On 08/21/2013 07:06 AM, George Cherian wrote:
> Hi Stephen,
>
> On 8/20/2013 10:23 PM, Stephen Warren wrote:
>>> >ID pins are connected to pcf8575, and the pcf8575's interrupt line is
>>> >inturn connected to
>>> >gpio bank6 pin 11, we use this gpio interrupt to detect the ID pin
>>> change.
>> In that case, the PCF8575 node needs to be a GPIO controller and an IRQ
>> controller, as does the driver for the PCF8575. This binding should have
>> a single entry in the gpios property, and the driver can call
>> gpio_to_irq() on that so it knows which IRQ to request.
>
> You meant some thing like this?
>
> pcf_usb: pcf8575@21 {
> compatible = "ti,pcf8575";
> reg = <0x21>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-parent = <&gpio6>;
> interrupts = <11 2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> };
>
> usb_vid_gpio {
> compatible = "ti,dra7xx-usb";
> gpios = <&pcf_usb 1 0>;
> };
Yes.
Except that the compatible value for the usb_vid_gpio node still looks
wrong, since I think that node isn't anything to do with any particular SoC.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
