Re: [PATCH v8 10/28] gunyah: rsc_mgr: Add resource manager RPC core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 1/17/2023 2:33 PM, Alex Elder wrote:
On 12/19/22 4:58 PM, Elliot Berman wrote:
The resource manager is a special virtual machine which is always
running on a Gunyah system. It provides APIs for creating and destroying
VMs, secure memory management, sharing/lending of memory between VMs,
and setup of inter-VM communication. Calls to the resource manager are
made via message queues.

I mentioned in an earlier message that I did a really thorough
review of this.  Actually I haven't reviewed the interrupt part
yet, but I'll get to that.  I want to get my comments out now.

I found one bug, but I'd guess it's not likely to occur (though
user space can trigger it so it's serious).  You'll see it below.

This patch implements the basic probing and RPC mechanism to make those
API calls. Request/response calls can be made with gh_rm_call.
Drivers can also register to notifications pushed by RM via
gh_rm_register_notifier

Is there a human-readable document that explains the RPC
protocol and formats?  (It would provide a way to compare
the implementation with the intended design.)

Here's what I see:

It appears that each sent message is delivered exactly once,
and messages arrive in order and are assumed to be intact.

A Gunyah message holds a 240 byte maximum payload, while a
resource manager RPC message (carried in a Gunyah message)
has a 232 byte maximum payload.

An RPC "connection" is either a notification message (only
*from* the resource manager) or a request/response message
pair sharing the same sequence ID (with the request only
going *to* the resource manager).  An RPC "connection"
consists of a single RPC message (of any of the three types)
followed by 0-62 "fragment" messages, where the payload for
each message is concatenated by the receiver into a single
buffer (up to 63 * 232 = 14616 bytes in size).

An RPC header contains a sequence ID that's unique for
each active "connection" to the resource manager (and
ignored for notifications).  It also contains a message
ID supplied by the user of the resource manager interface
(e.g., a VM); the message ID in a response must match the
message ID in its matching request.


This is the correct understanding. There is a document, I will work with the right folks to see how we make it available.

Specific API calls that resource manager supports will be implemented in
subsequent patches.

Signed-off-by: Elliot Berman <quic_eberman@xxxxxxxxxxx>
---
  MAINTAINERS                    |   2 +-
  drivers/virt/gunyah/Kconfig    |  14 +
  drivers/virt/gunyah/Makefile   |   3 +
  drivers/virt/gunyah/rsc_mgr.c  | 584 +++++++++++++++++++++++++++++++++
  drivers/virt/gunyah/rsc_mgr.h  |  36 ++
  include/linux/gunyah_rsc_mgr.h |  18 +
  6 files changed, 656 insertions(+), 1 deletion(-)
  create mode 100644 drivers/virt/gunyah/rsc_mgr.c
  create mode 100644 drivers/virt/gunyah/rsc_mgr.h
  create mode 100644 include/linux/gunyah_rsc_mgr.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 667480bfd387..bb315385e155 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8944,7 +8944,7 @@ F:    Documentation/virt/gunyah/
  F:    arch/arm64/gunyah/
  F:    drivers/mailbox/gunyah-msgq.c
  F:    drivers/virt/gunyah/
-F:    include/linux/gunyah.h
+F:    include/linux/gunyah*.h
  HABANALABS PCI DRIVER
  M:    Oded Gabbay <ogabbay@xxxxxxxxxx>
diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
index 127156a678a6..4a6189dedab2 100644
--- a/drivers/virt/gunyah/Kconfig
+++ b/drivers/virt/gunyah/Kconfig
@@ -10,3 +10,17 @@ config GUNYAH
        Say Y/M here to enable the drivers needed to interact in a Gunyah
        virtual environment.
+
+if GUNYAH
+config GUNYAH_RESOURCE_MANAGER

Is Gunyah useful without the resource manager?

There might be good reasons to have different kernel config
options for parts of Gunyah (like, perhaps you want to allow
a *different* resource manager to be used).  But if, overall,
a component is fundamentally required for Gunyah to operate,
I don't think it's helpful to configure it separately.

This comment applies to all your config options.  I won't
mention it again, but maybe you can consider it, and for
anything that's pretty fundamental, don't make it an option.


I've removed GUNYAH_MESSAGE_QUEUES, GUNYAH_RESOURCE_MANAGER, and GUNYAH_VM_MANAGER.

These config options remain:
- GUNYAH (Patch 5)
- GUNYAH_PLATFORM_HOOKS (Patch 17)
- SAMPLE_GUNYAH (Patch 16)

From the RFC patches, I'm planning on keeping all the options introduced there since they are not fundamental to launching a VM.
- GUNYAH_VCPU (Patch 25)
- GUNYAH_IRQFD (Patch 27)
- GUNYAH_IOEVENTFD (Patch 28)

+    tristate "Gunyah Resource Manager"
+    depends on MAILBOX
+    select GUNYAH_MESSAGE_QUEUES
+    help
+      The resource manager (RM) is a privileged application VM supporting
+      the Gunyah Hypervisor. Enable this driver to support communicating
+      with Gunyah RM. This is typically required for a VM running under
+      Gunyah wanting to have Gunyah-awareness.
+
+      Say Y/M here if unsure.
+endif
diff --git a/drivers/virt/gunyah/Makefile b/drivers/virt/gunyah/Makefile
index 2ac4ee64b89d..e7cf59b9e64e 100644
--- a/drivers/virt/gunyah/Makefile
+++ b/drivers/virt/gunyah/Makefile
@@ -1 +1,4 @@
  obj-$(CONFIG_GUNYAH) += gunyah.o
+
+gunyah_rsc_mgr-y += rsc_mgr.o
+obj-$(CONFIG_GUNYAH_RESOURCE_MANAGER) += gunyah_rsc_mgr.o
diff --git a/drivers/virt/gunyah/rsc_mgr.c b/drivers/virt/gunyah/rsc_mgr.c
new file mode 100644
index 000000000000..6b281576f5af
--- /dev/null
+++ b/drivers/virt/gunyah/rsc_mgr.c
@@ -0,0 +1,584 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/gunyah.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/kthread.h>
+#include <linux/notifier.h>
+#include <linux/workqueue.h>
+#include <linux/completion.h>
+#include <linux/gunyah_rsc_mgr.h>
+#include <linux/platform_device.h>
+
+#include "rsc_mgr.h"
+
+/* Resource Manager Header */
+struct gh_rm_rpc_hdr {

This is a style thing, but I prefer *not* having struct
definitions with related value definitions interleaved.
My preference would be to define the values above the
struct definitions.  A comment can indicate which field
a given group of definitions is associated with.  And
if it's ambiguous, the symbol names can further tie
them together.


Done.

+#define RM_RPC_HDR_VERSION_ONE        0x1

I don't think HEADER_VERSION_ONE is any more understandable
than just "1" if that's its value.  Unless you're envisioning
a more complex versioning scheme, using 1, 2, 3 (etc.) for
the versions is cleaner than VERSION_ONE, VERSION_TWO,
VERSION_THREE, etc.
 >> +#define RM_RPC_API_VERSION_MASK        GENMASK(3, 0)
+
+#define RM_RPC_HDR_WORDS        0x2

Here's another case where it might just be simpler to open-code
the numeric value in the code.  Even better, I believe this
represents the number of words in an RPC header.  That is better
expressed as:
     (sizeof(struct gh_rm_rpc_hdr) / sizeof(u32))

At this point it seems there *is* only one version.  Even so,
the point of this (currently anyway) is to define the Gunyah
RPC API that *this driver* supports.  That doesn't change for
any message header, so maybe you could just define something
like this:

#define RM_RPC_API_VERSION  FIELD_PREP(RM_RPC_API_VERSION_MASK, 1)
#define RM_RPC_HDR_WORDS    FIELD_PREP(RM_RPC_HEADER_WORDS_MASK,
                        (sizeof(structgh_rm_rpc_hdr) /
                         sizeof(u32))
#define RM_RPC_API        (RM_RPC_API_VERSION | RM_RPC_HDR_WORDS)

Then you can use RM_RPC_API in gh_rm_send_request() to fill in
the api field of the RPC message header.  You could also check
it in gh_rm_msgq_rx_data() (something you don't currently do).
This might look a little ugly, but it simplifies the code where
it's used.


I like this approach, it doesn't seem uglier to me.

+#define RM_RPC_HEADER_WORDS_MASK    GENMASK(7, 4)
+    u8 api;
+
+#define RM_RPC_TYPE_CONT        0x0
+#define RM_RPC_TYPE_REQ        0x1

s/REQ/REQUEST/    (maybe)

Also there is a missing tab between the name and its value.

+#define RM_RPC_TYPE_RPLY        0x2

s/RPLY/REPLY/

+#define RM_RPC_TYPE_NOTIF        0x3
+#define RM_RPC_TYPE_MASK        GENMASK(1, 0)
+
+#define GH_RM_MAX_NUM_FRAGMENTS        62
+#define RM_RPC_FRAGMENTS_MASK       GENMASK(7, 2)
+    u8 type;
+    __le16 seq;
+    __le32 msg_id;
+} __packed;
+
+/* Standard reply header */
+struct gh_rm_rpc_reply_hdr {
+    struct gh_rm_rpc_hdr rpc_hdr;
+    u32 err_code;

Why is endianness represented in the sequence numbe r and
message id in the header, but not in the error code here?
Is the error code set by local software or something?


I had missed adding this in the explicit le32_to_cpu conversions, it's added now.

The values that can land in err_code are defined in
"rsc_mgr.h" defined at the end of this patch.  Some
examples are GH_RM_ERROR_OK and GH_RM_ERROR_NOMEM.
Please indicate that somehow, for example:

     u32 err_code;    /* GH_RM_ERROR_**/


Done.

These values are (almost) always positive.  But I see
two problems:
- If non-zero, this value is returned by gh_rm_call(), and
   that function is expected to return a *negative* value
   on error.
- RM_ERROR_UNIMPLEMENTED is defined as 0xffffffff; that
   value, when interpreted as a signed int, is -1, which
   if interpreted as an errno is EPERM.  That is at best
   a misleading result if returned by gh_rm_call().


Done. I've added retry logic for GH_ERROR_RETRY (so far never returned by resource manager, but it's in the spec).

+} __packed;
+
+#define GH_RM_MAX_MSG_SIZE    (GH_MSGQ_MAX_MSG_SIZE - sizeof(struct gh_rm_rpc_hdr))
+
+/**
+ * struct gh_rm_connection - Represents a complete message from resource manager + * @payload: Combined payload of all the fragments (msg headers stripped off).
+ * @size: Size of the payload.

The size is the number of bytes of payload received *so far* (in
case there are fragments).  It is not the size of the payload
until it has been completely received.


I've updated the comment to mention this.

+ * @ret: Linux return code, set in case there was an error processing connection
+ * @msg_id: Message ID from the header.
+ * @type: RM_RPC_TYPE_RPLY or RM_RPC_TYPE_NOTIF.
+ * @num_fragments: total number of fragments expected to be received.
+ * @fragments_received: fragments received so far.
+ * @rm_error: For request/reply sequences with standard replies.
+ * @seq: Sequence ID for the main message.
+ * @seq_done: Signals caller that the RM reply has been received
+ */
+struct gh_rm_connection {
+    void *payload;
+    size_t size;
+    int ret;
+    u32 msg_id;

The msg_id field is actually opaque from this driver's perspective.
The only thing that matters is if a response message ID *matches*
a request message ID.  It could be maintained in __le32 byte order
(as received).


Done.

+    u8 type;
+
+    u8 num_fragments;
+    u8 fragments_received;
+

The next three fields are (as the comment says) only used for
request/reply sequences.  You could put them in a structure,
then have that structure share space in a union with a work
structure used for notification messages.  That could replace
struct gh_rm_notif_complete (which would become unnecessary).


Done.

+    /* only for req/reply sequence */
+    u32 rm_error;
+    u16 seq;
+    struct completion seq_done;
+};
+
+struct gh_rm_notif_complete {
+    struct gh_rm_connection *conn;
+    struct work_struct work;
+};
+
+struct gh_rm_rpc {

I actually think this structure should just be called "gh_rm".
Yes, it's the RPC interface for the resource manager, but this
interface (which happens to use RPC) abstractly represents the
resource manager *itself*.


Done.

+    struct device *dev;
+    struct gunyah_resource tx_ghrsc, rx_ghrsc;
+    struct gh_msgq msgq;
+    struct mbox_client msgq_client;
+    struct gh_rm_connection *active_rx_connection;
+    int last_tx_ret;
+
+    struct idr call_idr;
+    struct mutex call_idr_lock;
+
+    struct mutex send_lock;
+
+    struct work_struct recv_work;
+};
+
+static struct gh_rm_connection *gh_rm_alloc_connection(u32 msg_id, u8 type)
+{
+    struct gh_rm_connection *connection;
+
+    connection = kzalloc(sizeof(*connection), GFP_KERNEL);
+    if (!connection)
+        return NULL;
+
+    connection->type = type;
+    connection->msg_id = msg_id;
+
+    return connection;
+}
+
+static int gh_rm_init_connection_payload(struct gh_rm_connection *connection, void *msg,
+                    size_t hdr_size, size_t msg_size)
+{
+    struct gh_rm_rpc_hdr *hdr = msg;
+    size_t max_buf_size, payload_size;
+
+    if (hdr_size > msg_size)
+        return -EINVAL;
+
+    payload_size = msg_size - hdr_size;

The maximum payload size is 14616 bytes.  The msg_size comes
from the resource manager--which I guess is trustworthy.  But
you're already checking for a short message above, so you
might as well check for a message that's too big as well.
(Or just decide not to check either...)


Done.

+    connection->num_fragments = FIELD_GET(RM_RPC_FRAGMENTS_MASK, hdr->type);

Here too, num_fragments had better not be more than
GH_RM_MAX_NUM_FRAGMENTS (= 62).

+    connection->fragments_received = 0;
+
+    /* There's not going to be any payload, no need to allocate buffer. */
+    if (!payload_size && !connection->num_fragments)
+        return 0;
+
+    /*
+     * maximum payload size is GH_MSGQ_MAX_MSG_SIZE- hdr_size
+     * and can received (hdr->fragments + 1) of those
+     */
+    max_buf_size = (GH_MSGQ_MAX_MSG_SIZE - hdr_size) * (connection->num_fragments + 1);
+
+    connection->payload = kzalloc(max_buf_size, GFP_KERNEL);
+    if (!connection->payload)
+        return -ENOMEM;
+
+    memcpy(connection->payload, msg + hdr_size, payload_size);
+    connection->size = payload_size;
+    return 0;
+}
+
+static void gh_rm_notif_work(struct work_struct *work)
+{
+    struct gh_rm_notif_complete *notif = container_of(work, struct gh_rm_notif_complete, work);
+    struct gh_rm_connection *connection = notif->conn;
+
+    /* No users of notifications, yet. */
+
+    kfree(connection->payload);
+    kfree(connection);
+    kfree(notif);
+}
+
+static struct gh_rm_connection *gh_rm_process_notif(struct gh_rm_rpc *rsc_mgr,

Here you use "rsc_mgr" as the symbol having this type, while
elsewhere you use "rm".  Pick one, and use it consistenly (I
suggest using "rm" to represent a "struct gh_rm").


Done

+                            void *msg, size_t msg_size)
+{
+    struct gh_rm_rpc_hdr *hdr = msg;
+    struct gh_rm_connection *connection;
+
+    connection = gh_rm_alloc_connection(le32_to_cpu(hdr->msg_id),

We already know the header type is RM_RPC_TYPE_NOTIF.  Better
to state that explicitly here rather than decoding what's in
the header (again).


Done.

+                        FIELD_GET(RM_RPC_TYPE_MASK, hdr->type));
+    if (!connection) {
+        dev_err(rsc_mgr->dev, "Failed to alloc connection for notification, dropping.\n");
+        return NULL;
+    }
+
+    if (gh_rm_init_connection_payload(connection, msg, sizeof(*hdr), msg_size)) {

This could conceivably return -EINVAL as well (which is not an
allocation failure, despite what the message says).  The same
thing is done in gh_rm_process_rply().  (If the resource manager
is as trusted as it should be, and the hardware is not broken,
-EINVAL should never get returned...)


Updated the message to allow for -EINVAL.

+        dev_err(rsc_mgr->dev, "Failed to alloc connection buffer for notification, dropping.\n");
+        kfree(connection);
+        return NULL;
+    }
+
+    return connection;
+}
+
+static struct gh_rm_connection *gh_rm_process_rply(struct gh_rm_rpc *rsc_mgr,
+                           void *msg, size_t msg_size)
+{
+    struct gh_rm_rpc_reply_hdr *reply_hdr = msg;
+    struct gh_rm_rpc_hdr *hdr = msg;

Please use:

     struct gh_rm_rpc_hdr *hdr = &msg->rpc_hdr;


Done.

+    struct gh_rm_connection *connection;
+    u16 seq_id = le16_to_cpu(hdr->seq);
+
+    if (mutex_lock_interruptible(&rsc_mgr->call_idr_lock))
+        return ERR_PTR(-ERESTARTSYS);

THIS IS A BUG.

If this call gets interrupted, we'll return the ERESTARTSYS pointer.
That's non-null.

But the return value from gh_rm_process_rply() is blindly assigned
to the rsc_mgr->active_rx_connection pointer in gh_rm_msgq_rx_data()
if the RPC message type is RM_RPC_TYPE_RPLY.

Thereafter, if that pointer is non-null, it's assumed to refer
to a valid memory location.

I'm not sure what the right handling is.  You could save the
return value and check it with IS_ERR_OR_NULL().  Perhaps you
could return NULL here too, but it's actually not clear to me
you can simply ignore this situation and have the result be
correct.


I don't need interruptible lock here anyway as this function is now only called from threaded irq context.

+
+    connection = idr_find(&rsc_mgr->call_idr, seq_id);
+    mutex_unlock(&rsc_mgr->call_idr_lock);
+
+    if (!connection) {
+        dev_err(rsc_mgr->dev, "Failed to find connection for sequence %u\n", seq_id);
+        return NULL;
+    }
+    if (connection->msg_id != le32_to_cpu(hdr->msg_id)) {
+        dev_err(rsc_mgr->dev, "Replyfor sequence %u expected msg_id: %x but got %x\n",
+            seq_id, connection->msg_id, le32_to_cpu(hdr->msg_id));
+        /*
+         * Don't complete connection and error the client, maybe
+         * resource manager will send us the expected reply sequence soon.
+         */
+        return NULL;
+    }
+
+    if (gh_rm_init_connection_payload(connection, msg, sizeof(*reply_hdr), msg_size)) { +        dev_err(rsc_mgr->dev, "Failed to alloc connection buffer for sequence %d\n",
+            seq_id);
+        /* Send connection complete and error the client. */
+        connection->ret = -ENOMEM;
+        complete(&connection->seq_done);
+        return NULL;
+    }
+
+    connection->rm_error = reply_hdr->err_code;
+    return connection;

Since you're already passing in the resource manager as an argument,
you could take care of assigning its ->connection pointer here as well.
Doing it this way *might* clean up the caller a bit (but sometimes
you have to try it to see).


In the current implementation, all of the handling "active_rx_connection" is done just in gh_rm_msgq_rx_data, which I think makes it easier to track how it's being used. If it's spread it out to gh_rm_process_*, I think it gets harder to follow if someone is new to the code.

+}
+
+static void gh_rm_process_cont(struct gh_rm_rpc *rsc_mgr, struct gh_rm_connection *connection,
+                void *msg, size_t msg_size)
+{
+    struct gh_rm_rpc_hdr *hdr = msg;
+    size_t payload_size = msg_size - sizeof(*hdr);

Maybe:
     void *payload = hdr + 1;

Here too, the message size is coming from the resource manager.
But it seems prudent to ensure msg_size is >= sizeof(*hdr)
and <= GH_MSGQ_MAXMSG_SIZE.


The max msg_size comes from hypervisor, but I will add a check that all the messages we receive are <= GH_MSGQ_MAX_MSG_SIZE.

+
+    /*
+     * hdr->fragments and hdr->msg_id preserves thevalue from first reply
+     * or notif message. To detect mishandling, check it's still intact.
+     */
+    if (connection->msg_id != le32_to_cpu(hdr->msg_id))
+        dev_err(rsc_mgr->dev, "Appending mismatched continuation with id %d to connection with id %d\n",
+            le32_to_cpu(hdr->msg_id), connection->msg_id);
+    if (connection->num_fragments != FIELD_GET(RM_RPC_FRAGMENTS_MASK, hdr->type)) +        dev_err(rsc_mgr->dev, "Number of fragments mismatch for seq: %d\n",
+            le16_to_cpu(hdr->seq));

The sequencer ID is irrelevant on a notification "connection".
Maybe you should report the message type too?

You copy the contents into the receive buffer anyway?

I think you should drop the remainder of the "connection"
if you see *any* corruption like this.  (I would argue
this is a bug as well, though maybe it "never happens.")


This is currently a case of "never happens". I think dropping remainder of the connection when this corruption happens is fine approach, too. I'll do that.

+
+    memcpy(connection->payload + connection->size, msg + sizeof(*hdr), payload_size);
+    connection->size += payload_size;
+    connection->fragments_received++;
+}
+
+static bool gh_rm_complete_connection(struct gh_rm_rpc *rsc_mgr,
+                    struct gh_rm_connection *connection)

This is called in one place, and it is always passed the active RX
connection pointer.  If true is returned, that pointer is nulled.
You could drop the second argument and just do the assignment
here instead.  (With the above-mentioned bug, this is also a
place where the non-null ERESTARTSYS pointer gets dererferenced.)


Same as above comment about tracking active_rx_connection.

+{
+    struct gh_rm_notif_complete *notif_work;
+
+    if (!connection)
+        return false;
+
+    if (connection->fragments_received != connection->num_fragments)
+        return false;
+
+    switch (connection->type) {
+    case RM_RPC_TYPE_RPLY:
+        complete(&connection->seq_done);
+        break;
+    case RM_RPC_TYPE_NOTIF:
+        notif_work = kzalloc(sizeof(*notif_work), GFP_KERNEL);
+        if (notif_work == NULL)
+            break;

Is there any signficant consequence possible from quietly
ignoring a notification from the resource manager?  Should
this situation be reported at least?

If you embedded the work structure in the connection structure
as I mentioned earlier, you could avoid this ever being a
problem.


Done by embedding the work structure in connection structure.

+
+        notif_work->conn = connection;
+        INIT_WORK(&notif_work->work,gh_rm_notif_work);
+
+        schedule_work(&notif_work->work);
+        break;
+    default:
+        dev_err(rsc_mgr->dev, "Invalid message type (%d) received\n", connection->type);
+        break;
+    }
+
+    return true;
+}
+
+static void gh_rm_abort_connection(struct gh_rm_connection *connection)

Although both callers immediately overwrite the rm->active_rx_connection
pointer after this call, you could pass the resource manager pointer
and make it NULL after the abort, so the old pointer is *gone*.

+{
+    switch (connection->type) {
+    case RM_RPC_TYPE_RPLY:
+        connection->ret = -EIO;
+        complete(&connection->seq_done);
+        break;
+    case RM_RPC_TYPE_NOTIF:
+        fallthrough;

The case statement isn't really valuable here.  You could
just do:

     if (connection->type == RM_RPC_TYPE_RPLY) {
         ... complete
     } else {
         ... free
     }

(Fine as-is though.)

+    default:
+        kfree(connection->payload);
+        kfree(connection);
+    }
+}
+
+static void gh_rm_msgq_rx_data(struct mbox_client *cl, void *mssg)
+{
+    struct gh_rm_rpc *rsc_mgr = container_of(cl, struct gh_rm_rpc, msgq_client);
+    struct gh_msgq_rx_data *rx_data = mssg;
+    void *msg = rx_data->data;
+    size_t msg_size = rx_data->length;
+    struct gh_rm_rpc_hdr *hdr;
+
+    if (msg_size <= sizeof(struct gh_rm_rpc_hdr)) {
+        dev_err(rsc_mgr->dev, "Incomplete message size: %ld is too small\n", msg_size);
+        return;
+    }

This is received data, so as long as you're verifying the message
size you should also ensure it's within the maximum allowed.  You
should also verify the header api byte is correct.


Done.

+
+    hdr = msg;
+    switch (FIELD_GET(RM_RPC_TYPE_MASK, hdr->type)) {
+    case RM_RPC_TYPE_NOTIF:

Here and in the other cases below, I think it's cleaner if you
move the check of the active_rx_connection poiner (whether it's
NULL or not) into the called functions.  That way they're all
checking based on their own requirements rather than having
that logic be here.

+        if (rsc_mgr->active_rx_connection) {
+            /* Not possible per protocol. Do something better than BUG_ON */ +            dev_err(rsc_mgr->dev, "Received start of new notification without finishing existing message series.\n");
+            gh_rm_abort_connection(rsc_mgr->active_rx_connection);
+        }
+        rsc_mgr->active_rx_connection = gh_rm_process_notif(rsc_mgr, msg, msg_size);
+        break;
+    case RM_RPC_TYPE_RPLY:
+        if (rsc_mgr->active_rx_connection) {
+            /* Not possible per protocol. Do something better than BUG_ON */ +            dev_err(rsc_mgr->dev, "Received start of new reply without finishing existing message series.\n");
+            gh_rm_abort_connection(rsc_mgr->active_rx_connection);
+        }
+        rsc_mgr->active_rx_connection = gh_rm_process_rply(rsc_mgr, msg, msg_size);
+        break;
+    case RM_RPC_TYPE_CONT:
+        if (!rsc_mgr->active_rx_connection) {
+            dev_err(rsc_mgr->dev, "Received a continuation message without receiving initial message\n");
+            break;
+        }
+        gh_rm_process_cont(rsc_mgr, rsc_mgr->active_rx_connection, msg, msg_size);
+        break;
+    default:
+        dev_err(rsc_mgr->dev, "Invalid message type (%lu) received\n",
+            FIELD_GET(RM_RPC_TYPE_MASK, hdr->type));
+        return;
+    }
+
+    if (gh_rm_complete_connection(rsc_mgr, rsc_mgr->active_rx_connection))
+        rsc_mgr->active_rx_connection = NULL;
+}
+
+static void gh_rm_msgq_tx_done(struct mbox_client *cl, void *mssg, int r)
+{
+    struct gh_rm_rpc *rsc_mgr = container_of(cl, struct gh_rm_rpc, msgq_client);
+
+    kfree(mssg);
+    rsc_mgr->last_tx_ret = r;
+}
+

It is allowable to pass a null req_buff pointer here.  The handling in
that case is a little different, and I think it's important to both
state that a null pointer is OK, and to explain what it means (or
how its processing is different).


Done.

+static int gh_rm_send_request(struct gh_rm_rpc *rsc_mgr, u32 message_id,
+                  const void *req_buff, size_t req_buff_size,
+                  struct gh_rm_connection *connection)
+{
+    size_t buff_size_remaining = req_buff_size;
+    const void *req_buff_curr = req_buff;
+    struct gh_rm_rpc_hdr *hdr;
+    u32 cont_fragments = 0;
+    size_t payload_size;
+    struct gh_msgq_tx_data *msg;
+    int i, ret;
+
+    if (req_buff_size)
+        cont_fragments = (req_buff_size - 1) / GH_RM_MAX_MSG_SIZE;
+
+    if (WARN(cont_fragments > GH_RM_MAX_NUM_FRAGMENTS,
+         "Limit exceeded for the number of fragments: %u\n", cont_fragments))
+        return -E2BIG;

You could just do:

   if (WARN(req_buff_size > GH_RM_MAX_MSG_SIZE * GHRM_MAX_NUM_FRAGMENTS,
       ...

And then your loop below could just do:

     u8 type = RM_RPC_TYPE_REQ;

     while (req_buff_size) {
         payload_size = max(buff_size_remaining,
                    GH_RM_MAX_MSG_SIZE);

         req_buff_size -= payload_size;
             ...
         msg->push = !req_buff_size;
             ...
         type = RM_RPC_TYPE_CONT;
     }


Done.

+
+    ret = mutex_lock_interruptible(&rsc_mgr->send_lock);
+    if (ret)
+        return ret;
+
+    /* Consider also the 'request' packet for the loop count */
+    for (i = 0; i <= cont_fragments; i++) {
+        if (buff_size_remaining > GH_RM_MAX_MSG_SIZE) {
+            payload_size = GH_RM_MAX_MSG_SIZE;
+            buff_size_remaining -= payload_size;
+        } else {
+            payload_size = buff_size_remaining;
+        }
+
+        msg = kzalloc(sizeof(*msg)+ GH_MSGQ_MAX_MSG_SIZE, GFP_KERNEL);

Use:
     msg = kzalloc(sizeof(*msg) + payload_size, GFP_KERNEL);

But even better:
     msg = kzalloc(struct_size(msg, data, payload_size),GFP_KERNEL);

OR...  since these buffers are always 256 bytes apiece, you could
create a slab cache so they're allocated efficiently.


Will switch to kmem_cache.

+        if (!msg) {
+            ret = -ENOMEM;
+            gotoout;
+        }
+
+        /* Fill header */
+        hdr = (struct gh_rm_rpc_hdr *)msg->data;
+        hdr->api = FIELD_PREP(RM_RPC_API_VERSION_MASK, RM_RPC_HDR_VERSION_ONE) |
+                FIELD_PREP(RM_RPC_HEADER_WORDS_MASK, RM_RPC_HDR_WORDS);

I suggested defining this api value at the top, since it's
constant for a given build.

Ack.

+        hdr->type = FIELD_PREP(RM_RPC_TYPE_MASK,
+                    i == 0 ? RM_RPC_TYPE_REQ : RM_RPC_TYPE_CONT) |
+                FIELD_PREP(RM_RPC_FRAGMENTS_MASK, cont_fragments);

I think FIELD_PREP() (and u32_encode_bits()) can look a
little cumbersome.  I think this would be more readable:

     u8 type = i ? RM_RPC_TYPE_CONT : RM_RPC_TYPE_REQ;

     hdr->type = FIELD_PREP(RM_RPC_TYPE_MASK, type);
     hdr->type |= FIELD_PREP(RM_RPC_FRAGMENTS_MASK, cont_fragments);


+        hdr->seq = cpu_to_le16(connection->seq);
+        hdr->msg_id = cpu_to_le32(message_id);
+
+        /* Copy payload */

Maybe:
         void *payload = hdr + 1;
         ...
         memcpy(payload, req_buff_curr, payload_size);

+        memcpy(msg->data + sizeof(*hdr), req_buff_curr, payload_size);
+        req_buff_curr += payload_size;
+
+        /* Force the last fragment to immediately alert the receiver */
+        msg->push = i == cont_fragments;
+        msg->length = sizeof(*hdr)+ payload_size;
+
+        ret = mbox_send_message(gh_msgq_chan(&rsc_mgr->msgq), msg);
+        if (ret < 0) {
+            kfree(msg);
+            break;
+        }
+
+        if (rsc_mgr->last_tx_ret) {
+            ret = rsc_mgr->last_tx_ret;
+            break;
+        }
+    }
+
+out:
+    mutex_unlock(&rsc_mgr->send_lock);
+    return ret < 0 ? ret : 0;
+}
+
+/**
+ * gh_rm_call: Achieve request-response type communication with RPC

     * @rsc_mgr:  ...

+ * @message_id: The RM RPC message-id
+ * @req_buff: Request buffer that contains the payload
+ * @req_buff_size: Total size of the payload
+ * @resp_buf: Pointer to a response buffer
+ * @resp_buff_size: Size of the response buffer
+ *
+ * Make a request to the RM-VM and wait for reply back. For a successful
+ * response, the function returns the payload. The size of the payload is set in
+ * resp_buff_size. The resp_buf should be freed by the caller.
+ *
+ * Context: Process context. Will sleep waiting for reply.
+ * Return: >0 is standard reply error from RM. <0 on internal error.
+ */
+int gh_rm_call(struct gh_rm_rpc *rsc_mgr, u32 message_id, void *req_buff, size_t req_buff_size,
+        void **resp_buf, size_t *resp_buff_size)
+{
+    struct gh_rm_connection *connection;
+    int ret;
+
+    /* messaged_id 0 is reserved */
+    if (!message_id)
+        return -EINVAL;
+

Maybe check for null rsc_mgr first.


Every caller is guaranteed to have valid rm pointer.

+    if (!rsc_mgr)
+        return -EPROBE_DEFER;
+
+    connection = gh_rm_alloc_connection(message_id, RM_RPC_TYPE_RPLY);
+    if (!connection)
+        return -ENOMEM;
+
+    init_completion(&connection->seq_done);
+
+    /* Allocate a new seq number for this connection */
+    if (mutex_lock_interruptible(&rsc_mgr->call_idr_lock)) {

Maybe use the goto ... pattern here.

+        kfree(connection);
+        return -ERESTARTSYS;
+    }
+    connection->seq = idr_alloc_cyclic(&rsc_mgr->call_idr, connection, 0, U16_MAX, GFP_KERNEL);

Note that idr_alloc_cyclic() *can* return an error.


Done.

+    mutex_unlock(&rsc_mgr->call_idr_lock);
+
+    /* Send the request to the Resource Manager */
+    ret = gh_rm_send_request(rsc_mgr, message_id, req_buff, req_buff_size, connection);
+    if (ret < 0)
+        goto out;
+
+    /* Wait for response */
+    ret = wait_for_completion_interruptible(&connection->seq_done);
+    if (ret)
+        goto out;
+
+    if (connection->ret) {
+        ret = connection->ret;

I note that this is a negative errno.  (You do explain
that non-zero return means error above.)

+        kfree(connection->payload);
+        goto out;
+    }
+
+    if (connection->rm_error) {
+        ret = connection->rm_error;

While this is positive resource manager error (with one exception
I mentioned earlier).

+        kfree(connection->payload);
+        goto out;
+    }
+
+    *resp_buf = connection->payload;
+    *resp_buff_size = connection->size;
+
+out:
+    mutex_lock(&rsc_mgr->call_idr_lock);

Why is the mutex_lock() here not interruptible?  Or rather, if
you can do a non-interruptible wait here, why not above?


I've removed the interruptible call_idr_lock because all the sections which use are quick.

+    idr_remove(&rsc_mgr->call_idr, connection->seq);
+    mutex_unlock(&rsc_mgr->call_idr_lock);
+
+    kfree(connection);
+    return ret;
+}
+
+static int gh_msgq_platform_probe_direction(struct platform_device *pdev,
+                    u8 gh_type, int idx, struct gunyah_resource *ghrsc)

I think I might call this gh_msgq_platform_probe_msgq() and pass a
Boolean indicating whether it's being called for the RX (versus TX)
message queue.  Then deduce the gh_type and the index from that
argument.


Done.

                     -Alex

+{
+    int ret;
+    struct device_node *node = pdev->dev.of_node;
+
+    ghrsc->type = gh_type;
+
+    ghrsc->irq = platform_get_irq(pdev, idx);
+    if (ghrsc->irq < 0) {
+        dev_err(&pdev->dev, "Failed to get irq%d: %d\n", idx, ghrsc->irq);
+        return ghrsc->irq;
+    }
+
+    ret = of_property_read_u64_index(node, "reg", idx,&ghrsc->capid);
+    if (ret) {
+        dev_err(&pdev->dev, "Failed to get capid%d: %d\n", idx, ret);
+        return ret;
+    }
+
+    return 0;
+}
+
+static int gh_rm_drv_probe(struct platform_device *pdev)
+{
+    struct gh_rm_rpc *rsc_mgr;
+    int ret;
+
+    rsc_mgr = devm_kzalloc(&pdev->dev, sizeof(*rsc_mgr), GFP_KERNEL);
+    if (!rsc_mgr)
+        return -ENOMEM;
+
+    platform_set_drvdata(pdev, rsc_mgr);
+    rsc_mgr->dev = &pdev->dev;
+
+    mutex_init(&rsc_mgr->call_idr_lock);
+    idr_init(&rsc_mgr->call_idr);
+    mutex_init(&rsc_mgr->send_lock);
+
+    ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_TX, 0,
+                        &rsc_mgr->tx_ghrsc);
+    if (ret)
+        return ret;
+
+    ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_RX, 1,
+                        &rsc_mgr->rx_ghrsc);
+    if (ret)
+        return ret;
+
+    rsc_mgr->msgq_client.dev = &pdev->dev;
+    rsc_mgr->msgq_client.tx_block = true;
+    rsc_mgr->msgq_client.rx_callback = gh_rm_msgq_rx_data;
+    rsc_mgr->msgq_client.tx_done = gh_rm_msgq_tx_done;
+
+    return gh_msgq_init(&pdev->dev, &rsc_mgr->msgq, &rsc_mgr->msgq_client,
+                &rsc_mgr->tx_ghrsc, &rsc_mgr->rx_ghrsc);
+}
+
+static int gh_rm_drv_remove(struct platform_device *pdev)
+{
+    struct gh_rm_rpc *rm = platform_get_drvdata(pdev);
+
+    mbox_free_channel(gh_msgq_chan(&rm->msgq));
+    gh_msgq_remove(&rm->msgq);
+
+    return 0;
+}
+
+static const struct of_device_id gh_rm_of_match[] = {
+    { .compatible = "gunyah-resource-manager" },
+    {}
+};
+MODULE_DEVICE_TABLE(of, gh_rm_of_match);
+
+static struct platform_driver gh_rm_driver = {
+    .probe = gh_rm_drv_probe,
+    .remove = gh_rm_drv_remove,
+    .driver = {
+        .name = "gh_rsc_mgr",
+        .of_match_table = gh_rm_of_match,
+    },
+};
+module_platform_driver(gh_rm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Gunyah Resource Manager Driver");
diff --git a/drivers/virt/gunyah/rsc_mgr.h b/drivers/virt/gunyah/rsc_mgr.h
new file mode 100644
index 000000000000..b5bb36a7a4cc
--- /dev/null
+++ b/drivers/virt/gunyah/rsc_mgr.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#ifndef __GH_RSC_MGR_PRIV_H
+#define __GH_RSC_MGR_PRIV_H
+
+#include <linux/gunyah.h>
+#include <linux/types.h>
+
+/* RM Error codes */
+#define GH_RM_ERROR_OK            0x0
+#define GH_RM_ERROR_UNIMPLEMENTED    0xFFFFFFFF
+#define GH_RM_ERROR_NOMEM        0x1
+#define GH_RM_ERROR_NORESOURCE        0x2
+#define GH_RM_ERROR_DENIED        0x3
+#define GH_RM_ERROR_INVALID        0x4
+#define GH_RM_ERROR_BUSY        0x5
+#define GH_RM_ERROR_ARGUMENT_INVALID    0x6
+#define GH_RM_ERROR_HANDLE_INVALID    0x7
+#define GH_RM_ERROR_VALIDATE_FAILED    0x8
+#define GH_RM_ERROR_MAP_FAILED        0x9
+#define GH_RM_ERROR_MEM_INVALID        0xA
+#define GH_RM_ERROR_MEM_INUSE       0xB
+#define GH_RM_ERROR_MEM_RELEASED    0xC
+#define GH_RM_ERROR_VMID_INVALID    0xD
+#define GH_RM_ERROR_LOOKUP_FAILED    0xE
+#define GH_RM_ERROR_IRQ_INVALID        0xF
+#define GH_RM_ERROR_IRQ_INUSE       0x10
+#define GH_RM_ERROR_IRQ_RELEASED    0x11
+
+struct gh_rm_rpc;
+int gh_rm_call(struct gh_rm_rpc *rsc_mgr, u32 message_id, void *req_buff, size_t req_buff_size,
+        void **resp_buf, size_t *resp_buff_size);
+
+#endif
diff --git a/include/linux/gunyah_rsc_mgr.h b/include/linux/gunyah_rsc_mgr.h
new file mode 100644
index 000000000000..b4f55c19954b
--- /dev/null
+++ b/include/linux/gunyah_rsc_mgr.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _GUNYAH_RSC_MGR_H
+#define _GUNYAH_RSC_MGR_H
+
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/gunyah.h>
+
+#define GH_VMID_INVAL    U16_MAX
+
+/* Gunyah recognizes VMID0 as an alias to the current VM's ID */
+#define GH_VMID_SELF            0
+
+#endif




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux