Re: [PATCH v4 6/6] Documentation: amd_pstate: Update amd_pstate status sysfs for guided

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/31/23 12:21, Wyes Karny wrote:
> diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
> index 5304adf2fc2f..56a3d11f51a5 100644
> --- a/Documentation/admin-guide/pm/amd-pstate.rst
> +++ b/Documentation/admin-guide/pm/amd-pstate.rst
> @@ -303,13 +303,18 @@ efficiency frequency management method on AMD processors.
>  AMD Pstate Driver Operation Modes
>  =================================
>  
> -``amd_pstate`` CPPC has two operation modes: CPPC Autonomous(active) mode and
> -CPPC non-autonomous(passive) mode.
> -active mode and passive mode can be chosen by different kernel parameters.
> -When in Autonomous mode, CPPC ignores requests done in the Desired Performance
> -Target register and takes into account only the values set to the Minimum requested
> -performance, Maximum requested performance, and Energy Performance Preference
> -registers. When Autonomous is disabled, it only considers the Desired Performance Target.
> +``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode,
> +non-autonomous (passive) mode and guided autonomous (guided) mode.
> +Active/passive/guided mode can be chosen by different kernel parameters.
> +
> +- In autonomous mode, platform ignores the desired performance level request
> +  and takes into account only the values set to the minimum, maximum and energy
> +  performance preference registers.
> +- In non-autonomous mode, platform gets desired performance level
> +  from OS directly through Desired Performance Register.
> +- In guided-autonomous mode, platform sets operating performance level
> +  autonomously according to the current workload and within the limits set by
> +  OS through min and max performance registers.
>  
>  Active Mode
>  ------------
> @@ -338,6 +343,15 @@ to the Performance Reduction Tolerance register. Above the nominal performance l
>  processor must provide at least nominal performance requested and go higher if current
>  operating conditions allow.
>  
> +Guided Mode
> +-----------
> +
> +``amd_pstate=guided``
> +
> +If ``amd_pstate=guided`` is passed to kernel command line option then this mode
> +is activated.  In this mode, driver requests minimum and maximum performance
> +level and the platform autonomously selects a performance level in this range
> +and appropriate to the current workload.
>  
>  User Space Interface in ``sysfs``
>  =================================
> @@ -358,6 +372,9 @@ control its functionality at the system level.  They are located in the
>  	"passive"
>  		The driver is functional and in the ``passive mode``
>  
> +        "guided"
> +                The driver is functional and in the ``guided mode``
> +
>  	"disable"
>  		The driver is unregistered and not functional now.
>  

LGTM, thanks!

Reviewed-by: Bagas Sanjaya <bagasdotme@xxxxxxxxx>

-- 
An old man doll... just what I always wanted! - Clara




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux