Re: [PATCH V4 2/3] coresight: etm: Make cycle count threshold user configurable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/08/2023 12:20, Anshuman Khandual wrote:
Cycle counting is enabled, when requested and supported but with a default
threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into TRCCCCTLR,
representing the minimum interval between cycle count trace packets.

This makes cycle threshold user configurable, from the user space via perf
event attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT,
in case no explicit request. As expected it creates a sysfs file as well.

/sys/bus/event_source/devices/cs_etm/format/cc_threshold

New 'cc_threshold' uses 'event->attr.config3' as no more space is available
in 'event->attr.config1' or 'event->attr.config2'.

Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Cc: Mike Leach <mike.leach@xxxxxxxxxx>
Cc: James Clark <james.clark@xxxxxxx>
Cc: Leo Yan <leo.yan@xxxxxxxxxx>
Cc: coresight@xxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-doc@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Reviewed-by: Mike Leach <mike.leach@xxxxxxxxxx>
Signed-off-by: Anshuman Khandual <anshuman.khandual@xxxxxxx>
---
  drivers/hwtracing/coresight/coresight-etm-perf.c   |  2 ++
  drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 ++++++++++--
  2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 5ca6278baff4..09f75dffae60 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset,		"config:0-3");
  PMU_FORMAT_ATTR(sinkid,		"config2:0-31");
  /* config ID - set if a system configuration is selected */
  PMU_FORMAT_ATTR(configid,	"config2:32-63");
+PMU_FORMAT_ATTR(cc_threshold,	"config3:0-11");
/*
@@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = {
  	&format_attr_preset.attr,
  	&format_attr_configid.attr,
  	&format_attr_branch_broadcast.attr,
+	&format_attr_cc_threshold.attr,
  	NULL,
  };
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 591fab73ee79..3193dafa7618 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -635,7 +635,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
  	struct etmv4_config *config = &drvdata->config;
  	struct perf_event_attr *attr = &event->attr;
  	unsigned long cfg_hash;
-	int preset;
+	int preset, cc_threshold;
/* Clear configuration from previous run */
  	memset(config, 0, sizeof(struct etmv4_config));
@@ -658,7 +658,15 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
  	if (attr->config & BIT(ETM_OPT_CYCACC)) {
  		config->cfg |= TRCCONFIGR_CCI;
  		/* TRM: Must program this for cycacc to work */
-		config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
+		cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK;
+		if (cc_threshold) {
+			if (cc_threshold < drvdata->ccitmin)
+				config->ccctlr = drvdata->ccitmin;
+			else
+				config->ccctlr = cc_threshold;
+		} else {
+			config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;

Ideally this must be the ccitmin ? Theoretically, default value could be bigger than the minimum value supported by the implementation (i.e., ccitmin)

Suzuki

+		}
  	}
  	if (attr->config & BIT(ETM_OPT_TS)) {
  		/*




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux