Remove bindings for the stih415/stih416/stid127 since they are
not supported within the kernel anymore.
Signed-off-by: Alain Volmat <avolmat@xxxxxx>
---
.../bindings/interrupt-controller/st,sti-irq-syscfg.txt | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
index ced6014061a3..977d7ed3670e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
@@ -6,11 +6,7 @@ and PL310 L2 Cache IRQs are controlled using System Configuration registers.
This driver is used to unmask them prior to use.
Required properties:
-- compatible : Should be set to one of:
- "st,stih415-irq-syscfg"
- "st,stih416-irq-syscfg"
- "st,stih407-irq-syscfg"
- "st,stid127-irq-syscfg"
+- compatible : Should be "st,stih407-irq-syscfg"
- st,syscfg : Phandle to Cortex-A9 IRQ system config registers
- st,irq-device : Array of IRQs to enable - should be 2 in length
- st,fiq-device : Array of FIQs to enable - should be 2 in length
@@ -25,11 +21,10 @@ Optional properties:
Example:
irq-syscfg {
- compatible = "st,stih416-irq-syscfg";
+ compatible = "st,stih407-irq-syscfg";
st,syscfg = <&syscfg_cpu>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
<ST_IRQ_SYSCFG_DISABLED>;
- st,invert-ext = <(ST_IRQ_SYSCFG_EXT_1_INV | ST_IRQ_SYSCFG_EXT_3_INV)>;
};
--
2.34.1
