[PATCH] hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Extend aquacomputer_d5next driver to expose the temp sensor of the
Aquacomputer Poweradjust 3 fan controller, which communicates
through a proprietary USB HID protocol.

The Poweradjust 3 is not currently known to expose firmware version
and serial number, so don't create debugfs entries if their values
can't be retrieved.

Tested by a user on Github [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/57

Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>
---
 Documentation/hwmon/aquacomputer_d5next.rst |  3 +
 drivers/hwmon/aquacomputer_d5next.c         | 88 +++++++++++++++++++--
 2 files changed, 84 insertions(+), 7 deletions(-)

diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index 3f7880fb8116..527bcd3edda9 100644
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -12,6 +12,7 @@ Supported devices:
 * Aquacomputer Octo fan controller
 * Aquacomputer Quadro fan controller
 * Aquacomputer High Flow Next sensor
+* Aquacomputer Poweradjust 3 fan controller
 
 Author: Aleksa Savic
 
@@ -53,6 +54,8 @@ The High Flow Next exposes +5V voltages, water quality, conductivity and flow re
 A temperature sensor can be connected to it, in which case it provides its reading
 and an estimation of the dissipated/absorbed power in the liquid cooling loop.
 
+The Poweradjust 3 controller exposes a single external temperature sensor.
+
 Depending on the device, not all sysfs and debugfs entries will be available.
 Writing to virtual temperature sensors is not currently supported.
 
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index c1b885240ddf..2945b630b4a0 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -4,7 +4,8 @@
  * Quadro, High Flow Next, Aquaero)
  *
  * Aquacomputer devices send HID reports (with ID 0x01) every second to report
- * sensor values.
+ * sensor values, except for devices that communicate through the
+ * legacy way (currently, Poweradjust 3).
  *
  * Copyright 2021 Aleksa Savic <savicaleksa83@xxxxxxxxx>
  * Copyright 2022 Jack Doan <me@xxxxxxxxxxxx>
@@ -28,8 +29,9 @@
 #define USB_PRODUCT_ID_FARBWERK360	0xf010
 #define USB_PRODUCT_ID_OCTO		0xf011
 #define USB_PRODUCT_ID_HIGHFLOWNEXT	0xf012
+#define USB_PRODUCT_ID_POWERADJUST3	0xf0bd
 
-enum kinds { d5next, farbwerk, farbwerk360, octo, quadro, highflownext, aquaero };
+enum kinds { d5next, farbwerk, farbwerk360, octo, quadro, highflownext, aquaero, poweradjust3 };
 
 static const char *const aqc_device_names[] = {
 	[d5next] = "d5next",
@@ -38,7 +40,8 @@ static const char *const aqc_device_names[] = {
 	[octo] = "octo",
 	[quadro] = "quadro",
 	[highflownext] = "highflownext",
-	[aquaero] = "aquaero"
+	[aquaero] = "aquaero",
+	[poweradjust3] = "poweradjust3"
 };
 
 #define DRIVER_NAME			"aquacomputer_d5next"
@@ -59,6 +62,9 @@ static u8 secondary_ctrl_report[] = {
 	0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x34, 0xC6
 };
 
+/* Report IDs for legacy devices */
+#define POWERADJUST3_STATUS_REPORT_ID	0x03
+
 /* Info, sensor sizes and offsets for most Aquacomputer devices */
 #define AQC_SERIAL_START		0x3
 #define AQC_FIRMWARE_VERSION		0xD
@@ -176,6 +182,13 @@ static u16 quadro_ctrl_fan_offsets[] = { 0x37, 0x8c, 0xe1, 0x136 }; /* Fan speed
 #define HIGHFLOWNEXT_5V_VOLTAGE		97
 #define HIGHFLOWNEXT_5V_VOLTAGE_USB	99
 
+/* Specs of the Poweradjust 3 */
+#define POWERADJUST3_NUM_SENSORS	1
+#define POWERADJUST3_SENSOR_REPORT_SIZE	0x32
+
+/* Sensor report offsets for the Poweradjust 3 */
+#define POWERADJUST3_SENSOR_START	0x03
+
 /* Labels for D5 Next */
 static const char *const label_d5next_temp[] = {
 	"Coolant temp"
@@ -326,6 +339,11 @@ static const char *const label_highflownext_voltage[] = {
 	"+5V USB voltage"
 };
 
+/* Labels for Poweradjust 3 */
+static const char *const label_poweradjust3_temp_sensors[] = {
+	"External sensor"
+};
+
 struct aqc_fan_structure_offsets {
 	u8 voltage;
 	u8 curr;
@@ -357,6 +375,8 @@ struct aqc_data {
 	enum kinds kind;
 	const char *name;
 
+	int status_report_id;	/* Used for legacy devices, report is stored in buffer */
+
 	int buffer_size;
 	u8 *buffer;
 	int checksum_start;
@@ -615,14 +635,49 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
 	return 0;
 }
 
+/* Read device sensors by manually requesting the sensor report (legacy way) */
+static int aqc_legacy_read(struct aqc_data *priv)
+{
+	int ret, i, sensor_value;
+
+	mutex_lock(&priv->mutex);
+
+	memset(priv->buffer, 0x00, priv->buffer_size);
+	ret = hid_hw_raw_request(priv->hdev, priv->status_report_id, priv->buffer,
+				 priv->buffer_size, HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+	if (ret < 0)
+		goto unlock_and_return;
+
+	/* Temperature sensor readings */
+	for (i = 0; i < priv->num_temp_sensors; i++) {
+		sensor_value = get_unaligned_le16(priv->buffer + priv->temp_sensor_start_offset +
+						  i * AQC_SENSOR_SIZE);
+		priv->temp_input[i] = sensor_value * 10;
+	}
+
+	priv->updated = jiffies;
+
+unlock_and_return:
+	mutex_unlock(&priv->mutex);
+	return ret;
+}
+
 static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		    int channel, long *val)
 {
 	int ret;
 	struct aqc_data *priv = dev_get_drvdata(dev);
 
-	if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL))
-		return -ENODATA;
+	if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL)) {
+		if (priv->status_report_id != 0) {
+			/* Legacy devices require manual reads */
+			ret = aqc_legacy_read(priv);
+			if (ret < 0)
+				return -ENODATA;
+		} else {
+			return -ENODATA;
+		}
+	}
 
 	switch (type) {
 	case hwmon_temp:
@@ -1014,9 +1069,13 @@ static void aqc_debugfs_init(struct aqc_data *priv)
 		  dev_name(&priv->hdev->dev));
 
 	priv->debugfs = debugfs_create_dir(name, NULL);
-	debugfs_create_file("serial_number", 0444, priv->debugfs, priv, &serial_number_fops);
-	debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops);
 
+	if (priv->serial_number_start_offset != 0)
+		debugfs_create_file("serial_number", 0444, priv->debugfs, priv,
+				    &serial_number_fops);
+	if (priv->firmware_version_offset != 0)
+		debugfs_create_file("firmware_version", 0444, priv->debugfs, priv,
+				    &firmware_version_fops);
 	if (priv->power_cycle_count_offset != 0)
 		debugfs_create_file("power_cycles", 0444, priv->debugfs, priv, &power_cycles_fops);
 }
@@ -1214,6 +1273,17 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		priv->power_label = label_highflownext_power;
 		priv->voltage_label = label_highflownext_voltage;
 		break;
+	case USB_PRODUCT_ID_POWERADJUST3:
+		priv->kind = poweradjust3;
+
+		priv->num_fans = 0;
+
+		priv->num_temp_sensors = POWERADJUST3_NUM_SENSORS;
+		priv->temp_sensor_start_offset = POWERADJUST3_SENSOR_START;
+		priv->buffer_size = POWERADJUST3_SENSOR_REPORT_SIZE;
+
+		priv->temp_label = label_poweradjust3_temp_sensors;
+		break;
 	default:
 		break;
 	}
@@ -1225,6 +1295,9 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 		priv->fan_structure = &aqc_aquaero_fan_structure;
 		break;
+	case poweradjust3:
+		priv->status_report_id = POWERADJUST3_STATUS_REPORT_ID;
+		break;
 	default:
 		priv->serial_number_start_offset = AQC_SERIAL_START;
 		priv->firmware_version_offset = AQC_FIRMWARE_VERSION;
@@ -1287,6 +1360,7 @@ static const struct hid_device_id aqc_table[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_HIGHFLOWNEXT) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_POWERADJUST3) },
 	{ }
 };
 
-- 
2.39.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux