Re: [PATCH v3] rcu: Add a minimum time for marking boot as completed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 03, 2023 at 09:38:51PM +0000, Joel Fernandes (Google) wrote:
> On many systems, a great deal of boot (in userspace) happens after the
> kernel thinks the boot has completed. It is difficult to determine if
> the system has really booted from the kernel side. Some features like
> lazy-RCU can risk slowing down boot time if, say, a callback has been
> added that the boot synchronously depends on. Further expedited callbacks
> can get unexpedited way earlier than it should be, thus slowing down
> boot (as shown in the data below).
> 
> For these reasons, this commit adds a config option
> 'CONFIG_RCU_BOOT_END_DELAY' and a boot parameter rcupdate.boot_end_delay.
> Userspace can also make RCU's view of the system as booted, by writing the
> time in milliseconds to: /sys/module/rcupdate/parameters/rcu_boot_end_delay
> Or even just writing a value of 0 to this sysfs node.
> However, under no circumstance will the boot be allowed to end earlier
> than just before init is launched.
> 
> The default value of CONFIG_RCU_BOOT_END_DELAY is chosen as 15s. This
> suites ChromeOS and also a PREEMPT_RT system below very well, which need
> no config or parameter changes, and just a simple application of this patch. A
> system designer can also choose a specific value here to keep RCU from marking
> boot completion.  As noted earlier, RCU's perspective of the system as booted
> will not be marker until at least rcu_boot_end_delay milliseconds have passed
> or an update is made via writing a small value (or 0) in milliseconds to:
> /sys/module/rcupdate/parameters/rcu_boot_end_delay.
> 
> One side-effect of this patch is, there is a risk that a real-time workload
> launched just after the kernel boots will suffer interruptions due to expedited
> RCU, which previous ended just before init was launched. However, to mitigate
> such an issue (however unlikely), the user should either tune
> CONFIG_RCU_BOOT_END_DELAY to a smaller value than 15 seconds or write a value
> of 0 to /sys/module/rcupdate/parameters/rcu_boot_end_delay, once userspace
> boots, and before launching the real-time workload.
> 
> Qiuxu also noted impressive boot-time improvements with earlier version
> of patch. An excerpt from the data he shared:
> 
> 1) Testing environment:
>     OS            : CentOS Stream 8 (non-RT OS)
>     Kernel     : v6.2
>     Machine : Intel Cascade Lake server (2 sockets, each with 44 logical threads)
>     Qemu  args  : -cpu host -enable-kvm, -smp 88,threads=2,sockets=2, …
> 
> 2) OS boot time definition:
>     The time from the start of the kernel boot to the shell command line
>     prompt is shown from the console. [ Different people may have
>     different OS boot time definitions. ]
> 
> 3) Measurement method (very rough method):
>     A timer in the kernel periodically prints the boot time every 100ms.
>     As soon as the shell command line prompt is shown from the console,
>     we record the boot time printed by the timer, then the printed boot
>     time is the OS boot time.
> 
> 4) Measured OS boot time (in seconds)
>    a) Measured 10 times w/o this patch:
>         8.7s, 8.4s, 8.6s, 8.2s, 9.0s, 8.7s, 8.8s, 9.3s, 8.8s, 8.3s
>         The average OS boot time was: ~8.7s
> 
>    b) Measure 10 times w/ this patch:
>         8.5s, 8.2s, 7.6s, 8.2s, 8.7s, 8.2s, 7.8s, 8.2s, 9.3s, 8.4s
>         The average OS boot time was: ~8.3s.
> 
> Tested-by: Qiuxu Zhuo <qiuxu.zhuo@xxxxxxxxx>
> Signed-off-by: Joel Fernandes (Google) <joel@xxxxxxxxxxxxxxxxx>
> ---
> v1->v2:
> 	Update some comments and description.
> v2->v3:
>         Add sysfs param, and update with Test data.
> 
>  .../admin-guide/kernel-parameters.txt         | 12 ++++
>  cc_list                                       |  8 +++
>  kernel/rcu/Kconfig                            | 19 ++++++
>  kernel/rcu/update.c                           | 68 ++++++++++++++++++-
>  4 files changed, 106 insertions(+), 1 deletion(-)
>  create mode 100644 cc_list
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 2429b5e3184b..611de90d9c13 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -5085,6 +5085,18 @@
>  	rcutorture.verbose= [KNL]
>  			Enable additional printk() statements.
>  
> +	rcupdate.rcu_boot_end_delay= [KNL]
> +			Minimum time in milliseconds that must elapse
> +			before the boot sequence can be marked complete
> +			from RCU's perspective, after which RCU's behavior
> +			becomes more relaxed. The default value is also
> +			configurable via CONFIG_RCU_BOOT_END_DELAY.
> +			Userspace can also mark the boot as completed
> +			sooner by writing the time in milliseconds, say once
> +			userspace considers the system as booted, to:
> +			/sys/module/rcupdate/parameters/rcu_boot_end_delay
> +			Or even just writing a value of 0 to this sysfs node.
> +
>  	rcupdate.rcu_cpu_stall_ftrace_dump= [KNL]
>  			Dump ftrace buffer after reporting RCU CPU
>  			stall warning.
> diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
> index 9071182b1284..4b5ffa36cbaf 100644
> --- a/kernel/rcu/Kconfig
> +++ b/kernel/rcu/Kconfig
> @@ -217,6 +217,25 @@ config RCU_BOOST_DELAY
>  
>  	  Accept the default if unsure.
>  
> +config RCU_BOOT_END_DELAY
> +	int "Minimum time before RCU may consider in-kernel boot as completed"
> +	range 0 120000
> +	default 15000
> +	help
> +	  Default value of the minimum time in milliseconds that must elapse
> +	  before the boot sequence can be marked complete from RCU's perspective,
> +	  after which RCU's behavior becomes more relaxed.
> +	  Userspace can also mark the boot as completed sooner than this default
> +	  by writing the time in milliseconds, say once userspace considers
> +	  the system as booted, to: /sys/module/rcupdate/parameters/rcu_boot_end_delay.
> +	  Or even just writing a value of 0 to this sysfs node.
> +
> +	  The actual delay for RCU's view of the system to be marked as booted can be
> +	  higher than this value if the kernel takes a long time to initialize but it
> +	  will never be smaller than this value.
> +
> +	  Accept the default if unsure.
> +
>  config RCU_EXP_KTHREAD
>  	bool "Perform RCU expedited work in a real-time kthread"
>  	depends on RCU_BOOST && RCU_EXPERT
> diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
> index 19bf6fa3ee6a..93138c92136e 100644
> --- a/kernel/rcu/update.c
> +++ b/kernel/rcu/update.c
> @@ -224,18 +224,84 @@ void rcu_unexpedite_gp(void)
>  }
>  EXPORT_SYMBOL_GPL(rcu_unexpedite_gp);
>  
> +/*
> + * Minimum time in milliseconds until RCU can consider in-kernel boot as
> + * completed.  This can also be tuned at runtime to end the boot earlier, by
> + * userspace init code writing the time in milliseconds (even 0) to:
> + * /sys/module/rcupdate/parameters/rcu_boot_end_delay
> + */
> +static int rcu_boot_end_delay = CONFIG_RCU_BOOT_END_DELAY;
> +
>  static bool rcu_boot_ended __read_mostly;
> +static bool rcu_boot_end_called __read_mostly;
> +static DEFINE_MUTEX(rcu_boot_end_lock);
> +
> +static int param_set_rcu_boot_end(const char *val, const struct kernel_param *kp)
> +{
> +	uint end_ms;
> +	int ret = kstrtouint(val, 0, &end_ms);
> +
> +	if (ret)
> +		return ret;
> +	WRITE_ONCE(*(uint *)kp->arg, end_ms);
> +
> +	/*
> +	 * rcu_end_inkernel_boot() should be called at least once during init
> +	 * before we can allow param changes to end the boot.
> +	 */
> +	mutex_lock(&rcu_boot_end_lock);
> +	rcu_boot_end_delay = end_ms;
> +	if (!rcu_boot_ended && rcu_boot_end_called) {
> +		mutex_unlock(&rcu_boot_end_lock);
> +		rcu_end_inkernel_boot();
> +	}
> +	mutex_unlock(&rcu_boot_end_lock);
> +	return ret;
> +}
> +
> +static const struct kernel_param_ops rcu_boot_end_ops = {
> +	.set = param_set_rcu_boot_end,
> +	.get = param_get_uint,
> +};
> +module_param_cb(rcu_boot_end_delay, &rcu_boot_end_ops, &rcu_boot_end_delay, 0644);
>  
>  /*
> - * Inform RCU of the end of the in-kernel boot sequence.
> + * Inform RCU of the end of the in-kernel boot sequence. The boot sequence will
> + * not be marked ended until at least rcu_boot_end_delay milliseconds have passed.
>   */
> +void rcu_end_inkernel_boot(void);
> +static void rcu_boot_end_work_fn(struct work_struct *work)
> +{
> +	rcu_end_inkernel_boot();
> +}
> +static DECLARE_DELAYED_WORK(rcu_boot_end_work, rcu_boot_end_work_fn);
> +
>  void rcu_end_inkernel_boot(void)
>  {
> +	mutex_lock(&rcu_boot_end_lock);
> +	rcu_boot_end_called = true;
> +
> +	if (rcu_boot_ended)
> +		return;
> +
> +	if (rcu_boot_end_delay) {
> +		u64 boot_ms = div_u64(ktime_get_boot_fast_ns(), 1000000UL);
> +
> +		if (boot_ms < rcu_boot_end_delay) {
> +			schedule_delayed_work(&rcu_boot_end_work,
> +					rcu_boot_end_delay - boot_ms);
<snip>
urezki@pc638:~/data/raid0/coding/linux-rcu.git$ git diff
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index 93138c92136e..93f426f0f4ec 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -289,7 +289,7 @@ void rcu_end_inkernel_boot(void)
 
                if (boot_ms < rcu_boot_end_delay) {
                        schedule_delayed_work(&rcu_boot_end_work,
-                                       rcu_boot_end_delay - boot_ms);
+                               msecs_to_jiffies(rcu_boot_end_delay - boot_ms));
                        mutex_unlock(&rcu_boot_end_lock);
                        return;
                }
urezki@pc638:~/data/raid0/coding/linux-rcu.git$
<snip>

I think you need to apply above patch. I am not sure maybe Paul
has already mentioned about it. But just in case.

--
Uladzislau Rezki



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux