From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx> add OF support for the tvp7002 driver. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> --- This patch depends on https://patchwork.kernel.org/patch/2828800/ Changes for v4: 1: Improved descrition of end point properties. Changes for v3: 1: Fixed review comments pointed by Sylwester. .../devicetree/bindings/media/i2c/tvp7002.txt | 53 ++++++++++++++++ drivers/media/i2c/tvp7002.c | 67 ++++++++++++++++++-- 2 files changed, 113 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp7002.txt diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt new file mode 100644 index 0000000..1d00935 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt @@ -0,0 +1,53 @@ +* Texas Instruments TV7002 video decoder + +The TVP7002 device supports digitizing of video and graphics signal in RGB and +YPbPr color space. + +Required Properties : +- compatible : Must be "ti,tvp7002" + +Optional Properties: +- hsync-active: HSYNC Polarity configuration for the bus. Default value when + this property is not specified is <0>. + +- vsync-active: VSYNC Polarity configuration for the bus. Default value when + this property is not specified is <0>. + +- pclk-sample: Clock polarity of the bus. Default value when this property is + not specified is <0>. + +- sync-on-green-active: Active state of Sync-on-green signal property of the + endpoint. + 0 = Normal Operation (Default) + 1 = Inverted operation + +- field-even-active: Active-high Field ID output polarity control of the bus. + Under normal operation, the field ID output is set to logic 1 for an odd field + (field 1)and set to logic 0 for an even field (field 0). + 0 = Normal operation (default) + 1 = FID output polarity inverted + +For further reading of port node refer Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + tvp7002@5c { + compatible = "ti,tvp7002"; + reg = <0x5c>; + + port { + tvp7002_1: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + sync-on-green-active = <1>; + field-even-active = <0>; + }; + }; + }; + ... + }; diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c index f6b1f3f..24a08fa 100644 --- a/drivers/media/i2c/tvp7002.c +++ b/drivers/media/i2c/tvp7002.c @@ -35,6 +35,8 @@ #include <media/v4l2-device.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> +#include <media/v4l2-of.h> + #include "tvp7002_reg.h" MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver"); @@ -943,6 +945,48 @@ static const struct v4l2_subdev_ops tvp7002_ops = { .pad = &tvp7002_pad_ops, }; +static struct tvp7002_config * +tvp7002_get_pdata(struct i2c_client *client) +{ + struct v4l2_of_endpoint bus_cfg; + struct tvp7002_config *pdata; + struct device_node *endpoint; + unsigned int flags; + + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) + return client->dev.platform_data; + + endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); + if (!endpoint) + return NULL; + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto done; + + v4l2_of_parse_endpoint(endpoint, &bus_cfg); + flags = bus_cfg.bus.parallel.flags; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) + pdata->hs_polarity = 1; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) + pdata->vs_polarity = 1; + + if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + pdata->clk_polarity = 1; + + if (flags & V4L2_MBUS_FIELD_EVEN_HIGH) + pdata->fid_polarity = 1; + + if (flags & V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH) + pdata->sog_polarity = 1; + +done: + of_node_put(endpoint); + return pdata; +} + /* * tvp7002_probe - Probe a TVP7002 device * @c: ptr to i2c_client struct @@ -954,32 +998,32 @@ static const struct v4l2_subdev_ops tvp7002_ops = { */ static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id) { + struct tvp7002_config *pdata = tvp7002_get_pdata(c); struct v4l2_subdev *sd; struct tvp7002 *device; struct v4l2_dv_timings timings; int polarity_a; int polarity_b; u8 revision; - int error; + if (pdata == NULL) { + dev_err(&c->dev, "No platform data\n"); + return -EINVAL; + } + /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(c->adapter, I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) return -EIO; - if (!c->dev.platform_data) { - v4l_err(c, "No platform data!!\n"); - return -ENODEV; - } - device = devm_kzalloc(&c->dev, sizeof(struct tvp7002), GFP_KERNEL); if (!device) return -ENOMEM; sd = &device->sd; - device->pdata = c->dev.platform_data; + device->pdata = pdata; device->current_timings = tvp7002_timings; /* Tell v4l2 the device is ready */ @@ -1084,9 +1128,18 @@ static const struct i2c_device_id tvp7002_id[] = { }; MODULE_DEVICE_TABLE(i2c, tvp7002_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tvp7002_of_match[] = { + { .compatible = "ti,tvp7002", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, tvp7002_of_match); +#endif + /* I2C driver data */ static struct i2c_driver tvp7002_driver = { .driver = { + .of_match_table = of_match_ptr(tvp7002_of_match), .owner = THIS_MODULE, .name = TVP7002_MODULE_NAME, }, -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
