On Wed, Jul 24, 2013 at 06:07:18PM +0800, Robin Gong wrote:
> On Wed, Jul 24, 2013 at 10:30:41AM +0200, Steffen Trumtrar wrote:
> > Hi!
> >
> > I tested your patch and had to change two things to actually make it
> > work. See below...
> >
> > On Sun, Jul 21, 2013 at 05:17:27PM +0800, Robin Gong wrote:
> > > Add pfuze100 regulator driver.
> > >
> > > Signed-off-by: Robin Gong <b38343@xxxxxxxxxxxxx>
> >
> > (...)
> >
> > > ---
> >
> > > diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
> > > new file mode 100644
> > > index 0000000..fd259ef
> > > --- /dev/null
> > > +++ b/drivers/regulator/pfuze100-regulator.c
> > > @@ -0,0 +1,462 @@
> >
> > (...)
> >
> > > +static struct regulator_ops pfuze100_ldo_regulator_ops = {
> > > + .enable = regulator_enable_regmap,
> > > + .disable = regulator_disable_regmap,
> > > + .is_enabled = regulator_is_enabled_regmap,
> > > + .list_voltage = regulator_list_voltage_linear,
> > > + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> > > + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> > > +};
> > > +
> > > +static struct regulator_ops pfuze100_fixed_regulator_ops = {
> > > + .list_voltage = regulator_list_voltage_linear,
> > > +};
> >
> >
> > This needs:
> >
> > diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
> > index 07d5a54..d0d67b4 100644
> > --- a/drivers/regulator/pfuze100-regulator.c
> > +++ b/drivers/regulator/pfuze100-regulator.c
> > @@ -133,6 +133,7 @@ static struct regulator_ops pfuze100_ldo_regulator_ops = {
> >
> > static struct regulator_ops pfuze100_fixed_regulator_ops = {
> > .list_voltage = regulator_list_voltage_linear,
> > + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> > };
> >
> > static struct regulator_ops pfuze100_sw_regulator_ops = {
> >
> >
> > Otherwise the fixed_regulator VDDR isn't registered and the driver then unloads
> > completely. This is at least the case for v3.10. I haven't had the chance to test
> > it on v3.11-rcX. If the _regulator_do_set_voltage logic changes, then scratch this.
> >
> Thanks firstly for you test with the patch. I have test it on v3.10 just now,
> and can't reproduce what you saw that VDDR regulator can't be registered
> successfully. I don't think fixed regulator need <set_voltage_sel>.
Okay. I rechecked and I was doing it wrong. I had the min/max voltage propreties
in the DT and missed the "regulator-boot-on;" property. Works fine now.
Thanks,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
