On 08/22/2013 01:37 AM, Johannes Thumshirn wrote:
> On Wed, Aug 21, 2013 at 11:34:00AM -0600, Stephen Warren wrote:
>> On 08/21/2013 06:42 AM, Johannes Thumshirn wrote:
>>> I accidently put the devicetree bindings for the MEN A21 watchdog driver in
>>> Documentation/devicetree/bindings/gpio instead of
>>> Documentation/devicetree/bindings/watchdog, this patch addresses this error.
>>
>> The rename sounds fine, so that part,
>> Acked-by: Stephen Warren <swarren@xxxxxxxxxx>
>>
>> However, the binding itself doesn't look right; it appears to have a
>> single "gpios" property rather than using separate named xxx-gpios
>> properties for different things...
>
> Ok, so I'll need something like the following?
>
> watchdog {
> compatible ="men,a021-wdt";
> enable-gpios = <&gpio3 9 1>; /* WD_EN */
> fast-gpios = <&gpio3 10 1>; /* WD_FAST */
> trig-gpios = <&gpio3 11 1>; /* WD_TRIG */
> rst0-gpio = <&gpio3 6 1>; /* RST_CAUSE[0] */
> rst1-gpio = <&gpio3 7 1>; /* RST_CAUSE[1] */
> rst2-gpio = <&gpio3 8 1>; /* RST_CAUSE[2] */
> };
Yes, that looks more like what I'd expect, albeit I'd probably expect to
see a rst-gpio property with 3 entries.
> Or is there something like of_get_named_gpios(...) so I can put all 3 rst-gpios
> into one property? A quick grep only revealed of_get_named_gpio(...).
The availablity of APIs within Linux shouldn't impact the binding
definitions. I would imagine it's easy enough to add
of_get_named_gpio_by_index() or similar to Linux.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
