[PATCH 1/2] ARM: OMAP4: Tablet: Add BMA180 sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Oleksandr Kravchenko <o.v.kravchenko@xxxxxxxxxxxxxxx>

Add Bosch BMA180 acceleration sensor devicetree

Signed-off-by: Oleksandr Kravchenko <o.v.kravchenko@xxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/omap4-sdp.dts |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index c9022df..13d8279 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -170,6 +170,7 @@
 			&dss_hdmi_pins
 			&tpd12s015_pins
 			&apds9300_pins
+			&bma180_pins
 	>;
 
 	uart2_pins: pinmux_uart2_pins {
@@ -305,6 +306,12 @@
 			0x50 (PIN_INPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_61 */
 		>;
 	};
+
+	bma180_pins: pinmux_bma180_pins {
+		pinctrl-single,pins = <
+		0x156 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_nbe1.gpio_178 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -405,6 +412,17 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 8>; /* gpio line 61, low triggered */
 	};
+
+	bma180@40 {
+		compatible = "bosch,bma180";
+		reg = <0x40>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		range = <2>;
+		bw = <5>;
+		mode_config = <1>;
+		fuzz = <555>;
+	};
 };
 
 &mcspi1 {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux