Re: [PATCH 1/3] regulator: palmas: Update the DT binding doc for smps10 out1 and out2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/13/2013 01:33 AM, Laxman Dewangan wrote:
> Palams regulator SMPS10 is splitted into two regulator SMPS10-OUT1 and
> SMPS10-OUT2 to match with hw behavior. With this regulator name got
> changed in driver.
> 
> Update the DT binding document to match with driver.

Well, the driver should be derived from the binding document, not the
other way around, but this change is probably still fine...

> diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt

>  	       For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
> -	       smps45, smps457, smps7 depending on variant, smps6, smps[8-10],
> -	       ldo[1-9], ldoln, ldousb.
> +	       smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
> +	       mps10_out2, smps10_out1, do[1-9], ldoln, ldousb.
               ^^^                      ^^
               s/mps/smp/               s/do/ldo/

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux