On Tue, 2013-08-20 at 18:01 +0100, Pawel Moll wrote: > On Tue, 2013-08-20 at 16:06 +0100, Pawel Moll wrote: > > On Tue, 2013-08-20 at 16:01 +0100, Kumar Gala wrote: > > > On Aug 20, 2013, at 9:54 AM, Ivan T. Ivanov wrote: > > > > > > > > > > > Hi, > > > > > > > > On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote: > > > >> On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote: > > > >>> Hi, > > > >>> > > > >>> On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote: > > > >>>> Hi, > > > >>>> > > > >>>> On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote: > > > >>>>>> On Tue, Aug 20, 2013 at 12:56:04PM +0300, Ivan T. Ivanov wrote: > > > >>>>>>> From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx> > > > >>>>>>> > > > >>>>>>> These drivers handles control and configuration of the HS > > > >>>>>>> and SS USB PHY transceivers. They are part of the driver > > > >>>>>>> which manage Synopsys DesignWare USB3 controller stack > > > >>>>>>> inside Qualcomm SoC's. > > > >>>>>>> > > > >>>>>>> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx> > > > >>>>>>> --- > > > >>>>>>> drivers/usb/phy/Kconfig | 11 ++ > > > >>>>>>> drivers/usb/phy/Makefile | 2 + > > > >>>>>>> drivers/usb/phy/phy-msm-dwc3-hs.c | 327 ++++++++++++++++++++++++++++++++ > > > >>>>>>> drivers/usb/phy/phy-msm-dwc3-ss.c | 374 +++++++++++++++++++++++++++++++++++++ > > > >>>>>> > > > >>>>>> please rename these PHY drivers, they have nothing to do with DWC3. PHYs > > > >>>>>> don't care about the USB controller. > > > >>>>> > > > >>>>> I think they are SNPS DesignWare PHY's, additionally > > > >>>>> wrapped with Qualcomm logic. I could substitute "dwc3" > > > >>>>> with just "dw", which will be more correct. > > > >>>> > > > >>>> alright, thank you. Let's add Paul to the loop since he might have very > > > >>>> good insight in the synopsys PHYs. > > > >>>> > > > >>>> mental note: if any other platform shows up with Synopsys PHY, ask them > > > >>>> to use this driver instead :-) > > > >>> > > > >>> I really doubt that this will bi possible. Control of the PHY's is > > > >>> not directly trough ULPI, UTMI or PIPE3 interfaces, but trough > > > >>> QSCRATCH registers, which of course is highly Qualcomm specific. > > > >> > > > >> isn't it a memory mapped IP ? doesn't synopsys provide their own set of > > > >> registers ? > > > > > > > > From what I see it is not directly mapped. How QSCRATCH write and > > > > reads transactions are translated to DW IP is unclear to me. > > > > > > > > > I think the question is how does SW access them? > > > > I afraid the answer may be: "it depends on the SOC". In my past I had to > > initialize a (SATA) PHY by implementing a software JTAG state machine, > > as the PHY's registers were not memory mapped *at all*. And the IP > > itself came from Synopsys, Cadence or yet another EDA company... > > Having said all that... If the PHY's spec at least defined layout of the > registers in question and driver was using regmap API to talk to the > device (initially regmap-mmio), it has some chances to become universal. > The SOCs designed like "my" one would have to provide a custom regmap > implementation. Sound reasonable. Unfortunately I don't have PHY's IP spec. Regards, Ivan > > Paweł > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
