Re: [RFC 0/2] RISC-V: enable rust

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Conor,

On Fri, Feb 24, 2023 at 2:37 PM Conor Dooley <conor.dooley@xxxxxxxxxxxxx> wrote:
>
> This is a somewhat blind (and maybe foolish) attempt at enabling Rust
> for RISC-V. I've tested this on Icicle, and the modules seem to work.
> I'd like to play around with Rust on RISC-V, but I'm not interested in
> using downstream kernels, so figured I should try and see what's
> missing...
> I've tagged this as RFC in case I've missed some "WAaaaa you can't do
> this" somewhere :)

Thanks for sending this and taking the lead on RISC-V -- I appreciate
you put me as the author, but in this case, it was actually Gary that
started the RISC-V port [1], and then I sent three PRs on top later
on.

When submitting something on behalf of somebody else, I suggest being
very careful and ideally contacting the authors beforehand. In
particular, if there has been any modification (including to the
commit message), then a note should be added explaining so.

Therefore, please double-check everybody that contributed to the lines
you are sending (e.g. via `git-blame`) and add them as
`Co-developed-by`. Also, please add a note of what you changed/wrote
e.g. square brackets, and `Link` tags to the original PRs/discussions.

See, for instance, what Jamie did at [2] for arm64 or Lina at [3].

[1] https://github.com/Rust-for-Linux/linux/pull/225
[2] https://lore.kernel.org/rust-for-linux/20230125163739.3798252-2-Jamie.Cunliffe@xxxxxxx/
[3] https://lore.kernel.org/rust-for-linux/20230224-rust-vec-v1-4-733b5b5a57c5@xxxxxxxxxxxxx/

Cheers,
Miguel



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux