Correct spelling problems for Documentation/scsi/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: linux-doc@xxxxxxxxxxxxxxx
Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx>
Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Cc: linux-scsi@xxxxxxxxxxxxxxx
---
Documentation/scsi/ncr53c8xx.rst | 4 ++--
Documentation/scsi/sym53c8xx_2.rst | 2 +-
Documentation/scsi/tcm_qla2xxx.rst | 2 +-
Documentation/scsi/ufs.rst | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff -- a/Documentation/scsi/ncr53c8xx.rst b/Documentation/scsi/ncr53c8xx.rst
--- a/Documentation/scsi/ncr53c8xx.rst
+++ b/Documentation/scsi/ncr53c8xx.rst
@@ -906,7 +906,7 @@ burst:#x burst enabled (1<<#x burst tr
led:0 disable LED support
===== ===================
- Donnot enable LED support if your scsi board does not use SDMS BIOS.
+ Do not enable LED support if your scsi board does not use SDMS BIOS.
(See 'Configuration parameters')
10.2.13 Max wide
@@ -1222,7 +1222,7 @@ Unfortunately, the following common SCSI
- Bad quality terminators.
On the other hand, either bad cabling, broken devices, not conformant
-devices, ... may cause a SCSI signal to be wrong when te driver reads it.
+devices, ... may cause a SCSI signal to be wrong when the driver reads it.
10.7 IMMEDIATE ARBITRATION boot option
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff -- a/Documentation/scsi/sym53c8xx_2.rst b/Documentation/scsi/sym53c8xx_2.rst
--- a/Documentation/scsi/sym53c8xx_2.rst
+++ b/Documentation/scsi/sym53c8xx_2.rst
@@ -703,7 +703,7 @@ Unfortunately, the following common SCSI
- Bad quality terminators.
On the other hand, either bad cabling, broken devices, not conformant
-devices, ... may cause a SCSI signal to be wrong when te driver reads it.
+devices, ... may cause a SCSI signal to be wrong when the driver reads it.
15. SCSI problem troubleshooting
================================
diff -- a/Documentation/scsi/tcm_qla2xxx.rst b/Documentation/scsi/tcm_qla2xxx.rst
--- a/Documentation/scsi/tcm_qla2xxx.rst
+++ b/Documentation/scsi/tcm_qla2xxx.rst
@@ -6,7 +6,7 @@ tcm_qla2xxx Driver Notes
tcm_qla2xxx jam_host attribute
------------------------------
-There is now a new module endpoint atribute called jam_host
+There is now a new module endpoint attribute called jam_host
attribute::
jam_host: boolean=0/1
diff -- a/Documentation/scsi/ufs.rst b/Documentation/scsi/ufs.rst
--- a/Documentation/scsi/ufs.rst
+++ b/Documentation/scsi/ufs.rst
@@ -206,5 +206,5 @@ Device-Specific Data property named "ref
is interpreted as frequency in Hz and must match one of the values given in
the UFS specification. UFS subsystem will attempt to read the value when
executing common controller initialization. If the value is available, UFS
-subsytem will ensure the bRefClkFreq attribute of the UFS storage device is
+subsystem will ensure the bRefClkFreq attribute of the UFS storage device is
set accordingly and will modify it if there is a mismatch.
