Re: [PATCH v3 3/3] Documentation: trace: Add documentation for Coresight Dummy Trace

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 22, 2023 at 03:37:14PM +0800, Hao Zhang wrote:
> +Introduction
> +---------------------------
> +
> +Coresight Dummy Trace Module is for the specific devices that kernel
> +don't have permission to access or configure, e.g., CoreSight TPDMs
> +on Qualcomm platforms. So there need driver to register dummy devices
> +as Coresight devices. It may also be used to define components that
> +may not have any programming interfaces (e.g, static links), so that
> +paths can be established in the driver. Provide Coresight API for
> +dummy device operations, such as enabling and disabling dummy devices.
> +Build the Coresight path for dummy sink or dummy source for debugging.
> +
> +Config details
> +---------------------------
> +
> +There are two types of nodes, dummy sink and dummy source. The nodes
> +should be observed at the below coresight path::
> +
> +    ``/sys/bus/coresight/devices``.
> +
> +e.g.::
> +
> +    / $ ls -l /sys/bus/coresight/devices | grep dummy
> +    dummy0 -> ../../../devices/platform/soc@0/soc@0:dummy_source/dummy0
> +    dummy1 -> ../../../devices/platform/soc@0/soc@0:dummy_sink/dummy1

The wording confuses me, so I have to make the improv:

---- >8 ----
diff --git a/Documentation/trace/coresight/coresight-dummy.rst b/Documentation/trace/coresight/coresight-dummy.rst
index 7cb59f080c8892..f0a92669288b0c 100644
--- a/Documentation/trace/coresight/coresight-dummy.rst
+++ b/Documentation/trace/coresight/coresight-dummy.rst
@@ -8,27 +8,25 @@ Coresight Dummy Trace Module
     :Date:     May 2023
 
 Introduction
----------------------------
+------------
 
-Coresight Dummy Trace Module is for the specific devices that kernel
-don't have permission to access or configure, e.g., CoreSight TPDMs
-on Qualcomm platforms. So there need driver to register dummy devices
-as Coresight devices. It may also be used to define components that
-may not have any programming interfaces (e.g, static links), so that
-paths can be established in the driver. Provide Coresight API for
-dummy device operations, such as enabling and disabling dummy devices.
-Build the Coresight path for dummy sink or dummy source for debugging.
+The Coresight dummy trace module is for the specific devices that kernel don't
+have permission to access or configure, e.g., CoreSight TPDMs on Qualcomm
+platforms. For these devices, a dummy driver is needed to register them as
+Coresight devices. The module may also be used to define components that may
+not have any programming interfaces (e.g, static links), so that paths can be
+created in the driver. It provides Coresight API for operations on dummy
+devices, such as enabling and disabling them. It also provides the Coresight
+dummy sink/source paths for debugging.
 
 Config details
----------------------------
+--------------
 
-There are two types of nodes, dummy sink and dummy source. The nodes
-should be observed at the below coresight path::
+There are two types of nodes, dummy sink and dummy source. These nodes
+are available at ``/sys/bus/coresight/devices``.
 
-    ``/sys/bus/coresight/devices``.
+Example output::
 
-e.g.::
-
-    / $ ls -l /sys/bus/coresight/devices | grep dummy
+    $ ls -l /sys/bus/coresight/devices | grep dummy
     dummy_sink0 -> ../../../devices/platform/soc@0/soc@0:sink/dummy_sink0
     dummy_source0 -> ../../../devices/platform/soc@0/soc@0:source/dummy_source0

Thanks.

-- 
An old man doll... just what I always wanted! - Clara

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux