[PATCH v6 31/41] x86/shstk: Introduce routines modifying shstk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>

Shadow stacks are normally written to via CALL/RET or specific CET
instructions like RSTORSSP/SAVEPREVSSP. However during some Linux
operations the kernel will need to write to directly using the ring-0 only
WRUSS instruction.

A shadow stack restore token marks a restore point of the shadow stack, and
the address in a token must point directly above the token, which is within
the same shadow stack. This is distinctively different from other pointers
on the shadow stack, since those pointers point to executable code area.

Introduce token setup and verify routines. Also introduce WRUSS, which is
a kernel-mode instruction but writes directly to user shadow stack.

In future patches that enable shadow stack to work with signals, the kernel
will need something to denote the point in the stack where sigreturn may be
called. This will prevent attackers calling sigreturn at arbitrary places
in the stack, in order to help prevent SROP attacks.

To do this, something that can only be written by the kernel needs to be
placed on the shadow stack. This can be accomplished by setting bit 63 in
the frame written to the shadow stack. Userspace return addresses can't
have this bit set as it is in the kernel range. It is also can't be a
valid restore token.

Tested-by: Pengfei Xu <pengfei.xu@xxxxxxxxx>
Tested-by: John Allen <john.allen@xxxxxxx>
Reviewed-by: Kees Cook <keescook@xxxxxxxxxxxx>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@xxxxxxxxx>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@xxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxxxx>

---
v5:
 - Fix typo in commit log

v3:
 - Drop shstk_check_rstor_token()
 - Fail put_shstk_data() if bit 63 is set in the data (Kees)
 - Add comment in create_rstor_token() (Kees)
 - Pull in create_rstor_token() changes from future patch (Kees)

v2:
 - Add data helpers for writing to shadow stack.

v1:
 - Use xsave helpers.
---
 arch/x86/include/asm/special_insns.h | 13 +++++
 arch/x86/kernel/shstk.c              | 73 ++++++++++++++++++++++++++++
 2 files changed, 86 insertions(+)

diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index de48d1389936..d6cd9344f6c7 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -202,6 +202,19 @@ static inline void clwb(volatile void *__p)
 		: [pax] "a" (p));
 }
 
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+static inline int write_user_shstk_64(u64 __user *addr, u64 val)
+{
+	asm_volatile_goto("1: wrussq %[val], (%[addr])\n"
+			  _ASM_EXTABLE(1b, %l[fail])
+			  :: [addr] "r" (addr), [val] "r" (val)
+			  :: fail);
+	return 0;
+fail:
+	return -EFAULT;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */
+
 #define nop() asm volatile ("nop")
 
 static inline void serialize(void)
diff --git a/arch/x86/kernel/shstk.c b/arch/x86/kernel/shstk.c
index 1d30295e0066..13c02747386f 100644
--- a/arch/x86/kernel/shstk.c
+++ b/arch/x86/kernel/shstk.c
@@ -25,6 +25,8 @@
 #include <asm/fpu/api.h>
 #include <asm/prctl.h>
 
+#define SS_FRAME_SIZE 8
+
 static bool features_enabled(unsigned long features)
 {
 	return current->thread.features & features;
@@ -40,6 +42,35 @@ static void features_clr(unsigned long features)
 	current->thread.features &= ~features;
 }
 
+/*
+ * Create a restore token on the shadow stack.  A token is always 8-byte
+ * and aligned to 8.
+ */
+static int create_rstor_token(unsigned long ssp, unsigned long *token_addr)
+{
+	unsigned long addr;
+
+	/* Token must be aligned */
+	if (!IS_ALIGNED(ssp, 8))
+		return -EINVAL;
+
+	addr = ssp - SS_FRAME_SIZE;
+
+	/*
+	 * SSP is aligned, so reserved bits and mode bit are a zero, just mark
+	 * the token 64-bit.
+	 */
+	ssp |= BIT(0);
+
+	if (write_user_shstk_64((u64 __user *)addr, (u64)ssp))
+		return -EFAULT;
+
+	if (token_addr)
+		*token_addr = addr;
+
+	return 0;
+}
+
 static unsigned long alloc_shstk(unsigned long size)
 {
 	int flags = MAP_ANONYMOUS | MAP_PRIVATE | MAP_ABOVE4G;
@@ -159,6 +190,48 @@ int shstk_alloc_thread_stack(struct task_struct *tsk, unsigned long clone_flags,
 	return 0;
 }
 
+static unsigned long get_user_shstk_addr(void)
+{
+	unsigned long long ssp;
+
+	fpregs_lock_and_load();
+
+	rdmsrl(MSR_IA32_PL3_SSP, ssp);
+
+	fpregs_unlock();
+
+	return ssp;
+}
+
+static int put_shstk_data(u64 __user *addr, u64 data)
+{
+	if (WARN_ON_ONCE(data & BIT(63)))
+		return -EINVAL;
+
+	/*
+	 * Mark the high bit so that the sigframe can't be processed as a
+	 * return address.
+	 */
+	if (write_user_shstk_64(addr, data | BIT(63)))
+		return -EFAULT;
+	return 0;
+}
+
+static int get_shstk_data(unsigned long *data, unsigned long __user *addr)
+{
+	unsigned long ldata;
+
+	if (unlikely(get_user(ldata, addr)))
+		return -EFAULT;
+
+	if (!(ldata & BIT(63)))
+		return -EINVAL;
+
+	*data = ldata & ~BIT(63);
+
+	return 0;
+}
+
 void shstk_free(struct task_struct *tsk)
 {
 	struct thread_shstk *shstk = &tsk->thread.shstk;
-- 
2.17.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux