Re: [PATCH v5 02/11] block: Block Device Filtering Mechanism

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

在 2023/07/18 19:25, Sergei Shtepa 写道:
Hi.

On 7/18/23 03:37, Yu Kuai wrote:
Subject:
Re: [PATCH v5 02/11] block: Block Device Filtering Mechanism
From:
Yu Kuai <yukuai1@xxxxxxxxxxxxxxx>
Date:
7/18/23, 03:37

To:
Sergei Shtepa <sergei.shtepa@xxxxxxxxx>, Yu Kuai <yukuai1@xxxxxxxxxxxxxxx>, axboe@xxxxxxxxx, hch@xxxxxxxxxxxxx, corbet@xxxxxxx, snitzer@xxxxxxxxxx
CC:
viro@xxxxxxxxxxxxxxxxxx, brauner@xxxxxxxxxx, dchinner@xxxxxxxxxx, willy@xxxxxxxxxxxxx, dlemoal@xxxxxxxxxx, linux@xxxxxxxxxxxxxx, jack@xxxxxxx, ming.lei@xxxxxxxxxx, linux-block@xxxxxxxxxxxxxxx, linux-doc@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, linux-fsdevel@xxxxxxxxxxxxxxx, Donald Buczek <buczek@xxxxxxxxxxxxx>, "yukuai (C)" <yukuai3@xxxxxxxxxx>


Hi,

在 2023/07/17 22:39, Sergei Shtepa 写道:


On 7/11/23 04:02, Yu Kuai wrote:
bdev_disk_changed() is not handled, where delete_partition() and
add_partition() will be called, this means blkfilter for partiton will
be removed after partition rescan. Am I missing something?

Yes, when the bdev_disk_changed() is called, all disk block devices
are deleted and new ones are re-created. Therefore, the information
about the attached filters will be lost. This is equivalent to
removing the disk and adding it back.

For the blksnap module, partition rescan will mean the loss of the
change trackers data. If a snapshot was created, then such
a partition rescan will cause the snapshot to be corrupted.


I haven't review blksnap code yet, but this sounds like a problem.

I can't imagine a case where this could be a problem.
Partition rescan is possible only if the file system has not been
mounted on any of the disk partitions. Ioctl BLKRRPART will return
-EBUSY. Therefore, during normal operation of the system, rescan is
not performed.
And if the file systems have not been mounted, it is possible that
the disk partition structure has changed or the disk in the media
device has changed. In this case, it is better to detach the
filter, otherwise it may lead to incorrect operation of the module.

We can add prechange/postchange callback functions so that the
filter can track rescan process. But at the moment, this is not
necessary for the blksnap module.

So you mean that blkfilter is only used for the case that partition
is mounted? (Or you mean that partition is opened)

Then, I think you mean that filter should only be used for the partition
that is opended? Otherwise, filter can be gone at any time since
partition rescan can be gone.

//user
1. attach filter
		// other context rescan partition
2. mount fs
// user will found filter is gone.

Thanks,
Kuai


Therefore, I will refrain from making changes for now.


possible solutions I have in mind:

1. Store blkfilter for each partition from bdev_disk_changed() before
delete_partition(), and add blkfilter back after add_partition().

2. Store blkfilter from gendisk as a xarray, and protect it by
'open_mutex' like 'part_tbl', block_device can keep the pointer to
reference blkfilter so that performance from fast path is ok, and the
lifetime of blkfiter can be managed separately.

There was an idea to do filtering at the disk level,
but I abandoned it.
.

I think it's better to do filtering at the partition level as well.

Thanks,
Kuai

.





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux