Re: [PATCH v9 1/1] riscv: Allow to downgrade paging mode from the command line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 28 Mar 2023 22:09:51 PDT (-0700), alexghiti@xxxxxxxxxxxx wrote:
Add 2 early command line parameters that allow to downgrade satp mode
(using the same naming as x86):
- "no5lvl": use a 4-level page table (down from sv57 to sv48)
- "no4lvl": use a 3-level page table (down from sv57/sv48 to sv39)

Note that going through the device tree to get the kernel command line
works with ACPI too since the efi stub creates a device tree anyway with
the command line.

In KASAN kernels, we can't use the libfdt that early in the boot process
since we are not ready to execute instrumented functions. So instead of
using the "generic" libfdt, we compile our own versions of those functions
that are not instrumented and that are prefixed so that they do not
conflict with the generic ones. We also need the non-instrumented versions
of the string functions and the prefixed versions of memcpy/memmove.

This is largely inspired by commit aacd149b6238 ("arm64: head: avoid
relocating the kernel twice for KASLR") from which I removed compilation
flags that were not relevant to RISC-V at the moment (LTO, SCS, pie).

Signed-off-by: Alexandre Ghiti <alexghiti@xxxxxxxxxxxx>
Tested-by: Björn Töpel <bjorn@xxxxxxxxxxxx>
Reviewed-by: Björn Töpel <bjorn@xxxxxxxxxxxx>
---
 .../admin-guide/kernel-parameters.txt         |  5 +-
 arch/riscv/kernel/Makefile                    |  2 +
 arch/riscv/kernel/pi/Makefile                 | 39 ++++++++++++
 arch/riscv/kernel/pi/cmdline_early.c          | 62 +++++++++++++++++++
 arch/riscv/kernel/vmlinux.lds.S               |  8 +++
 arch/riscv/lib/memcpy.S                       |  2 +
 arch/riscv/lib/memmove.S                      |  2 +
 arch/riscv/lib/strlen.S                       |  1 +
 arch/riscv/mm/init.c                          | 36 +++++++++--
 9 files changed, 150 insertions(+), 7 deletions(-)
 create mode 100644 arch/riscv/kernel/pi/Makefile
 create mode 100644 arch/riscv/kernel/pi/cmdline_early.c

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 6221a1d057dd..accc400b43f1 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3576,7 +3576,10 @@
 			emulation library even if a 387 maths coprocessor
 			is present.

-	no5lvl		[X86-64] Disable 5-level paging mode. Forces
+	no4lvl		[RISCV] Disable 4-level and 5-level paging modes. Forces
+			kernel to use 3-level paging instead.
+
+	no5lvl		[X86-64,RISCV] Disable 5-level paging mode. Forces
 			kernel to use 4-level paging instead.

 	nofsgsbase	[X86] Disables FSGSBASE instructions.
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 4cf303a779ab..aa22f87faeae 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -89,3 +89,5 @@ obj-$(CONFIG_EFI)		+= efi.o
 obj-$(CONFIG_COMPAT)		+= compat_syscall_table.o
 obj-$(CONFIG_COMPAT)		+= compat_signal.o
 obj-$(CONFIG_COMPAT)		+= compat_vdso/
+
+obj-$(CONFIG_64BIT)		+= pi/
diff --git a/arch/riscv/kernel/pi/Makefile b/arch/riscv/kernel/pi/Makefile
new file mode 100644
index 000000000000..42c58f4ab53b
--- /dev/null
+++ b/arch/riscv/kernel/pi/Makefile
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+# This file was copied from arm64/kernel/pi/Makefile.
+
+KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
+		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
+		   $(call cc-option,-mbranch-protection=none) \
+		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+		   -D__DISABLE_EXPORTS -ffreestanding \
+		   -fno-asynchronous-unwind-tables -fno-unwind-tables \
+		   $(call cc-option,-fno-addrsig)
+
+KBUILD_CFLAGS	+= -mcmodel=medany
+
+CFLAGS_cmdline_early.o += -D__NO_FORTIFY
+CFLAGS_lib-fdt_ro.o += -D__NO_FORTIFY
+
+GCOV_PROFILE	:= n
+KASAN_SANITIZE	:= n
+KCSAN_SANITIZE	:= n
+UBSAN_SANITIZE	:= n
+KCOV_INSTRUMENT	:= n
+
+$(obj)/%.pi.o: OBJCOPYFLAGS := --prefix-symbols=__pi_ \
+			       --remove-section=.note.gnu.property \
+			       --prefix-alloc-sections=.init
+$(obj)/%.pi.o: $(obj)/%.o FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
+	$(call if_changed_rule,cc_o_c)
+
+$(obj)/string.o: $(srctree)/lib/string.c FORCE
+	$(call if_changed_rule,cc_o_c)
+
+$(obj)/ctype.o: $(srctree)/lib/ctype.c FORCE
+	$(call if_changed_rule,cc_o_c)
+
+obj-y		:= cmdline_early.pi.o string.pi.o ctype.pi.o lib-fdt.pi.o lib-fdt_ro.pi.o
+extra-y		:= $(patsubst %.pi.o,%.o,$(obj-y))
diff --git a/arch/riscv/kernel/pi/cmdline_early.c b/arch/riscv/kernel/pi/cmdline_early.c
new file mode 100644
index 000000000000..05652d13c746
--- /dev/null
+++ b/arch/riscv/kernel/pi/cmdline_early.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/libfdt.h>
+#include <linux/string.h>
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+
+static char early_cmdline[COMMAND_LINE_SIZE];
+
+/*
+ * Declare the functions that are exported (but prefixed) here so that LLVM
+ * does not complain it lacks the 'static' keyword (which, if added, makes
+ * LLVM complain because the function is actually unused in this file).
+ */
+u64 set_satp_mode_from_cmdline(uintptr_t dtb_pa);
+
+static char *get_early_cmdline(uintptr_t dtb_pa)
+{
+	const char *fdt_cmdline = NULL;
+	unsigned int fdt_cmdline_size = 0;
+	int chosen_node;
+
+	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
+		chosen_node = fdt_path_offset((void *)dtb_pa, "/chosen");
+		if (chosen_node >= 0) {
+			fdt_cmdline = fdt_getprop((void *)dtb_pa, chosen_node,
+						  "bootargs", NULL);
+			if (fdt_cmdline) {
+				fdt_cmdline_size = strlen(fdt_cmdline);
+				strscpy(early_cmdline, fdt_cmdline,
+					COMMAND_LINE_SIZE);
+			}
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
+	    IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
+	    fdt_cmdline_size == 0 /* CONFIG_CMDLINE_FALLBACK */) {
+		strncat(early_cmdline, CONFIG_CMDLINE,
+			COMMAND_LINE_SIZE - fdt_cmdline_size);
+	}
+
+	return early_cmdline;
+}
+
+static u64 match_noXlvl(char *cmdline)
+{
+	if (strstr(cmdline, "no4lvl"))
+		return SATP_MODE_48;
+	else if (strstr(cmdline, "no5lvl"))
+		return SATP_MODE_57;
+
+	return 0;
+}
+
+u64 set_satp_mode_from_cmdline(uintptr_t dtb_pa)
+{
+	char *cmdline = get_early_cmdline(dtb_pa);
+
+	return match_noXlvl(cmdline);
+}
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 615ff5842690..b12a843ad426 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -83,6 +83,14 @@ SECTIONS
 	/* Start of init data section */
 	__init_data_begin = .;
 	INIT_DATA_SECTION(16)
+
+	/* Those sections result from the compilation of kernel/pi/string.c */
+	.init.pidata : {
+		*(.init.srodata.cst8*)
+		*(.init__bug_table*)
+		*(.init.sdata*)
+	}
+
 	.init.bss : {
 		*(.init.bss)	/* from the EFI stub */
 	}
diff --git a/arch/riscv/lib/memcpy.S b/arch/riscv/lib/memcpy.S
index 51ab716253fa..1a40d01a9543 100644
--- a/arch/riscv/lib/memcpy.S
+++ b/arch/riscv/lib/memcpy.S
@@ -106,3 +106,5 @@ WEAK(memcpy)
 6:
 	ret
 END(__memcpy)
+SYM_FUNC_ALIAS(__pi_memcpy, __memcpy)
+SYM_FUNC_ALIAS(__pi___memcpy, __memcpy)
diff --git a/arch/riscv/lib/memmove.S b/arch/riscv/lib/memmove.S
index e0609e1f0864..838ff2022fe3 100644
--- a/arch/riscv/lib/memmove.S
+++ b/arch/riscv/lib/memmove.S
@@ -314,3 +314,5 @@ return_from_memmove:

 SYM_FUNC_END(memmove)
 SYM_FUNC_END(__memmove)
+SYM_FUNC_ALIAS(__pi_memmove, __memmove)
+SYM_FUNC_ALIAS(__pi___memmove, __memmove)
diff --git a/arch/riscv/lib/strlen.S b/arch/riscv/lib/strlen.S
index 15bb8f3aa959..9d0055616f7b 100644
--- a/arch/riscv/lib/strlen.S
+++ b/arch/riscv/lib/strlen.S
@@ -131,3 +131,4 @@ strlen_zbb:
 .option pop
 #endif
 SYM_FUNC_END(strlen)
+SYM_FUNC_ALIAS(__pi_strlen, strlen)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index bce899b180cd..3ad771571c2d 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -746,6 +746,8 @@ static __init pgprot_t pgprot_from_va(uintptr_t va)
 #endif /* CONFIG_STRICT_KERNEL_RWX */

 #if defined(CONFIG_64BIT) && !defined(CONFIG_XIP_KERNEL)
+u64 __pi_set_satp_mode_from_cmdline(uintptr_t dtb_pa);
+
 static void __init disable_pgtable_l5(void)
 {
 	pgtable_l5_enabled = false;
@@ -760,17 +762,39 @@ static void __init disable_pgtable_l4(void)
 	satp_mode = SATP_MODE_39;
 }

+static int __init print_no4lvl(char *p)
+{
+	pr_info("Disabled 4-level and 5-level paging");
+	return 0;
+}
+early_param("no4lvl", print_no4lvl);
+
+static int __init print_no5lvl(char *p)
+{
+	pr_info("Disabled 5-level paging");
+	return 0;
+}
+early_param("no5lvl", print_no5lvl);
+
 /*
  * There is a simple way to determine if 4-level is supported by the
  * underlying hardware: establish 1:1 mapping in 4-level page table mode
  * then read SATP to see if the configuration was taken into account
  * meaning sv48 is supported.
  */
-static __init void set_satp_mode(void)
+static __init void set_satp_mode(uintptr_t dtb_pa)
 {
 	u64 identity_satp, hw_satp;
 	uintptr_t set_satp_mode_pmd = ((unsigned long)set_satp_mode) & PMD_MASK;
-	bool check_l4 = false;
+	u64 satp_mode_cmdline = __pi_set_satp_mode_from_cmdline(dtb_pa);
+
+	if (satp_mode_cmdline == SATP_MODE_57) {
+		disable_pgtable_l5();
+	} else if (satp_mode_cmdline == SATP_MODE_48) {
+		disable_pgtable_l5();
+		disable_pgtable_l4();
+		return;
+	}

 	create_p4d_mapping(early_p4d,
 			set_satp_mode_pmd, (uintptr_t)early_pud,
@@ -789,7 +813,8 @@ static __init void set_satp_mode(void)
 retry:
 	create_pgd_mapping(early_pg_dir,
 			   set_satp_mode_pmd,
-			   check_l4 ? (uintptr_t)early_pud : (uintptr_t)early_p4d,
+			   pgtable_l5_enabled ?
+				(uintptr_t)early_p4d : (uintptr_t)early_pud,
 			   PGDIR_SIZE, PAGE_TABLE);

 	identity_satp = PFN_DOWN((uintptr_t)&early_pg_dir) | satp_mode;
@@ -800,9 +825,8 @@ static __init void set_satp_mode(void)
 	local_flush_tlb_all();

 	if (hw_satp != identity_satp) {
-		if (!check_l4) {
+		if (pgtable_l5_enabled) {
 			disable_pgtable_l5();
-			check_l4 = true;
 			memset(early_pg_dir, 0, PAGE_SIZE);
 			goto retry;
 		}
@@ -1031,7 +1055,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 #endif

 #if defined(CONFIG_64BIT) && !defined(CONFIG_XIP_KERNEL)
-	set_satp_mode();
+	set_satp_mode(dtb_pa);
 #endif

 	/*

Alex found that we're missing -fpie, which was causing the LLVM boot failures. I'm just going to squash in

diff --git a/arch/riscv/kernel/pi/Makefile b/arch/riscv/kernel/pi/Makefile
index 42c58f4ab53b..5d7cb991f2b8 100644
--- a/arch/riscv/kernel/pi/Makefile
+++ b/arch/riscv/kernel/pi/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
# This file was copied from arm64/kernel/pi/Makefile.

-KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
+KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
		   $(call cc-option,-mbranch-protection=none) \
		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux