This patch-set aims to solve some problems at system boot time
to enhance memory hotplug functionality.
[Background]
The Linux kernel cannot migrate pages used by the kernel because
of the kernel direct mapping. Since va = pa + PAGE_OFFSET, if the
physical address is changed, we cannot simply update the kernel
pagetable. On the contrary, we have to update all the pointers
pointing to the virtual address, which is very difficult to do.
In order to do memory hotplug, we should prevent the kernel to use
hotpluggable memory.
In ACPI, there is a table named SRAT(System Resource Affinity Table).
It contains system NUMA info (CPUs, memory ranges, PXM), and also a
flag field indicating which memory ranges are hotpluggable.
[Problem to be solved]
At the very early time when the system is booting, we use a bootmem
allocator, named memblock, to allocate memory for the kernel.
memblock will start to work before the kernel parse SRAT, which
means memblock won't know which memory is hotpluggable before SRAT
is parsed.
So at this time, memblock could allocate hotpluggable memory for
the kernel to use permanently. For example, the kernel may allocate
pagetables in hotpluggable memory, which cannot be freed when the
system is up.
So we have to prevent memblock allocating hotpluggable memory for
the kernel at the early boot time.
[Earlier solutions]>
We have tried to parse SRAT earlier, before memblock is ready. To
do this, we also have to do ACPI_INITRD_TABLE_OVERRIDE earlier.
Otherwise the override tables won't be able to effect.
This is not that easy to do because memblock is ready before direct
mapping is setup. So Yinghai split the ACPI_INITRD_TABLE_OVERRIDE
procedure into two steps: find and copy. Please refer to the
following patch-set:
https://lkml.org/lkml/2013/6/13/587
To this solution, tj gave a lot of comments and the following
suggestions.
[Suggestion from tj]
tj mainly gave the following suggestions:
1. Necessary reordering is OK, but we should not rely on
reordering to achieve the goal because it makes the kernel
too fragile.
2. Memory allocated to kernel for temporary usage is OK because
it will be freed when the system is up. Doing relocation
for permanent allocated hotpluggable memory will make the
the kernel more robust.
3. Need to enhance memblock to discover and complain if any
hotpluggable memory is allocated to kernel.
After a long thinking, we choose not to do the relocation for
the following reasons:
1. It's easy to find out the allocated hotpluggable memory. But
memblock will merge the adjoined ranges owned by different users
and used for different purposes. It's hard to find the owners.
2. Different memory has different way to be relocated. I think one
function for each kind of memory will make the code too messy.
3. Pagetable could be in hotpluggable memory. Relocating pagetable
is too difficult and risky. We have to update all PUD, PMD pages.
And also, ACPI_INITRD_TABLE_OVERRIDE and parsing SRAT procedures
are not long after pagetable is initialized. If we relocate the
pagetable not long after it was initialized, the code will be
very ugly.
[Solution in this patch-set]
In this patch-set, we still do the reordering, but in a new way.
1. Improve memblock with flags, so that it is able to differentiate
memory regions for different usage. And also a MEMBLOCK_HOTPLUGGABLE
flag to mark hotpluggable memory.
(patch 1 ~ 3)
2. When memblock is ready (memblock_x86_fill() is called), initialize
acpi_gbl_root_table_list, fulfill all the ACPI tables' phys addrs.
Now, we have all the ACPI tables' phys addrs provided by firmware.
(patch 4 ~ 8)
3. Check if there is a SRAT in initrd file used to override the one
provided by firmware. If so, get its phys addr.
(patch 12)
4. If no override SRAT in initrd, get the phys addr of the SRAT
provided by firmware.
(patch 13)
Now, we have the phys addr of the to be used SRAT, the one in
initrd or the one in firmware.
5. Parse only the memory affinities in SRAT, find out all the
hotpluggable memory regions and reserve them in memblock with
MEMBLK_HOTPLUGGABLE flag.
(patch 14 ~ 15)
6. The kernel goes through the current path. Any other related parts,
such as ACPI_INITRD_TABLE_OVERRIDE path, the current parsing ACPI
tables pathes, global variable numa_meminfo, and so on, are not
modified. They work as before.
7. Free memory with MEMBLK_HOTPLUGGABLE flag when memory initialization
is finished.
(patch 16)
8. Introduce movablecore=acpi boot option to allow users to enable
and disable this functionality.
(patch 17 ~ 21)
And patch 9 ~ 11 fix some small problems.
In summary, in order to get hotpluggable memory info as early as possible,
this patch-set only parse memory affinities in SRAT one more time right
after memblock is ready, and leave all the other pathes untouched. With
the hotpluggable memory info, we can arrange hotpluggable memory in
ZONE_MOVABLE to prevent the kernel to use it.
Thanks. :)
Tang Chen (20):
acpi: Print Hot-Pluggable Field in SRAT.
memblock, numa: Introduce flag into memblock.
x86, acpi, numa, mem-hotplug: Introduce MEMBLK_HOTPLUGGABLE to
reserve hotpluggable memory.
acpi: Remove "continue" in macro INVALID_TABLE().
acpi: Introduce acpi_invalid_table() to check if a table is invalid.
x86, acpi: Split acpi_boot_table_init() into two parts.
x86, acpi: Initialize ACPI root table list earlier.
x86, acpi: Also initialize signature and length when parsing root
table.
x86: Make get_ramdisk_{image|size}() global.
earlycpio.c: Fix the confusing comment of find_cpio_data().
x86, acpi: Try to find if SRAT is overrided earlier.
x86, acpi: Try to find SRAT in firmware earlier.
x86, acpi, numa: Reserve hotpluggable memory at early time.
x86, acpi, numa: Don't reserve memory on nodes the kernel resides in.
x86, memblock, mem-hotplug: Free hotpluggable memory reserved by
memblock.
page_alloc, mem-hotplug: Improve movablecore to {en|dis}able using
SRAT.
x86, numa: Synchronize nid info in memblock.reserve with
numa_meminfo.
x86, numa: Save nid when reserve memory into memblock.reserved[].
x86, numa, acpi, memory-hotplug: Make movablecore=acpi have higher
priority.
doc, page_alloc, acpi, mem-hotplug: Add doc for movablecore=acpi boot
option.
Yasuaki Ishimatsu (1):
x86: get pg_data_t's memory from other node
Documentation/kernel-parameters.txt | 10 ++
arch/x86/include/asm/setup.h | 3 +
arch/x86/kernel/acpi/boot.c | 38 +++--
arch/x86/kernel/setup.c | 22 +++-
arch/x86/mm/numa.c | 55 +++++++-
arch/x86/mm/srat.c | 11 +-
drivers/acpi/acpica/tbutils.c | 48 ++++++-
drivers/acpi/acpica/tbxface.c | 34 +++++
drivers/acpi/osl.c | 262 ++++++++++++++++++++++++++++++++---
drivers/acpi/tables.c | 7 +-
include/acpi/acpixf.h | 6 +
include/linux/acpi.h | 21 +++-
include/linux/memblock.h | 9 ++
include/linux/memory_hotplug.h | 5 +
include/linux/mm.h | 9 ++
lib/earlycpio.c | 7 +-
mm/memblock.c | 90 ++++++++++--
mm/memory_hotplug.c | 42 ++++++-
mm/nobootmem.c | 3 +
mm/page_alloc.c | 44 ++++++-
20 files changed, 656 insertions(+), 70 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
