Re: [PATCH 15/24] clocksource/timer-riscv: Refactor riscv_timer_init_dt()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Sunil,

On Mon, Jan 30, 2023 at 11:52:16PM +0530, Sunil V L wrote:
> Refactor the timer init function such that few things can be shared by
> both DT and ACPI based platforms.
> 
> Signed-off-by: Anup Patel <apatel@xxxxxxxxxxxxxxxx>

What did Anup do here? He's not author or co-author, so the SoB chain
looks incorrect.

> Signed-off-by: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
> ---
>  drivers/clocksource/timer-riscv.c | 79 +++++++++++++++----------------
>  1 file changed, 37 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> index 1b4b36df5484..4016c065a01c 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -119,61 +119,28 @@ static irqreturn_t riscv_timer_interrupt(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
>  
> -static int __init riscv_timer_init_dt(struct device_node *n)
> +static int __init riscv_timer_init_common(void)
>  {
> -	int cpuid, error;
> -	unsigned long hartid;
> -	struct device_node *child;
> -	struct irq_domain *domain;
> -
> -	error = riscv_of_processor_hartid(n, &hartid);
> -	if (error < 0) {
> -		pr_warn("Not valid hartid for node [%pOF] error = [%lu]\n",
> -			n, hartid);
> -		return error;
> -	}
> -
> -	cpuid = riscv_hartid_to_cpuid(hartid);
> -	if (cpuid < 0) {
> -		pr_warn("Invalid cpuid for hartid [%lu]\n", hartid);
> -		return cpuid;
> -	}
> -
> -	if (cpuid != smp_processor_id())
> -		return 0;
> +	int error;
> +	struct fwnode_handle *intc_fwnode = riscv_get_intc_hwnode();
> +	struct irq_domain *domain = NULL;
>  
> -	child = of_find_compatible_node(NULL, NULL, "riscv,timer");
> -	if (child) {
> -		riscv_timer_cannot_wake_cpu = of_property_read_bool(child,
> -					"riscv,timer-cannot-wake-cpu");
> -		of_node_put(child);
> -	}

Uhh, where did this code go?
Unless I've badly missed something, this has vanished in the patch.

>  
> -	domain = NULL;
> -	child = of_get_compatible_child(n, "riscv,cpu-intc");
> -	if (!child) {
> -		pr_err("Failed to find INTC node [%pOF]\n", n);
> -		return -ENODEV;
> -	}
> -	domain = irq_find_host(child);
> -	of_node_put(child);
> +	domain = irq_find_matching_fwnode(intc_fwnode, DOMAIN_BUS_ANY);
>  	if (!domain) {
> -		pr_err("Failed to find IRQ domain for node [%pOF]\n", n);
> +		pr_err("Failed to find INTC node [%pfwP]\n", intc_fwnode);
>  		return -ENODEV;
>  	}
>  
>  	riscv_clock_event_irq = irq_create_mapping(domain, RV_IRQ_TIMER);
>  	if (!riscv_clock_event_irq) {
> -		pr_err("Failed to map timer interrupt for node [%pOF]\n", n);
> -		return -ENODEV;
> +		pr_err("Failed to map timer interrupt for node [%pfwP]\n",
> +			intc_fwnode);
>  	}
>  
> -	pr_info("%s: Registering clocksource cpuid [%d] hartid [%lu]\n",
> -	       __func__, cpuid, hartid);
>  	error = clocksource_register_hz(&riscv_clocksource, riscv_timebase);
>  	if (error) {
> -		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
> -		       error, cpuid);
> +		pr_err("clocksource register failed [%d]\n", error);

If you're changing this, s/register/registration/ to be grammatically
correct I suppose.

>  		return error;
>  	}
>  
> @@ -199,7 +166,35 @@ static int __init riscv_timer_init_dt(struct device_node *n)
>  		static_branch_enable(&riscv_sstc_available);
>  	}
>  
> +	pr_info("timer registered using %s\n",
> +		(static_branch_likely(&riscv_sstc_available)) ?
> +		"RISC-V Sstc" : "RISC-V SBI");

Why is this needed? Isn't there a print like 3 lines above here that
says "Timer interrupt in S-mode is available via sstc extension"?

> +
>  	return error;
>  }
>  
> +static int __init riscv_timer_init_dt(struct device_node *n)
> +{
> +	int cpuid, error;
> +	unsigned long hartid;
> +
> +	error = riscv_of_processor_hartid(n, &hartid);
> +	if (error < 0) {
> +		pr_warn("Not valid hartid for node [%pOF] error = [%lu]\n",

While you're already moving this, may as well fix the grammar IMO.
s/Not valid/Invalid/

Cheers,
Conor.

> +			n, hartid);
> +		return error;
> +	}
> +
> +	cpuid = riscv_hartid_to_cpuid(hartid);
> +	if (cpuid < 0) {
> +		pr_warn("Invalid cpuid for hartid [%lu]\n", hartid);
> +		return cpuid;
> +	}
> +
> +	if (cpuid != smp_processor_id())
> +		return 0;
> +
> +	return riscv_timer_init_common();
> +}
> +
>  TIMER_OF_DECLARE(riscv_timer, "riscv", riscv_timer_init_dt);
> -- 
> 2.38.0
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux