommu/s390: Disable deferred flush for ISM devices
       iommu/dma: Allow a single FQ in addition to per-CPU FQs
       iommu/dma: Use a large flush queue and timeout for shadow_on_flush

Turned out this series has non-trivial conflicts with Jasons
default-domain work so I had to remove it from the IOMMU tree for now.
Can you please rebase it to the latest iommu/core branch and re-send? I
will take it into the tree again then.

Niklas, I think you just 'take yours' to resolve this. All the
IOMMU_DOMAIN_PLATFORM related and .default_domain = parts should be
removed. Let me know if you need anything

Thanks,
Jason

Hi Joerg, Hi Jason,

I've run into an unfortunate problem, not with the rebase itself but
with the iommu/core branch.

Jason is right, I basically need to just remove the platform ops and
.default_domain ops. This seems to work fine for an NVMe both in the
host and also when using the IOMMU with vfio-pci + KVM. I've already
pushed the result of that to my git.kernel.org:
https://git.kernel.org/pub/scm/linux/kernel/git/niks/linux.git/log/?h=b4/dma_iommu

The problem is that something seems to  be broken in the iommu/core
branch. Regardless of whether I have my DMA API conversion on top or
with the base iommu/core branch I can not use ConnectX-4 VFs.

# lspci
111a:00:00.0 Ethernet controller: Mellanox Technologies MT27710 Family [ConnectX-4 Lx Virtual Function]
# dmesg | grep mlx
[    3.189749] mlx5_core 111a:00:00.0: mlx5_mdev_init:1802:(pid 464): Failed initializing cmdif SW structs, aborting
[    3.189783] mlx5_core: probe of 111a:00:00.0 failed with error -12

This same card works on v6.6-rc3 both with and without my DMA API
conversion patch series applied. Looking at mlx5_mdev_init() ->
mlx5_cmd_init(). The -ENOMEM seems to come from the following
dma_pool_create():

cmd->pool = dma_pool_create("mlx5_cmd", mlx5_core_dma_dev(dev), size, align, 0);

I'll try to debug this further but wanted to let you know already in
case you have some ideas.

I could imagine that potentially something in the initial default domain conversion somehow interferes with the DMA ops in a way that ends up causing alloc_cmd_page() to fail (maybe calling zpci_dma_init_device() at the wrong point, or too many times?). FWIW I see nothing that would obviously affect dma_pool_create() itself.

Robin.

Either way as it doesn't seem to be related
to the DMA API conversion I can sent that out again regardless if you
want, really don't want to miss another cycle.

Thanks,
Niklas



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux