Signed-off-by: Yann Cantin <yann.cantin@xxxxxxxxxxx> --- Documentation/ABI/testing/sysfs-driver-ebeam | 53 ++ drivers/input/misc/Kconfig | 22 + drivers/input/misc/Makefile | 1 + drivers/input/misc/ebeam.c | 763 +++++++++++++++++++++++++++ 4 files changed, 839 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-ebeam create mode 100644 drivers/input/misc/ebeam.c diff --git a/Documentation/ABI/testing/sysfs-driver-ebeam b/Documentation/ABI/testing/sysfs-driver-ebeam new file mode 100644 index 0000000..552a428 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-ebeam @@ -0,0 +1,53 @@ +What: /sys/class/input/inputXX/device/min_x + /sys/class/input/inputXX/device/min_y + /sys/class/input/inputXX/device/max_x + /sys/class/input/inputXX/device/max_y +Date: Jul 2013 +Kernel Version: 3.11 +Contact: yann.cantin@xxxxxxxxxxx + linux-usb@xxxxxxxxxxxxxxx +Description: + Reading from these files return the actually used range values of + the reported coordinates. + Writing to these files preset these range values. + See below for the calibration procedure. + +What: /sys/class/input/inputXX/device/h[1..9] +Date: Jul 2013 +Kernel Version: 3.11 +Contact: yann.cantin@xxxxxxxxxxx + linux-usb@xxxxxxxxxxxxxxx +Description: + Reading from these files return the 3x3 transformation matrix elements + actually used, in row-major. + Writing to these files preset these elements values. + See below for the calibration procedure. + +What: /sys/class/input/inputXX/device/calibrated +Date: Jul 2013 +Kernel Version: 3.11 +Contact: yann.cantin@xxxxxxxxxxx + linux-usb@xxxxxxxxxxxxxxx +Description: + Reading from this file : + - Return 0 if the driver is in "un-calibrated" mode : it actually send + raw coordinates in the device's internal coordinates system. + - Return 1 if the driver is in "calibrated" mode : it send computed coordinates + that (hopefully) matches the screen's coordinates system. + Writing 1 to this file enable the "calibrated" mode, 0 reset the driver in + "un-calibrated" mode. + +Calibration procedure : + +When loaded, the driver is in "un-calibrated" mode : it send device's raw coordinates +in the [0..65535]x[0..65535] range, the transformation matrix is the identity. + +A calibration program have to compute a homography transformation matrix that convert +the device's raw coordinates to the matching screen's ones. +It then write to the appropriate sysfs files the computed values, pre-setting the +driver's parameters : xy range, and the matrix's elements. +When all values are passed, it write 1 to the calibrated sysfs file to enable the "calibrated" mode. + +Warning : The parameters aren't used until 1 is writen to the calibrated sysfs file. + +Writing 0 to the calibrated sysfs file reset the driver in "un-calibrated" mode. diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 0b541cd..454df2d 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -93,6 +93,28 @@ config INPUT_BMA150 To compile this driver as a module, choose M here: the module will be called bma150. +config INPUT_EBEAM_USB + tristate "USB eBeam driver" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you have a USB eBeam pointing device and want to + use it without any proprietary user space tools. + + Have a look at <http://sourceforge.net/projects/ebeam/> for + a usage description and the required user-space tools. + + Supported devices : + - Luidia eBeam Classic Projection and eBeam Edge Projection + - Nec NP01Wi1 & NP01Wi2 interactive solution + + Supposed working devices, need test, may lack functionnality : + - Luidia eBeam Edge Whiteboard and eBeam Engage + - Hitachi Starboard FX-63, FX-77, FX-82, FX-77GII + + To compile this driver as a module, choose M here: the + module will be called ebeam. + config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 829de43..dd2fe33 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o +obj-$(CONFIG_INPUT_EBEAM_USB) += ebeam.o obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o diff --git a/drivers/input/misc/ebeam.c b/drivers/input/misc/ebeam.c new file mode 100644 index 0000000..cf551ab --- /dev/null +++ b/drivers/input/misc/ebeam.c @@ -0,0 +1,763 @@ +/****************************************************************************** + * + * eBeam driver + * + * Copyright (C) 2012 Yann Cantin (yann.cantin@xxxxxxxxxxx) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * based on + * + * usbtouchscreen.c by Daniel Ritz <daniel.ritz@xxxxxx> + * aiptek.c (sysfs/settings) by Chris Atenasio <chris@xxxxxxxx> + * Bryan W. Headley <bwheadley@xxxxxxxxxxxxx> + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/math64.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/usb.h> +#include <linux/usb/input.h> + +#define DRIVER_AUTHOR "Yann Cantin <yann.cantin@xxxxxxxxxxx>" +#define DRIVER_DESC "USB eBeam Driver" + +/* Common values for eBeam devices */ +#define REPT_SIZE 8 /* packet size */ +#define MIN_RAW_X 0 /* raw coordinates ranges */ +#define MAX_RAW_X 0xFFFF +#define MIN_RAW_Y 0 +#define MAX_RAW_Y 0xFFFF + + +#define USB_VENDOR_ID_EFI 0x2650 /* Electronics For Imaging, Inc */ +#define USB_DEVICE_ID_EFI_EBEAM 0x1311 /* eBeam hardware : */ + /* Luidia Classic and Edge */ + /* Nec NP01Wi1 & NP01Wi2 */ + +#define EBEAM_BTN_TIP 0x1 /* tip */ +#define EBEAM_BTN_LIT 0x2 /* little */ +#define EBEAM_BTN_BIG 0x4 /* big */ + +/* ebeam settings */ +struct ebeam_settings { + int min_x; /* computed coordinates ranges for the input layer */ + int max_x; + int min_y; + int max_y; + + /* H matrix */ + s64 h1; + s64 h2; + s64 h3; + s64 h4; + s64 h5; + s64 h6; + s64 h7; + s64 h8; + s64 h9; +}; + +/* ebeam device */ +struct ebeam_device { + unsigned char *data; + dma_addr_t data_dma; + unsigned char *buffer; + int buf_len; + struct urb *irq; + struct usb_interface *interface; + struct input_dev *input; + char name[128]; + char phys[64]; + void *priv; + + struct ebeam_settings cursetting; /* device's current settings */ + struct ebeam_settings newsetting; /* ... and new ones */ + + bool calibrated; /* false : send raw */ + /* true : send computed */ + + u16 raw_x, raw_y; /* raw coordinates */ + int x, y; /* computed coordinates */ + int btn_map; /* internal buttons map */ +}; + +/* device types */ +enum { + DEVTYPE_EBEAM, +}; + +static const struct usb_device_id ebeam_devices[] = { + {USB_DEVICE(USB_VENDOR_ID_EFI, USB_DEVICE_ID_EFI_EBEAM), + .driver_info = DEVTYPE_EBEAM}, + {} +}; + +static void ebeam_init_settings(struct ebeam_device *ebeam) +{ + ebeam->calibrated = false; + + /* Init (x,y) min/max to raw ones */ + ebeam->cursetting.min_x = ebeam->newsetting.min_x = MIN_RAW_X; + ebeam->cursetting.max_x = ebeam->newsetting.max_x = MAX_RAW_X; + ebeam->cursetting.min_y = ebeam->newsetting.min_y = MIN_RAW_Y; + ebeam->cursetting.max_y = ebeam->newsetting.max_y = MAX_RAW_Y; + + /* Safe values for the H matrix (Identity) */ + ebeam->cursetting.h1 = ebeam->newsetting.h1 = 1; + ebeam->cursetting.h2 = ebeam->newsetting.h2 = 0; + ebeam->cursetting.h3 = ebeam->newsetting.h3 = 0; + + ebeam->cursetting.h4 = ebeam->newsetting.h4 = 0; + ebeam->cursetting.h5 = ebeam->newsetting.h5 = 1; + ebeam->cursetting.h6 = ebeam->newsetting.h6 = 0; + + ebeam->cursetting.h7 = ebeam->newsetting.h7 = 0; + ebeam->cursetting.h8 = ebeam->newsetting.h8 = 0; + ebeam->cursetting.h9 = ebeam->newsetting.h9 = 1; +} + +static void ebeam_setup_input(struct ebeam_device *ebeam, + struct input_dev *input_dev) +{ + unsigned long flags; + + /* Take event lock while modifying parameters */ + spin_lock_irqsave(&input_dev->event_lock, flags); + + /* Properties */ + set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + + /* Events generated */ + set_bit(EV_KEY, input_dev->evbit); + set_bit(EV_ABS, input_dev->evbit); + + /* Keys */ + set_bit(BTN_LEFT, input_dev->keybit); + set_bit(BTN_MIDDLE, input_dev->keybit); + set_bit(BTN_RIGHT, input_dev->keybit); + + /* Axis */ + if (!ebeam->calibrated) { + ebeam->cursetting.min_x = MIN_RAW_X; + ebeam->cursetting.max_x = MAX_RAW_X; + ebeam->cursetting.min_y = MIN_RAW_Y; + ebeam->cursetting.max_y = MAX_RAW_Y; + } + + input_set_abs_params(input_dev, ABS_X, + ebeam->cursetting.min_x, ebeam->cursetting.max_x, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + ebeam->cursetting.min_y, ebeam->cursetting.max_y, + 0, 0); + + spin_unlock_irqrestore(&input_dev->event_lock, flags); +} + +/******************************************************************************* + * sysfs part + */ + +/* + * screen min/max and H matrix coefs + * _get return *current* value + * _set set new value + */ +#define DEVICE_MINMAX_ATTR(MM) \ +static ssize_t ebeam_##MM##_get(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct ebeam_device *ebeam = dev_get_drvdata(dev); \ + \ + return snprintf(buf, PAGE_SIZE, "%d\n", ebeam->cursetting.MM); \ +} \ +static ssize_t ebeam_##MM##_set(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, \ + size_t count) \ +{ \ + struct ebeam_device *ebeam = dev_get_drvdata(dev); \ + int err, MM; \ + \ + err = kstrtoint(buf, 10, &MM); \ + if (err) \ + return err; \ + \ + ebeam->newsetting.MM = MM; \ + return count; \ +} \ +static DEVICE_ATTR(MM, S_IRUGO | S_IWUGO, \ + ebeam_##MM##_get, \ + ebeam_##MM##_set) + +DEVICE_MINMAX_ATTR(min_x); +DEVICE_MINMAX_ATTR(max_x); +DEVICE_MINMAX_ATTR(min_y); +DEVICE_MINMAX_ATTR(max_y); + +#define DEVICE_H_ATTR(SET_ID) \ +static ssize_t ebeam_h##SET_ID##_get(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct ebeam_device *ebeam = dev_get_drvdata(dev); \ + \ + return snprintf(buf, PAGE_SIZE, "%lld\n", ebeam->cursetting.h##SET_ID);\ +} \ +static ssize_t ebeam_h##SET_ID##_set(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, \ + size_t count) \ +{ \ + struct ebeam_device *ebeam = dev_get_drvdata(dev); \ + int err; \ + u64 h; \ + \ + err = kstrtoll(buf, 10, &h); \ + if (err) \ + return err; \ + \ + ebeam->newsetting.h##SET_ID = h; \ + return count; \ +} \ +static DEVICE_ATTR(h##SET_ID, S_IRUGO | S_IWUGO, \ + ebeam_h##SET_ID##_get, \ + ebeam_h##SET_ID##_set) + +DEVICE_H_ATTR(1); +DEVICE_H_ATTR(2); +DEVICE_H_ATTR(3); +DEVICE_H_ATTR(4); +DEVICE_H_ATTR(5); +DEVICE_H_ATTR(6); +DEVICE_H_ATTR(7); +DEVICE_H_ATTR(8); +DEVICE_H_ATTR(9); + +/* + * sysfs calibrated + * Once H matrix coefs are set, writing 1 to this file triggers + * coordinates mapping. + * Anything else reset the device to un-calibrated mode, + * storing cursetting in newsetting. +*/ +static ssize_t ebeam_calibrated_get(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ebeam_device *ebeam = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", ebeam->calibrated); +} + +static ssize_t ebeam_calibrated_set(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct ebeam_device *ebeam = dev_get_drvdata(dev); + int err, c; + + err = kstrtoint(buf, 10, &c); + if (err) + return err; + + if (c == 1) { + memcpy(&ebeam->cursetting, &ebeam->newsetting, + sizeof(struct ebeam_settings)); + ebeam->calibrated = true; + ebeam_setup_input(ebeam, ebeam->input); + } else { + memcpy(&ebeam->newsetting, &ebeam->cursetting, + sizeof(struct ebeam_settings)); + ebeam->calibrated = false; + ebeam_setup_input(ebeam, ebeam->input); + } + + return count; +} + +static DEVICE_ATTR(calibrated, S_IRUGO | S_IWUGO, + ebeam_calibrated_get, ebeam_calibrated_set); + +static struct attribute *ebeam_attrs[] = { + &dev_attr_min_x.attr, + &dev_attr_min_y.attr, + &dev_attr_max_x.attr, + &dev_attr_max_y.attr, + &dev_attr_h1.attr, + &dev_attr_h2.attr, + &dev_attr_h3.attr, + &dev_attr_h4.attr, + &dev_attr_h5.attr, + &dev_attr_h6.attr, + &dev_attr_h7.attr, + &dev_attr_h8.attr, + &dev_attr_h9.attr, + &dev_attr_calibrated.attr, + NULL +}; + +static const struct attribute_group ebeam_attr_group = { + .attrs = ebeam_attrs, +}; + +/* IRQ */ +static int ebeam_read_data(struct ebeam_device *ebeam, unsigned char *pkt) +{ + +/* + * Packet description : 8 bytes + * + * nop packet : FF FF FF FF FF FF FF FF + * + * pkt[0] : Sensors + * bit 1 : ultrasound signal (guessed) + * bit 2 : IR signal (tested with a remote...) ; + * readings OK : 0x03 (anything else is a show-stopper) + * + * pkt[1] : raw_x low + * pkt[2] : raw_x high + * + * pkt[3] : raw_y low + * pkt[4] : raw_y high + * + * pkt[5] : fiability ? + * often 0xC0 + * > 0x80 : OK + * + * pkt[6] : + * buttons state (low 4 bits) + * 0x1 = no buttons + * bit 0 : tip (WARNING inversed : 0=pressed) + * bit 1 : ? (always 0 during tests) + * bit 2 : little (1=pressed) + * bit 3 : big (1=pressed) + * + * pointer ID : (high 4 bits) + * Tested : 0x6=wand ; + * Guessed : 0x1=red ; 0x2=blue ; 0x3=green ; 0x4=black ; + * 0x5=eraser + * bit 4 : pointer ID + * bit 5 : pointer ID + * bit 6 : pointer ID + * bit 7 : pointer ID + * + * + * pkt[7] : fiability ? + * often 0xFF + * + */ + + /* Filtering bad/nop packet */ + if (pkt[0] != 0x03) + return 0; + + ebeam->raw_x = (pkt[2] << 8) | pkt[1]; + ebeam->raw_y = (pkt[4] << 8) | pkt[3]; + + ebeam->btn_map = (!(pkt[6] & 0x1)) | + ((pkt[6] & 0x4) >> 1) | + ((pkt[6] & 0x8) >> 1); + + return 1; +} + +/* + * IRQ + * compute screen coordinates from raw + * Overflow and negative values are ignored + */ +static bool ebeam_calculate_xy(struct ebeam_device *ebeam) +{ + /* 64-bits divisions handled by div64_s64 */ + + s64 scale; + + if (!ebeam->calibrated) { + ebeam->x = ebeam->raw_x; + ebeam->y = ebeam->raw_y; + } else { + scale = ebeam->cursetting.h7 * ebeam->raw_x + + ebeam->cursetting.h8 * ebeam->raw_y + + ebeam->cursetting.h9; + + /* Who want a division by zero in kernel ? */ + if (scale == 0) { + dev_err(&(ebeam->interface)->dev, + "%s - Division by zero, wrong calibration.\n", + __func__); + dev_err(&(ebeam->interface)->dev, + "%s - Resetting to un-calibrated mode.\n", + __func__); + ebeam->calibrated = false; + return 0; + } + + /* + * We *must* round the result, but can't do (int) (v1/v2 + 0.5) + * + * (int) (v1/v2 + 0.5) <=> (int) ( (2*v1 + v2)/(2*v2) ) + */ + ebeam->x = + (int) div64_s64((((ebeam->cursetting.h1 * ebeam->raw_x + + ebeam->cursetting.h2 * ebeam->raw_y + + ebeam->cursetting.h3) << 1) + scale), + (scale << 1)); + ebeam->y = + (int) div64_s64((((ebeam->cursetting.h4 * ebeam->raw_x + + ebeam->cursetting.h5 * ebeam->raw_y + + ebeam->cursetting.h6) << 1) + scale), + (scale << 1)); + + /* check range */ + if ((ebeam->x < ebeam->cursetting.min_x) || + (ebeam->x > ebeam->cursetting.max_x) || + (ebeam->y < ebeam->cursetting.min_y) || + (ebeam->y > ebeam->cursetting.max_y)) + return 0; + } + + return 1; +} + +/* IRQ */ +static void ebeam_report_input(struct ebeam_device *ebeam) +{ + input_report_key(ebeam->input, BTN_LEFT, + (ebeam->btn_map & EBEAM_BTN_TIP)); + input_report_key(ebeam->input, BTN_MIDDLE, + (ebeam->btn_map & EBEAM_BTN_LIT)); + input_report_key(ebeam->input, BTN_RIGHT, + (ebeam->btn_map & EBEAM_BTN_BIG)); + + input_report_abs(ebeam->input, ABS_X, ebeam->x); + input_report_abs(ebeam->input, ABS_Y, ebeam->y); + + input_sync(ebeam->input); +} + +/* IRQ */ +static void ebeam_process_pkt(struct ebeam_device *ebeam, + unsigned char *pkt, int len) +{ + if (!ebeam_read_data(ebeam, pkt)) + return; + + if (!ebeam_calculate_xy(ebeam)) + return; + + ebeam_report_input(ebeam); +} + +/* IRQ + * handler */ +static void ebeam_irq(struct urb *urb) +{ + struct ebeam_device *ebeam = urb->context; + struct device *dev = &ebeam->interface->dev; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ETIME: + /* this urb is timing out */ + dev_dbg(dev, + "%s - urb timed out - was the device unplugged?\n", + __func__); + return; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + case -EPIPE: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); + return; + default: + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); + goto exit; + } + + ebeam_process_pkt(ebeam, ebeam->data, urb->actual_length); + +exit: + usb_mark_last_busy(interface_to_usbdev(ebeam->interface)); + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(dev, "%s - usb_submit_urb failed with result: %d\n", + __func__, retval); +} + +static int ebeam_open(struct input_dev *input) +{ + struct ebeam_device *ebeam = input_get_drvdata(input); + int r; + + ebeam->irq->dev = interface_to_usbdev(ebeam->interface); + + r = usb_autopm_get_interface(ebeam->interface) ? -EIO : 0; + if (r < 0) + goto out; + + if (usb_submit_urb(ebeam->irq, GFP_KERNEL)) { + r = -EIO; + goto out_put; + } + + ebeam->interface->needs_remote_wakeup = 1; +out_put: + usb_autopm_put_interface(ebeam->interface); +out: + return r; +} + +static void ebeam_close(struct input_dev *input) +{ + struct ebeam_device *ebeam = input_get_drvdata(input); + int r; + + usb_kill_urb(ebeam->irq); + + r = usb_autopm_get_interface(ebeam->interface); + ebeam->interface->needs_remote_wakeup = 0; + + if (!r) + usb_autopm_put_interface(ebeam->interface); +} + +static int ebeam_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct ebeam_device *ebeam = usb_get_intfdata(intf); + + usb_kill_urb(ebeam->irq); + + return 0; +} + +static int ebeam_resume(struct usb_interface *intf) +{ + struct ebeam_device *ebeam = usb_get_intfdata(intf); + struct input_dev *input = ebeam->input; + int result = 0; + + mutex_lock(&input->mutex); + if (input->users) + result = usb_submit_urb(ebeam->irq, GFP_NOIO); + mutex_unlock(&input->mutex); + + return result; +} + +static int ebeam_reset_resume(struct usb_interface *intf) +{ + return ebeam_resume(intf); +} + +static void ebeam_free_buffers(struct usb_device *udev, + struct ebeam_device *ebeam) +{ + usb_free_coherent(udev, REPT_SIZE, + ebeam->data, ebeam->data_dma); + kfree(ebeam->buffer); +} + +static struct usb_endpoint_descriptor * +ebeam_get_input_endpoint(struct usb_host_interface *interface) +{ + int i; + + for (i = 0; i < interface->desc.bNumEndpoints; i++) + if (usb_endpoint_dir_in(&interface->endpoint[i].desc)) + return &interface->endpoint[i].desc; + + return NULL; +} + +static int ebeam_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct ebeam_device *ebeam; + struct input_dev *input_dev; + struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev = interface_to_usbdev(intf); + int err = -ENOMEM; + + endpoint = ebeam_get_input_endpoint(intf->cur_altsetting); + if (!endpoint) + return -ENXIO; + + ebeam = kzalloc(sizeof(struct ebeam_device), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ebeam || !input_dev) + goto out_free; + + ebeam_init_settings(ebeam); + + ebeam->data = usb_alloc_coherent(udev, REPT_SIZE, + GFP_KERNEL, &ebeam->data_dma); + if (!ebeam->data) + goto out_free; + + ebeam->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!ebeam->irq) { + dev_dbg(&intf->dev, + "%s - usb_alloc_urb failed: ebeam->irq\n", __func__); + goto out_free_buffers; + } + + ebeam->interface = intf; + ebeam->input = input_dev; + + /* setup name */ + snprintf(ebeam->name, sizeof(ebeam->name), + "USB eBeam %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + if (udev->manufacturer || udev->product) { + strlcat(ebeam->name, + " (", + sizeof(ebeam->name)); + + if (udev->manufacturer) + strlcat(ebeam->name, + udev->manufacturer, + sizeof(ebeam->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(ebeam->name, + " ", + sizeof(ebeam->name)); + strlcat(ebeam->name, + udev->product, + sizeof(ebeam->name)); + } + + if (strlcat(ebeam->name, ")", sizeof(ebeam->name)) + >= sizeof(ebeam->name)) { + /* overflowed, closing ) anyway */ + ebeam->name[sizeof(ebeam->name)-2] = ')'; + } + } + + /* usb tree */ + usb_make_path(udev, ebeam->phys, sizeof(ebeam->phys)); + strlcat(ebeam->phys, "/input0", sizeof(ebeam->phys)); + + /* input setup */ + input_dev->name = ebeam->name; + input_dev->phys = ebeam->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, ebeam); + + input_dev->open = ebeam_open; + input_dev->close = ebeam_close; + + /* usb urb setup */ + if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) + usb_fill_int_urb(ebeam->irq, udev, + usb_rcvintpipe(udev, endpoint->bEndpointAddress), + ebeam->data, REPT_SIZE, + ebeam_irq, ebeam, endpoint->bInterval); + else + usb_fill_bulk_urb(ebeam->irq, udev, + usb_rcvbulkpipe(udev, endpoint->bEndpointAddress), + ebeam->data, REPT_SIZE, + ebeam_irq, ebeam); + + ebeam->irq->dev = udev; + ebeam->irq->transfer_dma = ebeam->data_dma; + ebeam->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* input final setup */ + ebeam_setup_input(ebeam, input_dev); + + err = input_register_device(ebeam->input); + if (err) { + dev_dbg(&intf->dev, + "%s - input_register_device failed, err: %d\n", + __func__, err); + goto out_free_urb; + } + + /* usb final setup */ + usb_set_intfdata(intf, ebeam); + + /* sysfs setup */ + err = sysfs_create_group(&intf->dev.kobj, &ebeam_attr_group); + if (err) { + dev_dbg(&intf->dev, + "%s - cannot create sysfs group, err: %d\n", + __func__, err); + goto out_unregister_input; + } + + return 0; + +out_unregister_input: + input_unregister_device(input_dev); + input_dev = NULL; +out_free_urb: + usb_free_urb(ebeam->irq); +out_free_buffers: + ebeam_free_buffers(udev, ebeam); +out_free: + input_free_device(input_dev); + kfree(ebeam); + return err; +} + +static void ebeam_disconnect(struct usb_interface *intf) +{ + struct ebeam_device *ebeam = usb_get_intfdata(intf); + + if (!ebeam) + return; + + dev_dbg(&intf->dev, + "%s - ebeam is initialized, cleaning up\n", __func__); + + usb_set_intfdata(intf, NULL); + /* this will stop IO via close */ + input_unregister_device(ebeam->input); + sysfs_remove_group(&intf->dev.kobj, &ebeam_attr_group); + usb_free_urb(ebeam->irq); + ebeam_free_buffers(interface_to_usbdev(intf), ebeam); + kfree(ebeam); +} + +MODULE_DEVICE_TABLE(usb, ebeam_devices); + +static struct usb_driver ebeam_driver = { + .name = "ebeam", + .probe = ebeam_probe, + .disconnect = ebeam_disconnect, + .suspend = ebeam_suspend, + .resume = ebeam_resume, + .reset_resume = ebeam_reset_resume, + .id_table = ebeam_devices, + .supports_autosuspend = 1, +}; + +module_usb_driver(ebeam_driver); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
