On Tue, Aug 15, 2023 at 08:56:50PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> The GPIO subsystem has a serious problem with undefined behavior and
> use-after-free bugs on hot-unplug of GPIO chips. This can be considered a
> corner-case by some as most GPIO controllers are enabled early in the
> boot process and live until the system goes down but most GPIO drivers
> do allow unbind over sysfs, many are loadable modules that can be (force)
> unloaded and there are also GPIO devices that can be dynamically detached,
> for instance CP2112 which is a USB GPIO expender.
>
> Bugs can be triggered both from user-space as well as by in-kernel users.
> We have the means of testing it from user-space via the character device
> but the issues manifest themselves differently in the kernel.
>
> This is a proposition of adding a new virtual driver - a configurable
> GPIO consumer that can be configured over configfs (similarly to
> gpio-sim).
>
> The configfs interface allows users to create dynamic GPIO lookup tables
> that are registered with the GPIO subsystem. Every config group
> represents a consumer device. Every sub-group represents a single GPIO
> lookup. The device can work in three modes: just keeping the line
> active, toggling it every second or requesting its interrupt and
> reporting edges. Every lookup allows to specify the key, offset and
> flags as per the lookup struct defined in linux/gpio/machine.h.
>
> The module together with gpio-sim allows to easily trigger kernel
> hot-unplug errors. A simple use-case is to create a simulated chip,
> setup the consumer to lookup one of its lines in 'monitor' mode, unbind
> the simulator, unbind the consumer and observe the fireworks in dmesg.
>
> This driver is aimed as a helper in tackling the hot-unplug problem in
> GPIO as well as basis for future regression testing once the fixes are
> upstream.
...
> + struct gpio_consumer_device *dev = lookup->parent;
> +
> + guard(mutex)(&dev->lock);
> +
> + return sprintf(page, "%s\n", lookup->key);
...
> +static ssize_t
> +gpio_consumer_lookup_config_offset_show(struct config_item *item, char *page)
> +{
> + struct gpio_consumer_lookup *lookup = to_gpio_consumer_lookup(item);
> + struct gpio_consumer_device *dev = lookup->parent;
> + unsigned int offset;
> +
> + scoped_guard(mutex, &dev->lock)
> + offset = lookup->offset;
> +
> + return sprintf(page, "%d\n", offset);
Consistently it can be simplified same way
guard(mutex)(&dev->lock);
return sprintf(page, "%d\n", lookup->offset);
BUT. Thinking about this more. With guard() we put sprintf() inside the lock,
which is suboptimal from runtime point of view. So, I think now that all these
should actually use scoped_guard() rather than guard().
> +}
...
> + guard(mutex)(&dev->lock);
> +
> + return lookup->flags;
...
> +static ssize_t
> +gpio_consumer_lookup_config_transitory_show(struct config_item *item,
> + char *page)
> +{
> + enum gpio_lookup_flags flags;
> +
> + flags = gpio_consumer_lookup_get_flags(item);
This is perfectly one line < 80 characters.
> + return sprintf(page, "%s\n", flags & GPIO_TRANSITORY ? "1" : "0");
> +}
--
With Best Regards,
Andy Shevchenko
