Re: [PATCH v2 5/6] cgroup/cpuset: Documentation update for partition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Just a few small nits below:

On 5/31/23 09:34, Waiman Long wrote:
> This patch updates the cgroup-v2.rst file to include information about
> the new "cpuset.cpus.reserve" control file as well as the new remote
> partition.
> 
> Signed-off-by: Waiman Long <longman@xxxxxxxxxx>
> ---
>  Documentation/admin-guide/cgroup-v2.rst | 92 +++++++++++++++++++++----
>  1 file changed, 79 insertions(+), 13 deletions(-)
> 
> diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
> index f67c0829350b..3e9351c2cd27 100644
> --- a/Documentation/admin-guide/cgroup-v2.rst
> +++ b/Documentation/admin-guide/cgroup-v2.rst
> @@ -2215,6 +2215,38 @@ Cpuset Interface Files
>  
>  	Its value will be affected by memory nodes hotplug events.
>  
> +  cpuset.cpus.reserve
> +	A read-write multiple values file which exists only on root
> +	cgroup.
> +
> +	It lists all the CPUs that are reserved for adjacent and remote
> +	partitions created in the system.  See the next section for
> +	more information on what an adjacent or remote partitions is.
> +
> +	Creation of adjacent partition does not require touching this
> +	control file as CPU reservation will be done automatically.
> +	In order to create a remote partition, the CPUs needed by the
> +	remote partition has to be written to this file first.
> +
> +	Due to the fact that "cpuset.cpus.reserve" holds reserve CPUs
> +	that can be used by multiple partitions and automatic reservation
> +	may also race with manual reservation, an extension prefixes of
> +	"+" and "-" are allowed for this file to reduce race.
> +
> +	A "+" prefix can be used to indicate a list of additional
> +	CPUs that are to be added without disturbing the CPUs that are
> +	originally there.  For example, if its current value is "3-4",
> +	echoing ""+5" to it will change it to "3-5".

	        "+5"

> +
> +	Once a remote partition is destroyed, its CPUs have to be
> +	removed from this file or no other process can use them.  A "-"
> +	prefix can be used to remove a list of CPUs from it.  However,
> +	removing CPUs that are currently used in existing partitions
> +	may cause those partitions to become invalid.  A single "-"
> +	character without any number can be used to indicate removal
> +	of all the free CPUs not yet allocated to any partitions to
> +	avoid accidental partition invalidation.
> +
>    cpuset.cpus.partition
>  	A read-write single value file which exists on non-root
>  	cpuset-enabled cgroups.  This flag is owned by the parent cgroup
> @@ -2228,25 +2260,49 @@ Cpuset Interface Files
>  	  "isolated"	Partition root without load balancing
>  	  ==========	=====================================
>  
> -	The root cgroup is always a partition root and its state
> -	cannot be changed.  All other non-root cgroups start out as
> -	"member".
> +	A cpuset partition is a collection of cgroups with a partition
> +	root at the top of the hierarchy and its descendants except
> +	those that are separate partition roots themselves and their
> +	descendants.  A partition has exclusive access to the set of
> +	CPUs allocated to it.  Other cgroups outside of that partition
> +	cannot use any CPUs in that set.
> +
> +	There are two types of partitions - adjacent and remote.  The
> +	parent of an adjacent partition must be a valid partition root.
> +	Partition roots of adjacent partitions are all clustered around
> +	the root cgroup.  Creation of adjacent partition is done by
> +	writing the desired partition type into "cpuset.cpus.partition".
> +
> +	A remote partition does not require a partition root parent.
> +	So a remote partition can be formed far from the root cgroup.
> +	However, its creation is a 2-step process.  The CPUs needed
> +	by a remote partition ("cpuset.cpus" of the partition root)
> +	has to be written into "cpuset.cpus.reserve" of the root
> +	cgroup first.  After that, "isolated" can be written into
> +	"cpuset.cpus.partition" of the partition root to form a remote
> +	isolated partition which is the only supported remote partition
> +	type for now.
> +
> +	All remote partitions are terminal as adjacent partition cannot
> +	be created underneath it.  With the way remote partition is
> +	formed, it is not possible to create another valid remote
> +	partition underneath it.
> +
> +	The root cgroup is always a partition root and its state cannot
> +	be changed.  All other non-root cgroups start out as "member".
>  
>  	When set to "root", the current cgroup is the root of a new
> -	partition or scheduling domain that comprises itself and all
> -	its descendants except those that are separate partition roots
> -	themselves and their descendants.
> +	partition or scheduling domain.
>  
> -	When set to "isolated", the CPUs in that partition root will
> +	When set to "isolated", the CPUs in that partition will
>  	be in an isolated state without any load balancing from the
>  	scheduler.  Tasks placed in such a partition with multiple
>  	CPUs should be carefully distributed and bound to each of the
>  	individual CPUs for optimal performance.
>  
> -	The value shown in "cpuset.cpus.effective" of a partition root
> -	is the CPUs that the partition root can dedicate to a potential
> -	new child partition root. The new child subtracts available
> -	CPUs from its parent "cpuset.cpus.effective".
> +	The value shown in "cpuset.cpus.effective" of a partition root is
> +	the CPUs that are dedicated to that partition and not available
> +	to cgroups outside of that partittion.

	                           partition.

>  
>  	A partition root ("root" or "isolated") can be in one of the
>  	two possible states - valid or invalid.  An invalid partition
> @@ -2270,8 +2326,8 @@ Cpuset Interface Files
>  	In the case of an invalid partition root, a descriptive string on
>  	why the partition is invalid is included within parentheses.
>  
> -	For a partition root to become valid, the following conditions
> -	must be met.
> +	For an adjacent partition root to be valid, the following
> +	conditions must be met.
>  
>  	1) The "cpuset.cpus" is exclusive with its siblings , i.e. they
>  	   are not shared by any of its siblings (exclusivity rule).
> @@ -2281,6 +2337,16 @@ Cpuset Interface Files
>  	4) The "cpuset.cpus.effective" cannot be empty unless there is
>  	   no task associated with this partition.
>  
> +	For a remote partition root to be valid, the following conditions
> +	must be met.
> +
> +	1) The same exclusivity rule as adjacent partition root.
> +	2) The "cpuset.cpus" is not empty and all the CPUs must be
> +	   present in "cpuset.cpus.reserve" of the root cgroup and none
> +	   of them are allocated to another partition.
> +	3) The "cpuset.cpus" value must be present in all its ancestors
> +	   to ensure proper hierarchical cpu distribution.

	                                 CPU

> +
>  	External events like hotplug or changes to "cpuset.cpus" can
>  	cause a valid partition root to become invalid and vice versa.
>  	Note that a task cannot be moved to a cgroup with empty

-- 
~Randy



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux