I don't think these need to be in the dt -- you can set sane defaults
and then have something under sysfs to change them dynamically later if
necessary.
> +
> +Example:
> +
> +bma180@40 {
> + compatible = "bosch,bma180";
> + reg = <0x40>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
> + bosch,bandwidth = <300>;
> + bosch,resolution = <250>;
> + bosch,mode = <0>;
> +};
[...]
> +static int bma180_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct bma180_data *data;
> + struct iio_dev *indio_dev;
> + struct iio_trigger *trig;
> + struct device_node *np = client->dev.of_node;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> +
> + if (of_property_read_u32(np, "bosch,bandwidth", &data->bw))
> + data->bw = BMA180_DEF_BW;
> + if (of_property_read_u32(np, "bosch,resolution", &data->scale))
> + data->scale = BMA180_DEF_SCALE;
> + of_property_read_u32(np, "bosch,mode", &data->mode);
What if bosch,mode isn't decribed? It looks like it'll have an
uninitialised value.
> +
> + ret = bma180_chip_init(data);
> + if (ret < 0)
> + goto err_1;
> +
> + mutex_init(&data->mutex);
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->channels = bma180_channels;
> + indio_dev->num_channels = ARRAY_SIZE(bma180_channels);
> + indio_dev->name = BMA180_DRV_NAME;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->info = &bma180_info;
> +
> + trig = iio_trigger_alloc("%s-dev%d", indio_dev->name, indio_dev->id);
> + if (!trig) {
> + ret = -ENOMEM;
> + goto err_1;
> + }
> +
> + ret = devm_request_irq(&client->dev, client->irq,
> + iio_trigger_generic_data_rdy_poll,
> + IRQF_TRIGGER_RISING, BMA180_IRQ_NAME, trig);
> + if (ret) {
> + dev_err(&client->dev, "unable to request IRQ\n");
> + goto err_2;
> + }
> +
> + trig->dev.parent = &client->dev;
> + trig->ops = &bma180_trigger_ops;
> + iio_trigger_set_drvdata(trig, indio_dev);
> + data->trig = trig;
> + indio_dev->trig = trig;
> +
> + ret = iio_trigger_register(trig);
> + if (ret)
> + goto err_2;
> +
> + ret = iio_triggered_buffer_setup(indio_dev, NULL,
> + bma180_trigger_handler, NULL);
> + if (ret < 0) {
> + dev_err(&client->dev, "unable to setup iio triggered buffer\n");
> + goto err_3;
> + }
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0) {
> + dev_err(&client->dev, "unable to register iio device\n");
> + goto err_4;
> + }
> +
> + return 0;
> +
> +err_4:
> + iio_triggered_buffer_cleanup(indio_dev);
> +err_3:
> + iio_trigger_unregister(trig);
> +err_2:
> + iio_trigger_free(trig);
> +err_1:
> + bma180_chip_disable(data);
It would be nice to have (slightly) clearer labels here, e.g.
err_chip, err_trigger.
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
