Re: [RFC PATCH v2 03/31] Documentation: Add binding for kalray,kv3-1-apic-gic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20/01/2023 15:09, Yann Sionneau wrote:
> From: Jules Maselbas <jmaselbas@xxxxxxxxx>
> 
> Add documentation for `kalray,kv3-1-apic-gic` binding.
> 
> Co-developed-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
> Signed-off-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
> Signed-off-by: Yann Sionneau <ysionneau@xxxxxxxxx>
> ---

All the comments apply here and to all your other patches - wrong
subject, missing blank lines, missing additionalProperties, missing
tests (patches were for sure not tested as you can see from bot's
answers) etc. Really, please start from scratch on example-schema.

> 
> Notes:
>     V1 -> V2: new patch
> 
>  .../kalray,kv3-1-apic-gic.yaml                | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kalray,kv3-1-apic-gic.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/kalray,kv3-1-apic-gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/kalray,kv3-1-apic-gic.yaml
> new file mode 100644
> index 000000000000..7a37f19db2fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/kalray,kv3-1-apic-gic.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/kalray,kv3-1-apic-gic#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kalray kv3-1 APIC-GIC
> +
> +description: |
> +  Each cluster in the Coolidge SoC includes an Advanced Programmable Interrupt
> +  Controller (APIC) which is split in two part:
> +    - a Generic Interrupt Controller (referred as APIC-GIC)
> +    - a Mailbox Controller           (referred as APIC-Mailbox)
> +  The APIC-GIC acts as an intermediary interrupt controller, muxing/routing
> +  incoming interrupts to output interrupts connected to kvx cores interrupts lines.
> +  The 139 possible input interrupt lines are organized as follow:
> +     - 128 from the mailbox controller (one it per mailboxes)
> +     - 1   from the NoC router
> +     - 5   from IOMMUs
> +     - 1   from L2 cache DMA job FIFO
> +     - 1   from cluster watchdog
> +     - 2   for SECC, DECC
> +     - 1   from Data NoC
> +  The 72 possible output interrupt lines:
> +     -  68 : 4 interrupts per cores (17 cores)
> +     -  1 for L2 cache controller
> +     -  3 extra that are for padding
> +
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: kalray,kv3-1-apic-gic

Missing reg

> +  "#interrupt-cells":
> +    const: 1
> +    description:
> +      The IRQ number.
> +  interrupt-controller: true
> +  interrupt-parent: true

Drop, should not be needed.

> +  interrupts:
> +    maxItems: 4
> +    description: |
> +     Specifies the interrupt line(s) in the interrupt-parent controller node;
> +     valid values depend on the type of parent interrupt controller
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#interrupt-cells"
> +  - interrupt-controller
> +  - interrupt-parent
> +  - interrupts
> +
> +examples:
> +  - |
> +    apic_gic: interrupt-controller@a20000 {
> +        compatible = "kalray,kv3-1-apic-gic";
> +        reg = <0 0xa20000 0 0x12000>;
> +        #interrupt-cells = <1>;
> +        interrupt-controller;
> +        interrupt-parent = <&intc>;
> +        interrups = <4 5 6 7>;
> +    };
> +
> +...

Best regards,
Krzysztof




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux