On Mon, 2023-03-20 at 14:45 +0300, Paul Fertser wrote:
> Hello,
>
> We are seeing wrong DTS temperatures on at least "Intel(R) Xeon(R)
> Bronze 3204 CPU @ 1.90GHz" and most probably other Skylake Xeon CPUs
> are also affected, see inline.
>
> On Tue, Feb 08, 2022 at 04:36:36PM +0100, Iwona Winiarska wrote:
> > Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal
> > readings of the processor package and processor cores that are
> > accessible via the PECI interface.
> ...
> > +static const struct cpu_info cpu_hsx = {
> > + .reg = &resolved_cores_reg_hsx,
> > + .min_peci_revision = 0x33,
> > + .thermal_margin_to_millidegree =
> > &dts_eight_dot_eight_to_millidegree,
> > +};
> > +
> > +static const struct cpu_info cpu_icx = {
> > + .reg = &resolved_cores_reg_icx,
> > + .min_peci_revision = 0x40,
> > + .thermal_margin_to_millidegree = &dts_ten_dot_six_to_millidegree,
> > +};
> ...
> > + {
> > + .name = "peci_cpu.cputemp.skx",
> > + .driver_data = (kernel_ulong_t)&cpu_hsx,
> > + },
>
> With this configuration we get this data:
>
> /sys/bus/peci/devices/0-30/peci_cpu.cputemp.skx.48/hwmon/hwmon15# grep .
> temp[123]_{label,input}
> temp1_label:Die
> temp2_label:DTS
> temp3_label:Tcontrol
> temp1_input:30938
> temp2_input:67735
> temp3_input:80000
>
> On the host system "sensors" report
>
> Package id 0: +31.C (high = +80.C, crit = +90.C)
>
> So I conclude Die temperature as retrieved over PECI is correct while
> DTS is mis-calculated. The old downstream code in OpenBMC was using
> ten_dot_six_to_millidegree() function for conversion, and that was
> providing expected results. And indeed if we reverse the calculation
> here we get 80000 - ((80000-67735) * 256 / 64) = 30940 which matches
> expectations.
>
Hi!
Thanks for the report.
It was changed between v2 and v3 after a report about negative temperature on
pre-ICX platforms:
https://lore.kernel.org/lkml/6891496eabcc6f9cacec4fea505fb757ea9c11fc.camel@xxxxxxxxx/
Unfortunately, I'm not able to test this on Cascade Lake X (or any other pre-ICX
platform).
I just sent a patch that changes SKX to use S10.6 format:
https://lore.kernel.org/lkml/20230321090410.866766-1-iwona.winiarska@xxxxxxxxx/
Thanks
-Iwona
