On Thu, 2023-07-20 at 09:13 -0700, Jakub Kicinski wrote: > page pool and XDP should not be accessed from IRQ context > which may happen if drivers try to clean up XDP TX with > NAPI budget of 0. > > Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx> > --- > CC: corbet@xxxxxxx > CC: linux-doc@xxxxxxxxxxxxxxx > --- > Documentation/networking/napi.rst | 13 +++++++------ > 1 file changed, 7 insertions(+), 6 deletions(-) > > diff --git a/Documentation/networking/napi.rst b/Documentation/networking/napi.rst > index a7a047742e93..7bf7b95c4f7a 100644 > --- a/Documentation/networking/napi.rst > +++ b/Documentation/networking/napi.rst > @@ -65,15 +65,16 @@ argument - drivers can process completions for any number of Tx > packets but should only process up to ``budget`` number of > Rx packets. Rx processing is usually much more expensive. > > -In other words, it is recommended to ignore the budget argument when > -performing TX buffer reclamation to ensure that the reclamation is not > -arbitrarily bounded; however, it is required to honor the budget argument > -for RX processing. > +In other words for Rx processing the ``budget`` argument limits how many > +packets driver can process in a single poll. Rx specific APIs like page > +pool or XDP cannot be used at all when ``budget`` is 0. > +skb Tx processing should happen regardless of the ``budget``, but if > +the argument is 0 driver cannot call any XDP (or page pool) APIs. > This isn't accurate, and I would say it is somewhat dangerous advice. The Tx still needs to be processed regardless of if it is processing page_pool pages or XDP pages. I agree the Rx should not be processed, but the Tx must be processed using mechanisms that do NOT make use of NAPI optimizations when budget is 0. So specifically, xdp_return_frame is safe in non-NAPI Tx cleanup. The xdp_return_frame_rx_napi is not. Likewise there is napi_consume_skb which will use either a NAPI or non- NAPI version of things depending on if budget is 0 or not. For the page_pool calls there is the "allow_direct" argument that is meant to decide between recycling in directly into the page_pool cache or not. It should only be used in the Rx handler itself when budget is non-zero. I realise this was written up in response to a patch on the Mellanox driver. Based on the patch in question it looks like they were calling page_pool_recycle_direct outside of NAPI context. There is an explicit warning above that function about NOT calling it outside of NAPI context. > .. warning:: > > - The ``budget`` argument may be 0 if core tries to only process Tx completions > - and no Rx packets. > + The ``budget`` argument may be 0 if core tries to only process > + skb Tx completions and no Rx or XDP packets. > > The poll method returns the amount of work done. If the driver still > has outstanding work to do (e.g. ``budget`` was exhausted) We cannot make this distinction if both XDP and skb are processed in the same Tx queue. Otherwise you will cause the Tx to stall and break netpoll. If the ring is XDP only then yes, it can be skipped like what they did in the Mellanox driver, but if it is mixed then the XDP side of things needs to use the "safe" versions of the calls.
