Current reclaim calculation for GRUB is a bit inaccurate and the
inaccuracy gets larger as the bandwidth of tasks becomes smaller.
I have a test program to show the issue - it runs one or more
deadline threads and observes the utilization. Following tests
are run on an isolated cpu(isolcpus=3) in a 4 cpu system and the
results as shown below:
RUN 1: runtime=7ms, deadline=period=10ms, RT capacity = 95%
TID[693]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 93.33
TID[693]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 93.35
TID[693]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 93.35
TID[693]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 93.29
RUN 2: runtime=2ms, deadline=period=10ms, RT capacity = 95%
TID[704]: RECLAIM=1, (r=2ms, d=10ms, p=10ms), Util: 79.96
TID[704]: RECLAIM=1, (r=2ms, d=10ms, p=10ms), Util: 80.06
TID[704]: RECLAIM=1, (r=2ms, d=10ms, p=10ms), Util: 80.00
RUN 3: runtime=1ms, deadline=period=100ms, RT capacity = 95%
TID[708]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 16.69
TID[708]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 16.69
TID[708]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 16.70
When running multiple tasks, the reclaimed bandwidth is divided
proportionately, but is not reclaimed to the max allowable limit:
RUN 4: 2 SCHED_FLAG_RECLAIM tasks, 1 normal task
Task 1: runtime=1ms, deadline=period=10ms
Task 2: runtime=1ms, deadline=period=10ms
Task 3: runtime=5ms, deadline=period=20ms(normal)
TID[624]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 20.10
TID[625]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 20.10
TID[626]: RECLAIM=0, (r=5ms, d=20ms, p=20ms), Util: 25.07
TID[624]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 20.06
TID[625]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 20.13
TID[626]: RECLAIM=0, (r=5ms, d=20ms, p=20ms), Util: 25.12
TID[624]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 19.95
TID[625]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 19.93
TID[626]: RECLAIM=0, (r=5ms, d=20ms, p=20ms), Util: 25.04
I have also tested multiple tasks on all cpus allowing for tasks to
migrate and see the same issue there as well. Running 10 tasks on 3
cpus with 6 SCHED_FLAG_RECLAIM and 4 normal tasks, top shows:
%Cpu0 : 70.1 us, 0.3 sy, 0.0 ni, 29.3 id, 0.0 wa
%Cpu1 : 69.1 us, 0.3 sy, 0.0 ni, 30.3 id, 0.3 wa
%Cpu2 : 70.5 us, 0.3 sy, 0.0 ni, 29.2 id, 0.0 wa
The max{} logic in the existing implementation seems to not fully
capture the GRUB algorithm.
This patch fixes the issue by appropriatley caping the max allowed
utilization and also slightly adjusting GRUB algorithm to account
for a mix of normal deadline and SCHED_FLAG_RECLAIM tasks.
According to the GRUB rule, the runtime is depreciated as a factor
of active bandwidth of the runqueue: "dq = -dt", where U is the
active bandwidth. Also, we do not allocate the full bandwidth of a
cpu to deadline task, but only a portion(Umax) to it, so as to avoid
deadline tasks starving lower class tasks. The equation could be
re-written as "dq = -(U / Umax) * dt".
Since both normal deadline and SCHED_FLAG_RECLAIM tasks can share
cpu, we need to consider bandwidth of only SCHED_FLAG_RECLAIM tasks
in the equation:
"dq = -(Ureclaim / Umax_reclaim) * dt"
Following are the results with this patch:
RUN 1: runtime=7ms, deadline=period=10ms, RT capacity = 95%
TID[616]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 94.98
TID[616]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 95.04
TID[616]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 95.01
RUN 2: runtime=2ms, deadline=period=10ms, RT capacity = 95%
TID[625]: RECLAIM=1, (r=2ms, d=10ms, p=10ms), Util: 95.00
TID[625]: RECLAIM=1, (r=2ms, d=10ms, p=10ms), Util: 95.01
TID[625]: RECLAIM=1, (r=2ms, d=10ms, p=10ms), Util: 94.99
RUN 3: runtime=1ms, deadline=period=100ms, RT capacity = 95%
TID[629]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 94.87
TID[629]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 95.03
TID[629]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 95.03
Also more results with multiple tasks.
RUN 4: 2 SCHED_FLAG RECLAIM tasks:
Task 1: runtime=1ms, deadline=period=10ms
Task 2: runtime=1ms, deadline=period=10ms
TID[633]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 47.53
TID[634]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 47.64
TID[633]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 47.52
TID[634]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 47.39
TID[633]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 47.59
TID[634]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 47.61
RUN 5: 2 SCHED_FLAG_RECLAIM tasks, 1 normal task
Task 1: runtime=1ms, deadline=period=10ms
Task 2: runtime=1ms, deadline=period=10ms
Task 3: runtime=5ms, deadline=period=20ms(normal)
TID[641]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 35.02
TID[642]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 35.02
TID[643]: RECLAIM=0, (r=5ms, d=20ms, p=20ms), Util: 24.93
TID[641]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 35.00
TID[642]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 34.94
TID[643]: RECLAIM=0, (r=5ms, d=20ms, p=20ms), Util: 24.98
TID[641]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 35.00
TID[642]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 35.03
TID[643]: RECLAIM=0, (r=5ms, d=20ms, p=20ms), Util: 25.03
Running tasks on all cpus allowing for migration also showed that
the utilization is reclaimed to the maximum. Running 10 tasks on
3 cpus with 6 SCHED_FLAG_RECLAIM and 4 normal tasks - top shows:
%Cpu0 : 94.3 us, 0.3 sy, 0.0 ni, 5.4 id, 0.0 wa
%Cpu1 : 95.2 us, 0.0 sy, 0.0 ni, 4.8 id, 0.0 wa
%Cpu2 : 94.9 us, 0.0 sy, 0.0 ni, 5.1 id, 0.0 wa
Signed-off-by: Vineeth Pillai (Google) <vineeth@xxxxxxxxxxxxxxx>
---
kernel/sched/deadline.c | 95 +++++++++++++++++++++++------------------
kernel/sched/sched.h | 21 +++++++--
2 files changed, 71 insertions(+), 45 deletions(-)
diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index 71b24371a6f7..17b2d87ea6fc 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -229,11 +229,13 @@ __dl_overflow(struct dl_bw *dl_b, unsigned long cap, u64 old_bw, u64 new_bw)
}
static inline
-void __add_running_bw(u64 dl_bw, struct dl_rq *dl_rq)
+void __add_running_bw(u64 dl_bw, struct dl_rq *dl_rq, bool reclaim_bw_se)
{
u64 old = dl_rq->running_bw;
lockdep_assert_rq_held(rq_of_dl_rq(dl_rq));
+ if (reclaim_bw_se)
+ dl_rq->reclaim_bw += dl_bw;
dl_rq->running_bw += dl_bw;
SCHED_WARN_ON(dl_rq->running_bw < old); /* overflow */
SCHED_WARN_ON(dl_rq->running_bw > dl_rq->this_bw);
@@ -242,15 +244,19 @@ void __add_running_bw(u64 dl_bw, struct dl_rq *dl_rq)
}
static inline
-void __sub_running_bw(u64 dl_bw, struct dl_rq *dl_rq)
+void __sub_running_bw(u64 dl_bw, struct dl_rq *dl_rq, bool reclaim_bw_se)
{
u64 old = dl_rq->running_bw;
lockdep_assert_rq_held(rq_of_dl_rq(dl_rq));
+ if (reclaim_bw_se)
+ dl_rq->reclaim_bw -= dl_bw;
dl_rq->running_bw -= dl_bw;
SCHED_WARN_ON(dl_rq->running_bw > old); /* underflow */
- if (dl_rq->running_bw > old)
+ if (dl_rq->running_bw > old) {
dl_rq->running_bw = 0;
+ dl_rq->reclaim_bw = 0;
+ }
/* kick cpufreq (see the comment in kernel/sched/sched.h). */
cpufreq_update_util(rq_of_dl_rq(dl_rq), 0);
}
@@ -296,14 +302,14 @@ static inline
void add_running_bw(struct sched_dl_entity *dl_se, struct dl_rq *dl_rq)
{
if (!dl_entity_is_special(dl_se))
- __add_running_bw(dl_se->dl_bw, dl_rq);
+ __add_running_bw(dl_se->dl_bw, dl_rq, dl_entity_is_reclaim(dl_se));
}
static inline
void sub_running_bw(struct sched_dl_entity *dl_se, struct dl_rq *dl_rq)
{
if (!dl_entity_is_special(dl_se))
- __sub_running_bw(dl_se->dl_bw, dl_rq);
+ __sub_running_bw(dl_se->dl_bw, dl_rq, dl_entity_is_reclaim(dl_se));
}
static void dl_change_utilization(struct task_struct *p, u64 new_bw)
@@ -522,6 +528,7 @@ void init_dl_rq(struct dl_rq *dl_rq)
#endif
dl_rq->running_bw = 0;
+ dl_rq->reclaim_bw = 0;
dl_rq->this_bw = 0;
init_dl_rq_bw_ratio(dl_rq);
}
@@ -1260,44 +1267,51 @@ int dl_runtime_exceeded(struct sched_dl_entity *dl_se)
}
/*
- * This function implements the GRUB accounting rule:
- * according to the GRUB reclaiming algorithm, the runtime is
- * not decreased as "dq = -dt", but as
- * "dq = -max{u / Umax, (1 - Uinact - Uextra)} dt",
- * where u is the utilization of the task, Umax is the maximum reclaimable
- * utilization, Uinact is the (per-runqueue) inactive utilization, computed
- * as the difference between the "total runqueue utilization" and the
- * runqueue active utilization, and Uextra is the (per runqueue) extra
- * reclaimable utilization.
- * Since rq->dl.running_bw and rq->dl.this_bw contain utilizations
- * multiplied by 2^BW_SHIFT, the result has to be shifted right by
- * BW_SHIFT.
- * Since rq->dl.bw_ratio contains 1 / Umax multiplied by 2^RATIO_SHIFT,
- * dl_bw is multiped by rq->dl.bw_ratio and shifted right by RATIO_SHIFT.
- * Since delta is a 64 bit variable, to have an overflow its value
- * should be larger than 2^(64 - 20 - 8), which is more than 64 seconds.
- * So, overflow is not an issue here.
+ * This function implements a slightly modified version of the GRUB accounting
+ * rule to accommodate mix of normal deadline tasks and SCHED_FLAG_RECLAIM tasks
+ * running together:
+ * As per the GRUB rule, the runtime is not decreased as "dq = -dt", but as a
+ * factor of the running(active) bandwidth for a cpu:
+ * "dq = -U * dt"
+ * In our case, deadline is not allowed to use the whole bandwidth of the cpu,
+ * but only a fraction of it: "Umax". So the equation becomes:
+ * "dq = -(U / Umax) * dt"
+ *
+ * To account for the fact that we have a mix of normal deadline tasks and
+ * SCHED_RECLAIM_FLAG tasks running together, we do not consider the bandwidth
+ * of normal tasks in the equation. So
+ * "dq = -(Ureclaim / Umax_reclaim) * dt"
+ * Where
+ * Ureclaim: Active Bandwidth of SCHED_FLAG_RECLAIM tasks for this rq.
+ * Umax_reclaim: Maximum reclaimable bandwidth for this rq.
+ *
+ * We can calculate Umax_reclaim as:
+ * Umax_reclaim: this_bw + Uinact + Ureclaim
+ * Where:
+ * this_bw: Reserved bandwidth for this runqueue.
+ * Ureclaim: Active Bandwidth of SCHED_FLAG_RECLAIM tasks for this rq.
+ * Uinact: Inactive utilization (this_bw - running_bw)
+ * Uextra: Extra bandwidth(Usually Umax - this_bw)
+ * Umax: Max usable bandwidth. Currently
+ * = sched_rt_runtime_us / sched_rt_period_us
+ *
+ * We use the above formula to scale the runtime down
+ *
+ * dq = -(Ureclaim / Umax_reclaim) * dt
+ * = -(Ureclaim / (Ureclaim + Uextra + Uinact)) * dt
*/
static u64 grub_reclaim(u64 delta, struct rq *rq, struct sched_dl_entity *dl_se)
{
+ u64 scaled_delta;
u64 u_inact = rq->dl.this_bw - rq->dl.running_bw; /* Utot - Uact */
- u64 u_act;
- u64 u_act_min = (dl_se->dl_bw * rq->dl.bw_ratio) >> RATIO_SHIFT;
+ u64 reclaimable_bw = rq->dl.extra_bw + u_inact;
- /*
- * Instead of computing max{u * bw_ratio, (1 - u_inact - u_extra)},
- * we compare u_inact + rq->dl.extra_bw with
- * 1 - (u * rq->dl.bw_ratio >> RATIO_SHIFT), because
- * u_inact + rq->dl.extra_bw can be larger than
- * 1 * (so, 1 - u_inact - rq->dl.extra_bw would be negative
- * leading to wrong results)
- */
- if (u_inact + rq->dl.extra_bw > BW_UNIT - u_act_min)
- u_act = u_act_min;
- else
- u_act = BW_UNIT - u_inact - rq->dl.extra_bw;
+ if (reclaimable_bw > rq->dl.max_bw)
+ reclaimable_bw = rq->dl.max_bw;
- return (delta * u_act) >> BW_SHIFT;
+ scaled_delta = div64_u64(delta * rq->dl.reclaim_bw,
+ (rq->dl.reclaim_bw + reclaimable_bw));
+ return scaled_delta;
}
/*
@@ -2783,12 +2797,9 @@ int sched_dl_global_validate(void)
static void init_dl_rq_bw_ratio(struct dl_rq *dl_rq)
{
if (global_rt_runtime() == RUNTIME_INF) {
- dl_rq->bw_ratio = 1 << RATIO_SHIFT;
- dl_rq->extra_bw = 1 << BW_SHIFT;
+ dl_rq->max_bw = dl_rq->extra_bw = 1 << BW_SHIFT;
} else {
- dl_rq->bw_ratio = to_ratio(global_rt_runtime(),
- global_rt_period()) >> (BW_SHIFT - RATIO_SHIFT);
- dl_rq->extra_bw = to_ratio(global_rt_period(),
+ dl_rq->max_bw = dl_rq->extra_bw = to_ratio(global_rt_period(),
global_rt_runtime());
}
}
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 3e8df6d31c1e..13d85af0f42b 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -257,6 +257,11 @@ static inline bool dl_entity_is_special(const struct sched_dl_entity *dl_se)
#endif
}
+static inline bool dl_entity_is_reclaim(const struct sched_dl_entity *dl_se)
+{
+ return dl_se->flags & SCHED_FLAG_RECLAIM;
+}
+
/*
* Tells if entity @a should preempt entity @b.
*/
@@ -754,10 +759,20 @@ struct dl_rq {
u64 extra_bw;
/*
- * Inverse of the fraction of CPU utilization that can be reclaimed
- * by the GRUB algorithm.
+ * Maximum available bandwidth for this runqueue. This is used to
+ * calculate reclaimable bandwidth for SCHED_FLAG_RECLAIM tasks.
+ * By restricting maximum usable bandwidth, we aim to give other
+ * tasks on lower classes a chance to run, when competing with
+ * SCHED_FLAG_RECLAIM tasks.
*/
- u64 bw_ratio;
+ u64 max_bw;
+
+ /*
+ * Active bandwidth of SCHED_FLAG_RECLAIM tasks on this rq.
+ * This will be a subset of running_bw.
+ */
+ u64 reclaim_bw;
+
};
#ifdef CONFIG_FAIR_GROUP_SCHED
--
2.40.1
